2025 Ram 1500 Current Owners - Discussion, Feedback, and Problems

[RamTruckMan]

It starts!

Yay!

 

[Biga]

Has anyone tried to adjust the rear exhuast tips on a 2025? My drivers side is lower then the passenger side and I would like to move it up. I tried loosening the clamp behind the exhaust tip but it won't budge it's almost like it's welded.

 

[Ramboy13]

Has anyone tried to adjust the rear exhuast tips on a 2025? My drivers side is lower then the passenger side and I would like to move it up. I tried loosening the clamp behind the exhaust tip but it won't budge it's almost like it's welded.

I haven’t noticed a level difference, but I’ll look. I did notice that after only 600 miles there a plenty of surface rust on them. Disappointing.

 

[Biga]

I haven’t noticed a level difference, but I’ll look. I did notice that after only 600 miles there a plenty of surface rust on them. Disappointing.

I have not noticed any rust on my yet but they do get sooty much faster then the Hemi.

 

[2025 rebel junk]

Has anyone tried to adjust the rear exhuast tips on a 2025? My drivers side is lower then the passenger side and I would like to move it up. I tried loosening the clamp behind the exhaust tip but it won't budge it's almost like it's welded.

lol me too haha . Yes they adjust its a swivel clamp so easy to do i will do mine next oil change.You can put them in any position once you losen clamp.

 

[firemedic10584]

Has anyone tried to adjust the rear exhuast tips on a 2025? My drivers side is lower then the passenger side and I would like to move it up. I tried loosening the clamp behind the exhaust tip but it won't budge it's almost like it's welded.

ya, they're super easy to adjust. It's a 13mm socket to loosen the nut/clamp. I moved mine up so they're closer to the bumper. They were way too low.

 

[Biga]

ya, they're super easy to adjust. It's a 13mm socket to loosen the nut/clamp. I moved mine up so they're closer to the bumper. They were way too low.

Okay I will try again this weekend, probably just need to put a little more force into it to break it loose.

 

[RamTruckMan]

ya, they're super easy to adjust. It's a 13mm socket to loosen the nut/clamp. I moved mine up so they're closer to the bumper. They were way too low.

What did you consider “way too low?” Where are they now? Pics? Thanks

 

[RamTruckMan]

Has anyone discovered a fix for the headlights not coming on with key fob press?
My dealer wants to open a STAR case.

 

[firemedic10584]

Has anyone discovered a fix for the headlights not coming on with key fob press?
My dealer wants to open a STAR case.

Nope - my dealer looked at it and said it was functioning as normal lol. My truck will not turn them on after the truck has been sitting off for 10 minutes or longer it seems. If I turn the truck off, then immediately get out and hit the unlock button, the approach lights seem to work. But then they don't after it's been off and locked for a bit. Which defeats the whole purpose.

 

[RamTruckMan]

Nope - my dealer looked at it and said it was functioning as normal lol. My truck will not turn them on after the truck has been sitting off for 10 minutes or longer it seems. If I turn the truck off, then immediately get out and hit the unlock button, the approach lights seem to work. But then they don't after it's been off and locked for a bit. Which defeats the whole purpose.

Yeah, my dealer did a recalibration that didn’t help. I’ve gotta schedule the Star investigation.

 

[firemedic10584]

What did you consider “way too low?” Where are they now? Pics? Thanks

There was just too much of a gap between the tip and the bumper cutout. I like them to be closer to the bumper, but it's just personal preference really. Some dudes like them aiming down at the ground lol

 

[firemedic10584]

Yeah, mine did a recalibration that didn’t help. I’ve gotta schedule the Star investigation.

Give us an update if they find anything out. I'd like mine to work all the time as well.

 

[RamTruckMan]

Give us an update if they find anything out. I'd like mine to work all the time as well.

Of course! Oh, they did say that there were no software updates for my radio, so I must be on the latest version. I guess there’s still a chance Stellantis knows about it and it will get fixed without this process.

 

[RebellionisDuty]

Got a weird feedback survey about my new Ram. Seemed to be very interested in opinions on power plants. Real EV intensive. For me it was easy. I'll take an i6 or hemi. You can keep your EV and hybrid in the showroom. Even had a question if I preferred an engine that sounded powerful, or one that felt powerful. Had a bit of feeling someone had been reading this forum.

Now I'm waiting for all my bank accounts to empty because it was phishing.