Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Try purchasing the PAC ANC bypass harness first you will not have to disconnect the mics and can tap into this instead of tapping your factory wires. This is what I used on my 1500 to grab signal, power and ground for my LC7i...
So coming from someone that has Skar audio in their ram1500 and loves it. The tx3.5 fit without modifications in the stock locations. The tx69 need a half inch spacer for the front doors in order for the window not to hit. However this is common with most speakers that have a decent magnet...
Ok so for future proofing I’ll give you three options:
Best: DSR1 this will give you all outputs needed plus had a built in DSP
Better: AMP pro give a clean signal to your amplifier even with volume turned all the way up
Cheapest: LC7i works great if you don’t mind messing with settings...
Only way to find out is if you enable it using alfaobd. Some would say it works.
However, I my icon never showed up after enabling the the cargo camera on my 2019 8.4 non nav.
Anybody having issues after adding an H8 AGM battery? Only ask because my truck voltage now fluctuates from 14.3-13.5 while idle. This only started to occur once I replaced the OEM battery with and H8 AGM. I have tried resetting the truck with no luck. Also had the battery tested and...
I am currently running the 2.5” motofab leveling top hat spacers and the mopar 2” lift kit upper control arms. Best setup if you don’t do any off-roading and don’t want to break the back all together I spent roughly $200 for UCAs and Spacer. Installed the kit myself at home in around 2.5...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.