2019+ Rams with Lifts/Levels, and/or aftermarket wheel tire setups

[Rampat]

View attachment 48106

PorBoy that is the best version of your truck yet! Please don’t change the wheels or lift again.....but we know you will

 

[kj92648]

Fwiw, the single thing that affected the ride was not the lift or the ORP springs, it was the tires. I had the lift with the ORP for a couple of days before wheels and tires. Not necessarily a bad thing but tires made the ride a bit more stuff, and 'bouncy' but I let the psi down to 34/35 instead of the 40 from the tire place and it is now not noticeable to me, with exception the gas mileage.

 

[Clyde]

Fwiw, the single thing that affected the ride was not the lift or the ORP springs, it was the tires. I had the lift with the ORP for a couple of days before wheels and tires. Not necessarily a bad thing but tires made the ride a bit more stuff, and 'bouncy' but I let the psi down to 34/35 instead of the 40 from the tire place and it is now not noticeable to me, with exception the gas mileage.

Does your truck have any rake now? Any chance you can post the measurements from center of hub to bottom of wheel well?

I’m considering adding the ORP springs but don’t want to eliminate all the rake as I often haul about 500lbs of tools in the bed + I have a shell/topper.

Are you running both the spacers with the ORP springs?

 

[Kevin O'Leary]

2 inch Readylift Level
20x10 -18 Fuel Rebel
305/55r20 Falken Wildpeak AT3

Chrome sidesteps/badges are going to have to go...

View attachment 47499

How much poke do you have outside the fenders with that offset?

 

[PorBoy]

PorBoy that is the best version of your truck yet! Please don’t change the wheels or lift again.....but we know you will

It’s staying as I want to grab a 3500 but I won’t as long as I’m dumping money into this lol.

 

[Lonestar21]

2020 Laramie Ecodiesel with a ReadyLIFT 3.5 kit View attachment 47799 View attachment 47800

What’s your tires size and wheel offset?

 

[TonyTheTruckGuy]

I think you made the right call. I’m running 285/65/20 on stock Laramie wheels with level and thinking of going with aftermarket wheels but afraid I’ll be running in to offset/rubbing issues.

Do you rub at all right now? I’m stock suspension and my 275/60R20 Duratracs rub the inner splash guard near the strut tower if I’m full lock in reverse. Typically it’s only when the truck is flexing a bit like backing into the driveway but I’m going to be putting a 1.5” level on and was also considering the 285/65R20 on my stock wheel.

 

[kj92648]

Does your truck have any rake now? Any chance you can post the measurements from center of hub to bottom of wheel well?

I’m considering adding the ORP springs but don’t want to eliminate all the rake as I often haul about 500lbs of tools in the bed + I have a shell/topper.

Are you running both the spacers with the ORP springs?

It has about an inch of rake, measured as "My from hub center to fender looks like 24 1/4 and the rear at 25 1/2." I would give or take 1/4" as I was not perfect in measuring. I have full bed rug and hard tri fold outback.

Both spacers with the ORP springs.

 

[Clyde]

It has about an inch of rake, measured as "My from hub center to fender looks like 24 1/4 and the rear at 25 1/2." I would give or take 1/4" as I was not perfect in measuring. I have full bed rug and hard tri fold outback.

Both spacers with the ORP springs.

Awesome, Thanks... given that info I think I’m ready to pull the trigger on the ORP springs.

Your truck looks great BTW.

 

[Pyleketerson]

Do you rub at all right now? I’m stock suspension and my 275/60R20 Duratracs rub the inner splash guard near the strut tower if I’m full lock in reverse. Typically it’s only when the truck is flexing a bit like backing into the driveway but I’m going to be putting a 1.5” level on and was also considering the 285/65R20 on my stock wheel.

I don’t have any rubbing issues.

 

[TonyTheTruckGuy]

I don’t have any rubbing issues.

I don’t have any rubbing issues.

Awesome! I’m actually going for the BFG as well. Just gotta see how it turns out with OEM mud flaps Thanks for the reply.

 

[Ram1992]

Awesome, Thanks... given that info I think I’m ready to pull the trigger on the ORP springs.

Your truck looks great BTW.

Im scheduled to have that exact set up installed on Thursday. I had a heck of a time locating ORP springs. I placed two orders online and was told they didn’t have them in stock. I would recommend calling to check inventory prior to order the parts. Apparently there is a shortage on ORP springs.

 

[Alxmlr789]

Im scheduled to have that exact set up installed on Thursday. I had a heck of a time locating ORP springs. I placed two orders online and was told they didn’t have them in stock. I would recommend calling to check inventory prior to order the parts. Apparently there is a shortage on ORP springs.

i just ordered a set on eBay for 90 bucks delivered yesterday from Dallas CJDR - no issues here. Usually EBay orders have to be in stock.

 

[Ram1992]

i just ordered a set on eBay for 90 bucks delivered yesterday from Dallas CJDR - no issues here. Usually EBay orders have to be in stock.

What part number did you order?

 

[Alxmlr789]

What part number did you order?

Genuine Mopar Front Coil Spring 68320249AB
New OEM Factory Part

 

[TonyTheTruckGuy]

Stock suspension no off-road package or north edition. 4x4 with stock 20x9 wheels and 275/60R20 Goodyear Wrangler Duratrac. Going to be adding a 1.5” or 2” level soon and probably bigger tires after that. Only rubbing is at full lock in reverse on the inner splash guard (see picture).

 

[Deluxe]

How much poke do you have outside the fenders with that offset?

Here is a side shot. I was worried it would be too much, but really wanted the 10" wheel to get the more concave face on the rebels. Very happy with how it turned out.

 

[Ortiz7983]

Just got finished with a level and new tires. 2.5" front 2.0" rear moto fab level. 35" Ironman tires on my stock 22's. Extremely minor rub in reverse at full lock in one direction. Very easy to trim if I decide to. Could not be happier with the setup. Thanks to all on this forum for your experiences and advice. View attachment 33114

Got anymore pictures?

 

[Ortiz7983]

ORG, Ready Lift UCAs, 2.5” Motofab spacers in front, 1” spacer in back, 35x12.5R20 Ironman All Country M/T, Fuel Warrior 20x10 -18 offset View attachment 32621

Do you think stock 22 inch wheels with 35s will run with your set up?

 

[Alxmlr789]

Mopar 2” (updated) with 35x12.5x20 on a 20x9 et 1 fuel rebel.

I’ve got ORP springs in my shop, I’ll probably get around to install them this week or next at some point.