5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • We have been battling an on and off issue with registration verification emails not being sent out with certain users. We have finally got the issue resolved so if you have tried registering for the site but have not received a verification email, just request another verification email when you log in and you should now receive it. If you still don't receive the verification email, send us an email at [email protected] and we will get it resolved for you. Thanks!

In-depth review of Flowmaster Super 10 with factory resonators

spb_sloram

Active Member
Joined
Feb 24, 2019
Messages
40
Reaction score
46
Hey everyone! Just thought I’d throw this out there for anyone who needs help picking out an exhaust for their truck. If you want something to wake it up a little bit, but not be too over the top then this exhaust is for you.

Flowmaster Super 10 video

I’ve got some comparisons between stock and with it, some clips of the interior with and without the windows open, close up clips, and even some parts where I mark the sound difference when MDS is active.
Enjoy!
 
Last edited:

2020GraniteBH

Active Member
Joined
Oct 14, 2019
Messages
138
Reaction score
72
Hey everyone! Just thought I’d throw this out there for anyone who needs help picking out an exhaust for their truck. If you want something to wake it up a little bit, but not be too over the top then this exhaust is for you.

Flowmaster Super 10 video

I’ve got some comparisons between stock and with it, some clips of the interior with and without the windows open, close up clips, and even some parts where I mark the sound difference when MDS is active.
Enjoy!

What a great video thanks for doing all of the different variables and sharing this with us! I actually ordered this muffler today and having it installed on Friday so I'm glad I found this in the search. Doesn't seem like there is any drone while cruising and sounds great when you open it up!
 

2020GraniteBH

Active Member
Joined
Oct 14, 2019
Messages
138
Reaction score
72
Just got it on today love it so far. I left the resonators on for now. I did notice that when I went to pull it in the driveway after it sat for a bit my RPMS were surging between 1000-1500 which was very weird and out of the ordinary. Anyone experience this?
 

spb_sloram

Active Member
Joined
Feb 24, 2019
Messages
40
Reaction score
46
Glad you guys enjoyed the video and thanks for the support! Planning on cutting off the first resonator, I’ll share a link once I do it and make a new video for it!
 

davisenvy

Member
Joined
Aug 11, 2020
Messages
14
Reaction score
1
That sounds perfect! Do you have a part number so I can make sure I order the right part?
 

dtlrshp

Active Member
Joined
Aug 18, 2020
Messages
36
Reaction score
30
Location
bay area, ca
I've also the Super 10's. Started with the resonators on and weep holes plugged, then went back and cut off the resonators a week later. Sounds way better without the resonators
 

spb_sloram

Active Member
Joined
Feb 24, 2019
Messages
40
Reaction score
46
My truck has the weep holes welded shut at the moment. Going to give removing just that first resonator a shot, and see how much it changes it. Will most likely make a video of that one as well. I like it now, but I’d like a little bit more rasp at higher RPM.

Quick side note - a friend nearby installed a CORSA exhaust on his a few weeks ago. Made a video of that one too for anyone who’s curious :D Definitely a completely different tone than the Flowmaster.

2019 Ram 1500 CORSA Sport Exhaust

If anyone on here is in the MA area and wants to record a video, let me know!
 

MarvsAMartian

Well-Known Member
Joined
Aug 26, 2020
Messages
265
Reaction score
142
Location
Canada
My truck has the weep holes welded shut at the moment. Going to give removing just that first resonator a shot, and see how much it changes it. Will most likely make a video of that one as well. I like it now, but I’d like a little bit more rasp at higher RPM.

Quick side note - a friend nearby installed a CORSA exhaust on his a few weeks ago. Made a video of that one too for anyone who’s curious :D Definitely a completely different tone than the Flowmaster.

2019 Ram 1500 CORSA Sport Exhaust

If anyone on here is in the MA area and wants to record a video, let me know!

Wish I did a bit more research about the weep holes in the resonators. I just got a muffler delete (almost went Super 10) yesterday and I didn't notice the leaking sound until I remote started my truck. Can't hear it from the inside obviously and when its warmed up it seems to go away but I definitely should call up my shop and ask them to weld em shut. Unlike a lot of people I don't mind it being "quiet".
 

2020GraniteBH

Active Member
Joined
Oct 14, 2019
Messages
138
Reaction score
72
I've also the Super 10's. Started with the resonators on and weep holes plugged, then went back and cut off the resonators a week later. Sounds way better without the resonators
Any increase in drone with the resonators off?
 

davisenvy

Member
Joined
Aug 11, 2020
Messages
14
Reaction score
1
Can you tell me if you used a Flowmaster 2.5 or 3 inch? I have listened to video's and there does seem to be a difference.
 

gHiDoRa

Ram Guru
Joined
Jun 15, 2019
Messages
669
Reaction score
286
Location
Elvis Presley
Wish I did a bit more research about the weep holes in the resonators. I just got a muffler delete (almost went Super 10) yesterday and I didn't notice the leaking sound until I remote started my truck. Can't hear it from the inside obviously and when its warmed up it seems to go away but I definitely should call up my shop and ask them to weld em shut. Unlike a lot of people I don't mind it being "quiet".

You can use the J-B Weld HighHeat Epoxy to fill the weep holes.
 

djdnl

Active Member
Joined
Feb 6, 2020
Messages
35
Reaction score
56
Location
Alberta, Canada
Thanks for the video. I have a quote for $400 cad for a Flowmaster 10 installed and welded. Is that crazy high?
 

Users who are viewing this thread

Top