5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

34's vs 35's

Running Nitto Ridge Grappler 295/65r20 on 20x9 Fuel Vapor with 2" Rough Country leveling strut. It's more of 2.5 inch level once it settles. Love them so far. Drove a 2020 Trail Boss for a week and the 35" Nitto Ridge drives smoother and quieter
Had to settle for the Toyo's as custom offsets said the couldn't get the RG's after I paid for and waited two months. Luv the RG's though not unhappy with the Toyo's either Wm.
BTS abrams 9.jpgBTS abrams II.jpg
 
34" 275/65/R20 Cooper Discovery AT3 on Ram 1500 Laramie with ORG. Like the look. 53D920CF-5874-4A72-9876-3D2045FEF9C3.jpg
 
2” Readylift level
285/60/20 Toyo Open Country ATIII tires
20x9 +1 Fuel Rebel wheels

Originally I had the wheels in 20x10 with a -18 offset. I loved the look, but they rubbed quite a bit and I didn’t want to do any cutting. Im still more than happy with the current setup though. 11CA7212-B3E3-4BAE-B55E-A0D5B1FE26F5.jpeg
 

Attachments

  • D535CF95-71DC-462F-AD3E-9A91BE1A218D.jpeg
    D535CF95-71DC-462F-AD3E-9A91BE1A218D.jpeg
    173.1 KB · Views: 257
35's (295/65r20) 2" level
b728a144733e2a80777064ad5dd25137.jpg
4f1373ad4698b898c9384c0fb27d5601.jpg
86d88486421e48fdfb57d31a425121f0.jpg
183d0ff243c626cb8ac5c04bbd068331.jpg


Sent from my SM-N976V using Tapatalk
THis looks great. any rubbing or trimming needed to run these?
 
2” Readylift level
285/60/20 Toyo Open Country ATIII tires
20x9 +1 Fuel Rebel wheels

Originally I had the wheels in 20x10 with a -18 offset. I loved the look, but they rubbed quite a bit and I didn’t want to do any cutting. Im still more than happy with the current setup though. View attachment 104350
I'm looking at the same rims and have a 2" motofab. Do you have any side shots? trying to decide how big of a tire to get to fill out the wheel well just a bit more and I'm getting tired of the stock tires looking like my truck skipped leg day.
 
I'm looking at the same rims and have a 2" motofab. Do you have any side shots? trying to decide how big of a tire to get to fill out the wheel well just a bit more and I'm getting tired of the stock tires looking like my truck skipped leg day.
8BC746F4-0D2F-46AC-94F7-A311B78663B7.jpeg
 
Just recently installed 22x9 Vossens on Nitto Ridge Grapplers 35x12.5R22, already had spacers before. Love the new look, but did rub a little. Had to get rid of the little mini mud flap that comes on the Rebels. Also, I have the front Bilstein shocks to level it out. Overall, couldn't be happier minus the gas mileage hit lol. Speaking of, does anyone know if that affects the calculation itself since now the speedometer is off? How could I go about fixing that if there's a way to change the computer settings?
IMG_1544.jpeg
IMG_1543.jpegIMG_1565.jpegIMG_1545.jpeg
 
Finally finished with my level with new wheels and 34" tires. I now sit at 41.25" rear on both sides, 40" front. Couldn't be happier with my choices. Based on the modest budget i used im very happy.

Before tires
20210921_125526~2.jpg
After
20210921_152307.jpg
20210921_170446.jpg
20210921_152327.jpg
20210921_152314.jpg
 

Attachments

  • 20210921_125526~2.jpg
    20210921_125526~2.jpg
    228.7 KB · Views: 95
Last edited:
  • Like
Reactions: c3k
285/70r18 Ridge Grapplers. Mathematically come out to 33.9”. Mounted I’m right at 33.0”.
6112s set at 2.6
1” block in the rear
 

Attachments

  • 56C532EE-4C99-4B72-9055-26F1E7EEF4D7.jpeg
    56C532EE-4C99-4B72-9055-26F1E7EEF4D7.jpeg
    139.2 KB · Views: 285
  • BBCE52E1-2B5B-4A21-AB39-D11444138C49.jpeg
    BBCE52E1-2B5B-4A21-AB39-D11444138C49.jpeg
    213.1 KB · Views: 284
35x12.5x22 Venom Power Hunter XT
Stock 22 factory rims
3.5 RL SST
.25 (1/4) wheel spacers
Slight rub reverse full lock
Pictures definitely don’t do justice!
Much taller in person!
d37dd0c07c60c95b84a4b899deabfa1c.jpg

39c9160c45aada4e051d4a37debe4fc8.jpg

18a86ed23f8c8210852d31621fb2d55a.jpg

33647422fdac18937e5e5b735c2405c3.jpg



Sent from my iPhone using Tapatalk
d65ef423965f7a61a76358309c370513.jpg
@nivek1411 are you running the 3.21 or 3.94? I’m looking to do the same (2” level and 35x12.50s) but have concerns about the 3.21 not be able to push the 35s
 
Hey All

for some feedback on running 35s with the 3.21 rear. My mechanic raised concerns that it could “significantly impact” off the line and hi-way performance.

Currently running stock 285/45r22s on a 2021 Limited Black Night Edition with 5.7 Hemi w/Air Ride. Planning on 2” Revel/Daystar Leveling kit with new UCA’s.

I get I’ll be sacrificing some of the off the line performance but concerned the 3.21 might not be able to turn the 35s
 

Users who are viewing this thread

Staff online

Back
Top