5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • We have been battling an on and off issue with registration verification emails not being sent out with certain users. We have finally got the issue resolved so if you have tried registering for the site but have not received a verification email, just request another verification email when you log in and you should now receive it. If you still don't receive the verification email, send us an email at [email protected] and we will get it resolved for you. Thanks!

Hessler

New Member
Joined
Nov 26, 2019
Messages
2
Reaction score
1
I purchased the ReadyLift 67-1500 UCA’s to go with the MotoFab 2.5” Leveling Kit and just wanted to make sure these UCA’s will fit on the 5th gens. I’ve seen people say they fit fine even though they’re meant for the 4th Gens but just wanted to verify.
 

Attachments

  • 05DE003B-A401-4389-AE1C-B8F31F486F96.png
    05DE003B-A401-4389-AE1C-B8F31F486F96.png
    215.4 KB · Views: 39

NV2019

New Member
Joined
Sep 22, 2019
Messages
4
Reaction score
1
Jump on their web site, or call them, they are pretty good folks, I got the 66-1921 P/N which had their top strut spacers as well, but wound-up using my Moto-Fab spacers, which I know fit a wide Ram gen series. If I still had packaging the UCA's came in, it had the P/N on the bag but no number on the arms themselves, and 67-1500 does ring a memory bell. Mine did howerver come with the OE style bushings installed, an upgrade since the red poly ones looked cool but made excessive noise if not silicon greased frequently. I think they should work, if you strap them in, have it aligned anyway after you get it all together.
 

Users who are viewing this thread

Top