Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I have been running the Nitto 295/55R20 Ridge Grapplers on stock rims on my truck since new. I love them! Still very quiet with 33k miles on them and tread is holding up nicely. Are they as quiet as stock? No, but I love the look and traction and wear. They are a little heavy, but I’m not a lead...
After listening to the sound in the video, I can confirm this matches my case mentioned above where the added seal up the front top edge of the door beside the A-frame dramatically reduced the occurrences for me. I only have it at high speed against a crazy strong headwind now.
I did this on...
I had the whistle-type noise at high speeds and especially into headwinds. I ultimately figured out that it was the seal between the door and the truck down the A-Frame next to the windshield. I bought a cheap roll of automotive rubber weatherstripping from Home Depot and ran it down both doors...
I went this route and a great many others have followed. Enjoy my friend.
https://5thgenrams.com/community/threads/rear-under-seat-storage-aftermarket-options.2556/post-75903
I had problems with my backup cameras on both of my 2019 Rams...but after they were replaced, thankfully, no issues with them whatsoever.
I love my truck and my son loves his.
I’m hopeful that yours is one and done also. Good luck friend!
I love my Bakflip MX4 cover. I called them (2 years ago now) and asked them if they could provide a discount as this was my 3rd time buying their products and I love them. They gave me 20% off for both of my 2019 Rams. :)
While they are not XL, I am running the Nitto Ridge grapplers and LOVE them. I have 16k miles on them and they are very quiet and comfortable for me and my family. They ride slightly rougher than stock, but all AT tires will. I would buy these again and again.
LT295/55R20 E 123/120Q
They have a...
I went the simple route and I’m extremely happy with the outcome. Links below provide my install deets:
https://5thgenrams.com/community/threads/bed-lighting-kit.2173/post-78117
https://5thgenrams.com/community/threads/bed-lighting-kit.2173/post-83857
I did the same as referenced in the post linked below. Super simple. Took about 30 minutes and I love having control of the bed lights while I’m at the bed.
https://5thgenrams.com/community/threads/bed-lighting-kit.2173/post-78117
I had the AFE CAI on mine for a while, but sold it. No real difference in response or mileage, but made the truck louder (which the wife didn’t appreciate). Pulled my carbon filter + dropped in the KN aftermarket and could not be happier. ;)
I have my setup in my signature, but I have the 2” ReadyLift level with upper control arms - Nitto Ridge Grappler 295/55/r20 tires.
I love the look, feel, drive, lack of road noise, etc. perfect for me. :)
Here is a link to another post that shows the spacers and how the stock lugs project.
https://5thgenrams.com/community/attachments/20190510_175435-jpg.24677/
Attaching pics of my setup with 1” spacers.
The stock wheels have an indentation in the back that allowed me to use the spacers with no lug trimming. I think as long as you go with 1” or greater, there should be no issue.
If you are using after-market wheels, you will want to confirm that there is an indent that will allow the existing...
I bought the 1” spacers at the site below (used the same front and back). They fit perfectly and are very good quality. Strongly recommend them.
http://www.motorsport-tech.com/bora.html
As I understand it, the 3.5” lift with upper control arms would be perfectly fine in non-ORP trucks. I’ve been thinking of going to this eventually. The CV joints are seemingly holding up fine for others in the forum, which gives me confidence. :)
I installed mine in winter after keeping it in a temp controlled space for a couple of days. In truth, there are still a few small bumps, but not enough to bother me. The velcro placement took most of them out. ;)
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.