With the first of the big three upgrades complete (trailer brake controller, PE, 33 gallon) I've ordered all the parts and pieces to install the PE system on my truck that should of included it from the factory by default.
$206.70 Handles inc chrome trim, Caps and antenna
$ 61.82 Wire, TE parts (Mouser)
$ 20.08 Aptiv Terminals (Newark via UK warehouse)
$ 107.75 Yazaki Shell and terminals (Nexus electronics)
$ 30.00 Approx. Misc supplies already on hand
TOTAL $426.35
It cost me a little more then double on the wiring side to DIY in lieu of buying the pre-made assembly from a member here. I am more then capable, love the project and will end up with enough to do the project 10 times over for the added cost and trouble. I will say.... I do think his price is a great value to most anyone else. I sure wouldn't want to mess with it for as cheap as he is asking
Preliminary thoughts / notes....
The Yazaki terminals PN shown on post 8 are listed in the MGF catalog as being for 22ga wire. The PN for ones using 18 AWG wire show to be 7116-4721-02 That is what I ordered.
The rear antenna shell terminals listed are specified from the mfg to allow .14mmto .25mm wire. for 22 AWG the MFG shows the next size in that series to be PN 928999-1 so that is what I ordered. Here is the real kicker.... neither of those two numbers are what is spec'd for that shell by TE. neither is the seal. Maybe an updated PN?? if there are problems with fitment I'll post an update