Lol, I can’t get lucky enough for mine to crack. I’ve been waiting for it to happen for two years since I added rain sensing wipers to my 2017.So yes, i mounted it in the center best i could. I will adjust the angle now that i know what that needs to be. I played around with Alpha on windows and was able to connect and clear the DTCs for the DASM but one still remains - C2206. There isn't an option for the 2019 RAM calibration but there is for 14-17 jeep Cherokee. Unfortunately i think because they are completely different units the calibration won't work. I emailed Alexey and asked if he could add the feature for the 5th Gen Rams. He said he would include it in the next update and will send me the beta version once he adds it. I'm confident this is the final step that needs to be completed.
Eventually i plan on getting the correct windshield, but i'm waiting for a rock to hit mine and crack it so i can just claim insurance and get it for cheap. A new windshield and calibration procedure cost about $800-900 ($300 of that is calibration).
The purpose of this thread is “how to add it”, not “what does everyone think of it”. I’d rather just oblige and help try to figure it out, instead of clogging up the thread. Do you have any thoughts on how to get it enabled?Lanes sense is a waist of money and a waist of your time to put in.
Sent from my iPhone using Tapatalk Pro
The purpose of this thread is “how to add it”, not “what does everyone think of it”. I’d rather just oblige and help try to figure it out, instead of clogging up the thread. Do you have any thoughts on how to get it enabled?
Hey everyone.
Any progress to report? I am definitely interested in what everybody has figured out.
I pick up my new Rebel this week, and these are the one package I couldn’t get (end of the 2020 model year, and the 2021’s are supposed to be $3000 more with no incentives).......
Thx!
Lanes sense is a waist of money and a waist of your time to put in.
Sent from my iPhone using Tapatalk Pro
^^^^ THIS!!!
I came out of a '16 Honda Pilot Touring - where "Lane Sense" was almost as good as Tesla's "auto pilot". That car could steer you through curves and stay centered in the lane. So I had "high expectations" for a newer version of this tech.
It is VIRTUALLY USELESS and more of an annoyance on this RAM. Probably the one feature that is the BIGGEST DISAPPOINTMENT (for me at least) of all the "bells & whistles" on the truck. It "tugs at the wheel a little" - more of a distraction than an aid, and does (literally) ZERO to actually "assist" in staying in the lane.
When you consider all the cameras and sensors - and a truck that can parallel park itself - the inability of this system to do something as simple as keep the truck centered in a lane (or at least IN THE LANE), is almost INSULTING.
Now - even if I KNEW it was so poorly implemented - it would't have prevented me from purchasing. And since it's part of a package - the choice of not ordering with it really isn't an option.
But to SPEND ADDITIONAL MONEY TO ADD IT ON AFTER THE FACT - solely to add this nearly useless feature - you might as well just BURN IT.
Rick
Great post. I'm have learned so much from this. Please keep up the good work. Leaning these details about our trucks can is a must. Wondering if you could do this but with the Blind spot warning. My truck doesn't have it and I would really like to add this. I see the infotainment over the side view mirror and tail light kit. Is. That really all we need?.as I stated before I’m less interested in the lane assist than I am the adaptive cruise control. They pretty much go hand in hand. My plans are to improve the stock lane sense and ACC to add full self driving to the truck through comma 2 and openpilot. I’m working with some of those developers to bring support to RAM. So I’m not really concerned on how well stock lane sense operates. I just need control of the steering over the canbus so I can intercept the signal and send my own.
Blind spot monitoring is possible! I added it myself. I have a pdf write up on the thread on this site. I’ll see if I can find it.Great post. I'm have learned so much from this. Please keep up the good work. Leaning these details about our trucks can is a must. Wondering if you could do this but with the Blind spot warning. My truck doesn't have it and I would really like to add this. I see the infotainment over the side view mirror and tail light kit. Is. That really all we need?.
