Post your lowered 5th gens

[Clv22p]

Like the title says. I want to see everyone’s lowered 5th gens.

Post a picture and a description of your setup!


Maxtrac 2/4
Bilstein 5100 rear shocks
Spohn adjustable panhard bar
Hellwig sway bar and end links
Core 4x4 rear lower control arms
View attachment 126324

What rear swaybar end links are you running? If Helwig do you have the part number?

 

[Mopar_maxi]

What rear swaybar end links are you running? If Helwig do you have the part number?

Hellwig 7961 Hellwig Adjustable End Links | Summit Racing

Free Shipping - Hellwig Adjustable End Links with qualifying orders of $99. Shop Sway Bar End Links at Summit Racing.

www.summitracing.com

 

[ferraiolo1]

Sent from my iPhone using Tapatalk

 

[Rock Crawler]

 

[Mopar_maxi]

 

[MLB12]

So I see what the 3/5 swap looks like, and this is where I'd like to go.

In looking at that particular swap it is obviously doable on the 4 x 4 DTs, but I can't see, or may have missed it, but has anyone done a lowering swap on a 4-corner factory air ride truck? And if so, been able to retain all the features of the air ride?

All input will be appreciated.

 

[Rock Crawler]

So I see what the 3/5 swap looks like, and this is where I'd like to go.

In looking at that particular swap it is obviously doable on the 4 x 4 DTs, but I can't see, or may have missed it, but has anyone done a lowering swap on a 4-corner factory air ride truck? And if so, been able to retain all the features of the air ride?

All input will be appreciated.

Might check here.

How to lowring on air ride suspension

Update Nov 29, 2021 Yes I did it :) I manage to drop my RAM 4/6" with air ride, and it is so much that you can not have your fingers between the tire and inner fender, and it still have the same driving comfort as OEM air suspension. I do not know how much weight it can handle now, but I have...

5thgenrams.com

 

[1LowTrk]

I feel I’m cheating. Revel links with the bumps completely cut out and replaced with BellTech bump stops.

 

[ferraiolo1]

How are you alignment specs when it’s low?


Sent from my iPhone using Tapatalk

 

[User_67930]

View attachment 136722 View attachment 136723
I feel I’m cheating. Revel links with the bumps completely cut out and replaced with BellTech bump stops.

Good looking truck!

 

[1LowTrk]

How are you alignment specs when it’s low?


Sent from my iPhone using Tapatalk

Not sure, feels straight when driving. Today, the truck only has 1,000 miles! Haven’t needed to touched the suspension besides adding the revel links and cutting out the bump stops. On Monday, I’m gonna follow your advise and I’m gonna pull the trigger on some new rear shocks. I’m going with QA1 TD902’s and see if that helps lower the rear inline with the front. At that point, I’ll obviously get a alignment. I’ll snap a pic of the screen when completed.