Not sure, i got mine from Jimmy07 on this forum. Quality harness for both doors and rear antenna. He even labels the wires for the terminal they go into and driver/passenger.Does any one know if this harness that’s sold by Mopar, is the harness that plugs into the door handles and the wire loom to the door body for adding the passive door lock?
It doesn’t have the ends to plug into the door, and might not be long enough on page one you can see the part numbers and add the ends, or make you own wires or pay jimmy.Does any one know if this harness that’s sold by Mopar, is the harness that plugs into the door handles and the wire loom to the door body for adding the passive door lock?
You do if you want the tailgate to be passive. You might get better communication with it, but it isn't required.I'm going to make my own harness. Do I need the rear antenna? I only want the 2 front doors to be passive
I don't need it to be passive. My 14 has passive locks without the tailgate and I was fine with it. After looking through the post someone mentioned an error code because the didn't install the rear antenna. They had to change am ap5 trunk setting in alpha obd?You do if you want the tailgate to be passive. You might get better communication with it, but it isn't required.
This is the easiest part. Looking up from under the spare tire, on the left side is a plug with a dummy cap plugged into it. Plug your antenna in to this plug. That’s it!
Yes according to him if you have a heavy duty 2500 it is there is 1500 its notOk. Ima little confused on the rear antenna install. It's shows a parts for installing the antenna but this is saying you just find the plug and plug it in?