Please!!!!Blind spot monitoring is possible! I added it myself. I have a pdf write up on the thread on this site. I’ll see if I can find it.
Post in thread 'Is it possible to add Blind Spot?'Please!!!!
I have a 2021 RAM 1500 with Lane Sense and ACC i am also very interested in comma.ai I assume that is what this is about. I would like to help in the development of this to make it compatable for my truck if i canSo i've managed to get the DTC in the cruise control module down to "C2206 - vehicle configuration mismatch"
I assume this means i haven't selected the correct settings in the BCM. I'm hoping it's just a matter of getting the correct configuration. I am trying to gather more vehicle configurations so i can compare them to mine. If anyone reading has ACC, Lane assist, etc and could send their vehicle configuration that'd be huge. If anyone has any insight it is much appreciated.
Current status in the DASM is as follows:
ECU Qualification:
RLS: Not set
AHBM: Not set
HUM: Set
COM: Set
UAM: Set
Theft Deterrent Present: No
Power Locks Present: Yes
Ambient Lighting Present: No
Approach Lamps Present: No
Side Repeaters Present: No
UGDO Theft Disable Present: No
RKE Present: No
Front Fog Lights Present: No
Tip Start Present: No
Remote Start Present: No
Reprogramming Attempt Counter:
Number of Reprogramming Attempts - Block 1: 0
Max. Number of Reprogramming Attempts: Block 1: 1000
Number of Reprogramming Attempts - Block 2: 0
Max. Number of Reprogramming Attempts: Block 2: 1000
In-Plant Status: Not active
Sensor Has Been Aligned: Yes
Response on Event - light activation state: Activated
Ignition Voltage: 12.40
Blindness Counter: 119
Bussed Inputs:
System Voltage: 12.40 V
Averaged Ambient Temperature: -40.00 Deg.C
Vehicle speed: 0.00 km/h
Ignition Switch Status: RUN Position
PRND Status from Trans: Park
Cruise Control Cancel Switch: Not set
ACC Distance Decrease Switch: Not set
SCM Cruise Control Set/Accel Sw: Not set
SCM Cruise Control Coast/Set/Decel Sw: Not set
Cruise Control Resume Switch: Not set
SCM Cruise Control Implausible: Not set
SCM Cruise Control On/Off Sw: Not set
SCM ACC On/Off Sw: Not set
SCM ACC Distance Increase Sw: Not set
ACC Can Be Enabled per ESP: Set
Trans in Limp Home Mode: Not set
Motor ACC is OK: Yes
Brake ACC is OK: No
Electronic Park Brake: Open
Join the comma discord. That’ll give us the best chance to get working. I’m till trying to get the stock ACC and LaneSense working, but you could be helpful in the development of the comma for RAMI have a 2021 RAM 1500 with Lane Sense and ACC i am also very interested in comma.ai I assume that is what this is about. I would like to help in the development of this to make it compatable for my truck if i can
^^^^ THIS!!!
I came out of a '16 Honda Pilot Touring - where "Lane Sense" was almost as good as Tesla's "auto pilot". That car could steer you through curves and stay centered in the lane. So I had "high expectations" for a newer version of this tech.
It is VIRTUALLY USELESS and more of an annoyance on this RAM. Probably the one feature that is the BIGGEST DISAPPOINTMENT (for me at least) of all the "bells & whistles" on the truck. It "tugs at the wheel a little" - more of a distraction than an aid, and does (literally) ZERO to actually "assist" in staying in the lane.
When you consider all the cameras and sensors - and a truck that can parallel park itself - the inability of this system to do something as simple as keep the truck centered in a lane (or at least IN THE LANE), is almost INSULTING.
Now - even if I KNEW it was so poorly implemented - it would't have prevented me from purchasing. And since it's part of a package - the choice of not ordering with it really isn't an option.
But to SPEND ADDITIONAL MONEY TO ADD IT ON AFTER THE FACT - solely to add this nearly useless feature - you might as well just BURN IT.
