5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
2019 RAM 1500 hellwig swaybar
- Thread starter Mikhail19Laramie
- Start date
U
User_34235
Guest
I read a lot of the 30+ pages on here and it seems like this is a mod you can do in your garage without a lift. Correct me if I am wrong. Thanks.
HemiDude
Spends too much time on here
You are correct. You actually want the tires supporting the truck when you tighten everything up anyway, so if you can slide under the truck to do the job you're in good shape
U
User_34235
Guest
Hemidude... thanks a lot. Looks like another item I will be buying. Reading a lot of this thread it sounds like a good return on invest opportunity.
Thanks again.
Thanks again.
I purchased mine from Nick @GotExhaust. Nick is a stand up guy with great deals and a solid reputation for customer service. I ordered it Tuesday night and it arrived today (Friday) around noon. Perfect transaction with lightening fast shipping! Highly recommended as I’ve purchased catch cans and this Helwig sway bar from him.
Last edited:
I installed mine this afternoon. It was a simple 30 minute job swapping out the factory unit and the results were phenomenal. I’ve driven Rams going back to the 80’s and always felt they were great driving/riding trucks but this Hellwig sway bar adds a whole new dimension to the experience. My wife had no idea I ordered and installed it. I took her to Target and she asked what I did so it doesn’t feel like a boat in the turns. Highly recommended!!
z0n3
Ram Guru
- Joined
- Jun 16, 2019
- Messages
- 1,722
- Reaction score
- 1,372
- Points
- 113
- Age
- 32
Hellwig quickly became one of my favorite upgrades after I installed it.
shrubs2000
Active Member
Finally installed mine today during lunch. Total time was 45 min. It took longer than expected as the end links were a BEAR to get off. My 8mm ratchet wrench couldn't take the pressure but I was lucky my one and only 1/4 drive socket was strong enough. The picture was taken with the Truck in OR2 so I could get under it easier.
All bolts are tightened to GAT specifications. GAT - Good And Tight! Will verify the specs again after a few hundred miles or so.
All bolts are tightened to GAT specifications. GAT - Good And Tight! Will verify the specs again after a few hundred miles or so.
Attachments
Scram1500
Spends too much time on here
- Joined
- Jan 15, 2020
- Messages
- 3,277
- Reaction score
- 6,897
- Points
- 113
- Age
- 49
Maybe because it's in OR2 and the camera angle, but the sway bar looks dangerously close to the diff cover. Does the dip in the bar point down when the truck is level?
U
User_34235
Guest
It looks like it might be installed upside down? But it could be the angle.
shrubs2000
Active Member
Dang it... it may be upside down. I pulled the old one out and "thought" I lined the new correct. This pic is at the normal ride setting.
Attachments
Jeffjad
Ram Guru
Appears to be upside down
.
U
User_34235
Guest
I would have to agree that it looks upside down
ny2az
Well-Known Member
normal ride height ... definitely in wrong ...
U
User_34235
Guest
The U-shaped in the middle of the bar should be pointing down to a small extent
shrubs2000
Active Member
I have to actually go into the office tomorrow so will switch it tomorrow after work or Friday. The good news is the end links will be easier this time around.
Neurobit
RAM Sorcerer
No disagreement from me here.
