What did you do to your Ram today???

[Threesuns1]

Thanks. I saw that, but looking for something permanent. Sometimes we take the tent and sometimes the trailer. None of the hitch mount options I've seen will work and keep the receiver usable.

https://www.amazon.com/EBESTauto-Brackets-Trailer-Off-road-Driving/dp/B07WD1N9CW/ref=sr_1_1_sspa?crid=1UJEW3ZSDMDCL&keywords=hitch+lights+for+trucks&qid=1676480480&sprefix=hitch+lights%2Caps%2C79&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFTTVNQVUpYTk1ITFMmZW5jcnlwdGVkSWQ9QTAzMjk0MTgyVzJWVTRCNkpRSU02JmVuY3J5cHRlZEFkSWQ9QTAxODQ5MTExMDFIQU9XUFAzVUlFJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

 

[SkittleRam]

5.3 mpg?

the* my hands type faster than my brain

 

[Lpsouth1978]

I used these with pod lights and they work great. They just hook onto the hitch tube without interfering with towing or camping in anyway.

 

[Belvedere]

I used these with pod lights and they work great. They just hook onto the hitch tube without interfering with towing or camping in anyway.

View attachment 151814

View attachment 151815

View attachment 151816

Hey, that could work. The ones that clamp to the receiver get in the way of the pin and chains. The receiver just isn't big enough.

Would you mind posting a pic showing the brackets on your truck sometime?

 

[Lpsouth1978]

Hey, that could work. The ones that clamp to the receiver get in the way of the pin and chains. The receiver just isn't big enough.

Would you mind posting a pic showing the brackets on your truck sometime?

I'm sure I could get some this afternoon when I go to lunch.

 

[jl13]

Thanks. I saw that, but looking for something permanent. Sometimes we take the tent and sometimes the trailer. None of the hitch mount options I've seen will work and keep the receiver usable.

I like this from diode dynamics but also thinking about giving this auxbeam set a chance and run the wire to the blazer controller. If its too much light maybe just one would be enough. I think there are options to drill or mount it in the bumper.

Amazon.com

 

[Belvedere]

That might be a good option too. I was kinda thinking about KC Cyclones with magnet mounts.

Magnet Mount Kit for Cyclone LED V2 Lights - 6 Pack

KC Magnet Mounts are an ultra-strong yet easy way to mount Cyclone V2 LED Lights to your rig. These easily attach to the Cyclone with the included hardware and are tough enough to hang tight during whatever adventure you can throw at them. PACKAGE CO

www.kchilites.com

 

[jl13]

I used these with pod lights and they work great. They just hook onto the hitch tube without interfering with towing or camping in anyway.

View attachment 151814

View attachment 151815

View attachment 151816

excellent share, also looking forward to the pics

 

[jl13]

That might be a good option too. I was kinda thinking about KK Cyclones with magnet mounts.

Magnet Mount Kit for Cyclone LED V2 Lights - 6 Pack

KC Magnet Mounts are an ultra-strong yet easy way to mount Cyclone V2 LED Lights to your rig. These easily attach to the Cyclone with the included hardware and are tough enough to hang tight during whatever adventure you can throw at them. PACKAGE CO

www.kchilites.com

might work too, think i have seen something like this install under the hood as well. good option there for people that work late on their engines

 

[HSKR R/T]

I like this from diode dynamics but also thinking about giving this auxbeam set a chance and run the wire to the blazer controller. If its too much light maybe just one would be enough. I think there are options to drill or mount it in the bumper.

Amazon.com

After seeing the bar mount lpsouth shared, ai started looking, and think I will try these. I like that they are blacked out when not on


: 6 Inch LED Light Bars,2pcs 60W Flood Beam 12V Small Slim Light Bar Pod Fog Light for Trucks Motorcycle Off Road ATV UTV https://a.co/d/bSjQZLd

 

[Lpsouth1978]

Those look prety slick. Wish I had seen them before doing mine. I like the 6" length of mine, but those are only about half the height and would be conceiled better.

P.S. - Pictures of the mounts under my truck should be coming in the next hour or so.

 

[BowDown]

Took my husky (shed master 9000) for a nail trim






The seat and door covers seem to work well

 

[cskindt]

I got a new windshield!

It's an original equipment equivalent made by Vitro, which also appears under the OEM glass.
There was no need to re-calibrate the LKA/FCW/ACC system either. It all worked as usual with no errors.

And, as an added bonus, I received the much-anticipated UC5 v26.17 update from v26.15!

 

[Yawnsky24]

@BowDown, would you share what seat and door protectors you have? I have a Limited coming soon (I hope) and I have an even bigger shed monster, Winni!

Thank you

 

[Lpsouth1978]

Hey, that could work. The ones that clamp to the receiver get in the way of the pin and chains. The receiver just isn't big enough.

Would you mind posting a pic showing the brackets on your truck sometime?

Here are a few pics. They are not the best, but couldn't really lay under the truck in my scrubs during lunch.

 

[JamRam]

I got a new windshield!

It's an original equipment equivalent made by Vitro, which also appears under the OEM glass.
There was no need to re-calibrate the LKA/FCW/ACC system either. It all worked as usual with no errors.

And, as an added bonus, I received the much-anticipated UC5 v26.17 update from v26.15!


View attachment 151865

View attachment 151866

View attachment 151867

When does the new ring get delivered?

 

[BowDown]

@BowDown, would you share what seat and door protectors you have? I have a Limited coming soon (I hope) and I have an even bigger shed monster, Winni!

Thank you View attachment 151870

https://www.amazon.com/dp/B071XP55XK?psc=1&ref=ppx_yo2ov_dt_b_product_details

https://www.amazon.com/dp/B06W597YC7?psc=1&ref=ppx_yo2ov_dt_b_product_details

I believe these are some recommended here by others, the seat protector is nice and thick so her nails dont go through it

 

[Belvedere]

Here are a few pics. They are not the best, but couldn't really lay under the truck in my scrubs during lunch.

View attachment 151871 View attachment 151872 View attachment 151873 View attachment 151874

Thanks!

I think I need those brackets. They fit great there. Did you tap into a plug and play trailer harness?

 

[D-dub]

Is there a link for that on this site somewhere? Thanks

It's in the owners manual. Somewhere on this forum a member posted it as well.

 

[lpartridge]

@BowDown, would you share what seat and door protectors you have? I have a Limited coming soon (I hope) and I have an even bigger shed monster, Winni!

Thank you View attachment 151870

Amazon.com

This is a little expensive, but it works with the seats up and gives the pet more room, and it handles my white Lab really well.