5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

What did you do to your Ram today???

Steele713

Active Member
Joined
Jul 27, 2022
Messages
88
Reaction score
96
Thinking of trading my Longhorn in, but this is depressing.
View attachment 170041
What are your miles? That doesn't seem to bad, probably another 2k trying to sell private 1st. My 2019 came in about the same on kbb, 37k private and I didn't pay much more than that when I got it over a year ago. I'm at 61k mileage
 

K_Hub

Active Member
Joined
Apr 9, 2020
Messages
151
Reaction score
259
Installed .375” front and .5” rear BORA wheel spacers and couldn’t be happier with the results.

f3d6f34c7a11157bb86164cd0877af40.jpg

489b2e9b591f400dfa23d32947d883f5.jpg



Sent from my iPhone using Tapatalk
 

JOzzz

Active Member
Joined
Mar 6, 2020
Messages
116
Reaction score
126
Those are husky mudflaps. Best ones on the market in my opinion.


Sent from my iPhone using Tapatalk

They’re very similar but half the price. https://a.co/d/8TizSTO I personally like the Weathertechs better, but wasn’t spending $150 on 4 pieces of plastic/rubber. I scored these for $22 on Amazon. They went up $4 since I bought but still a good deal at $26.


Sent from my iPhone using Tapatalk
 

K_Hub

Active Member
Joined
Apr 9, 2020
Messages
151
Reaction score
259

I lifted the front 3”, put on 295/70R18s, and installed new zone UCAs. The UCAs were a little too close for comfort to the tire for my liking especially when thinking about airing down in the future.

I like my rebel take offs so I looked for alternatives and came upon BORA. They make a high quality hub centric spacer that I feel confident in, especially after putting them on today. I counted more than 8 full turns on the lug nuts for the rear hubs with the thicker .5” spacer and torqued everything down to spec. I did the rear to match so it doesn’t look oddly more narrow than the front.

Now I don’t have to worry about airing down in the future nor the tire coming in contact with the UCA in the event of a higher speed sharp turn.


Sent from my iPhone using Tapatalk
 

1.21gigawatts

7-Stringer
Site Supporter
Joined
Dec 29, 2021
Messages
983
Reaction score
1,333
Location
Boston, MA
I’ve been real happy with the Wildpeaks on my Rebel. One of the smoothest truck tires I’ve had. At about 45,000 miles now and they still have about 40% tread left.


Sent from my iPhone using Tapatalk
Quieter than the oem Duratrash?
 

1.21gigawatts

7-Stringer
Site Supporter
Joined
Dec 29, 2021
Messages
983
Reaction score
1,333
Location
Boston, MA
Just got a recall notice in the mail:
97A/NHTSA 23V-654 Rear Camera Visibility

Somethin about the rear cam not coming on in certain conditions due to a possible camera system and radio incompatibility in “certain 2022 RAM 1500 vehicles” … then they go on to say the fix is just a software update at the dealer. And then they go on to say you can just do the update OTA later when it comes out and they’ll be no need to go to the dealer. 🤔

I’m waiting for the OTA update but I don’t think I’ve had this happen and it’s been 1.5 yrs now. Anyone else??
 

JamRam

Ram Guru
Joined
Aug 17, 2021
Messages
656
Reaction score
1,399
Just got a recall notice in the mail:
97A/NHTSA 23V-654 Rear Camera Visibility

Somethin about the rear cam not coming on in certain conditions due to a possible camera system and radio incompatibility in “certain 2022 RAM 1500 vehicles” … then they go on to say the fix is just a software update at the dealer. And then they go on to say you can just do the update OTA later when it comes out and they’ll be no need to go to the dealer. 🤔

I’m waiting for the OTA update but I don’t think I’ve had this happen and it’s been 1.5 yrs now. Anyone else??
I had that recall done earlier this year. I didn't have a problem before the callout but I figured I'd just get it done for record-keeping.

Didn't notice anything different afterwards.
 

Dogpatch

Ram Guru
Joined
Jun 13, 2020
Messages
756
Reaction score
2,002
Location
Coldstream, BC
Just got a recall notice in the mail:
97A/NHTSA 23V-654 Rear Camera Visibility

Somethin about the rear cam not coming on in certain conditions due to a possible camera system and radio incompatibility in “certain 2022 RAM 1500 vehicles” … then they go on to say the fix is just a software update at the dealer. And then they go on to say you can just do the update OTA later when it comes out and they’ll be no need to go to the dealer. 🤔

I’m waiting for the OTA update but I don’t think I’ve had this happen and it’s been 1.5 yrs now. Anyone else??
I just got the OTA Update notice a few weeks ago. I pressed okay. It happened. No issues. Never noticed anything different.
 

Idahoktm

Spends too much time on here
Joined
Apr 27, 2021
Messages
3,807
Reaction score
4,907
Location
North Idaho
Quieter than the oem Duratrash?

Yep, a lot quieter and smoother. I had a set of DuraTracs and my buddy has the Wildpeaks. The only negative for me with the Wildpeaks, is they aren't very aggressive looking. If they would beef up the sidewall lugs, I would buy a set.
 

HemiDude

Spends too much time on here
Joined
Jul 5, 2020
Messages
2,576
Reaction score
2,204
Location
Ohio
Just got a recall notice in the mail:
97A/NHTSA 23V-654 Rear Camera Visibility

Somethin about the rear cam not coming on in certain conditions due to a possible camera system and radio incompatibility in “certain 2022 RAM 1500 vehicles” … then they go on to say the fix is just a software update at the dealer. And then they go on to say you can just do the update OTA later when it comes out and they’ll be no need to go to the dealer. 🤔

I’m waiting for the OTA update but I don’t think I’ve had this happen and it’s been 1.5 yrs now. Anyone else??
Nope. And with any luck, the F-OTA-U won't screw with things that are already working fine.
 

ramButz

Ram Guru
Joined
Feb 11, 2019
Messages
1,320
Reaction score
920
Location
syracuse,ny
finally got to install the hood louvers.all was left to do was the lettering
 

Attachments

  • 20231028_132200_InPixio.jpg
    20231028_132200_InPixio.jpg
    128.8 KB · Views: 90
  • 20231028_140717 - Copy_InPixio.jpg
    20231028_140717 - Copy_InPixio.jpg
    128.9 KB · Views: 91
  • 20231028_140726_InPixio.jpg
    20231028_140726_InPixio.jpg
    127.7 KB · Views: 87
  • 20231017_204851_InPixio.jpg
    20231017_204851_InPixio.jpg
    124.9 KB · Views: 78

Users who are viewing this thread

Top