5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
What did you do to your Ram today???
- Thread starter 19BlkRam
- Start date
- Joined
- Jul 25, 2020
- Messages
- 9,853
- Reaction score
- 9,663
This a pre-emptive install, or an had yours broken already? I rarely use my sunvisors since I have tinted windshield and wear sunglasses.
31RamIt
Ram Guru
- Joined
- Oct 25, 2021
- Messages
- 1,102
- Reaction score
- 1,087
Getting rub on my front tires with the husky mud guards. Probably going to take them off.Flipped it around the right way now. Put Rokblokx mudflaps on the rear. The front ones rub the tires so they were removed. Moved the Bilstein 6112’s from the 6th to the 8th Circlip for additional lift. Picked up the appropriate ORP springs to go on with the Bilstein 5100’s for the rear. View attachment 147674View attachment 147677
Reldn
Active Member
- Joined
- Apr 7, 2022
- Messages
- 50
- Reaction score
- 121
Pre-emptive. I don't often use my visors either, but, my Wife uses them a lot. So, I figured I'd go ahead and do a little preventative maintenance.
Steele713
Active Member
- Joined
- Jul 27, 2022
- Messages
- 84
- Reaction score
- 95
Yes Sir. 285/75
Steele713
Active Member
- Joined
- Jul 27, 2022
- Messages
- 84
- Reaction score
- 95
What are the appropriate ORP springs to go with the rear bilstein 5100s? I want to do same as I have the adjustable 5100s up front but lost all my rake. So figure a lift in the rear will be right where I want er. TksFlipped it around the right way now. Put Rokblokx mudflaps on the rear. The front ones rub the tires so they were removed. Moved the Bilstein 6112’s from the 6th to the 8th Circlip for additional lift. Picked up the appropriate ORP springs to go on with the Bilstein 5100’s for the rear. View attachment 147674View attachment 147677
You'll find your answer here:
Orp spring part #s
I installed the ORP front springs on a non ORP truck along with the Bilstein 5100’s on setting #3. I was looking for about 2” of total lift in the front (1” from ORP springs and 1” from Bilsteins) but netted closer to 2.5”. So I’m now sitting basically dead even front and rear at 38 1/2” on...
5thgenrams.com
or here:
ORP Springs + Leveling Kit on 2019 Ram 1500
So I've been reading the forums alot on the ORP vs Non ORP rams. So i decided to create this thread to cover my trials with it. I want to lift my truck to aroun the 3-3.5" Range ( was looking at the Ready lift and Rough country) However i've never been a fan of preload spacers. And enough...
5thgenrams.com
Or you can also install Icon rear coils for another 0.5" of lift over the Bilsteins. I did that and gained 2" with the rear 5100s.
Here's mine with 5100s all around, clip 5, front ORP and rear Icons. I might drop down to clip 4 when I get my new wheels/tires installed.
Level and larger tires
Hey guys, I’m piecing together a level and tire upgrade and I’m wondering if I’m missing anything. Any input would be great. 2021 Laramie Sport non ORG no air. - Swapping to big horn night edition wheels with 295/60R-20 Falken Wildpeaks. 34” tall. - ORG springs for all 4 corners. - Mopar...
5thgenrams.com
1500 Icon 1.5 rear spring
Looking for some feedback on the Icon 1.5 Rear spring. More just looking for measurements. Center hub to fender lip mainly.
5thgenrams.com
Last edited:
moosem
Ram Guru
Last edited:
tabber02
Well-Known Member
nice, and glad to hear. i’m slapping the 35s on next week. though just 3.21 gears
we’ll see… i can’t wait! 
my bad. out fishing again today. it was 82, a dinkfest, and i have sunburnt feet 
31RamIt
Ram Guru
- Joined
- Oct 25, 2021
- Messages
- 1,102
- Reaction score
- 1,087
I'm really pondering a bedrug
Rock Crawler
Ram Guru
I have the bedrug with the impact liner and really like it. The install was a little work because I have the bed rail system and had to make the holes for the mounting bolts, but it turned out great.
Thanx
moosem
Ram Guru
I had a BedRug Impact Liner in my 19 BigHorn and really liked it.
At the time when I got it (back in 2018) there were very few options for bed liners for 5th gens, so I gave it a try out of necessity.
My new truck has the factory spray in liner, which is nice but tough on the knees. Plus, cargo slides all over the place.
I knew I wanted a bed mat, and I like the BedRug because it’s very good quality and it has a ‘tailgate gap guard’ which prevents debris from getting down into the gap between the bed and tailgate. Plus it looks really good.
ferraiolo1
Spends too much time on here
I’ve had a few bedtreds from
Bedrug. It’s a great alternative depending on how you use your truck. My last ones were the entire liner. For my ram I just got the bottom portion.
Sent from my iPhone using Tapatalk
Dogpatch
Ram Guru
Sorry for your loss. Our pets bring so much enjoyment to our lives.Lost my sidekick last Wednesday
John on Instagram: "#yorkie #yorkshireterrier #heartbroken"
7 likes, 2 comments - luvgun69December 30, 2022 on : "#yorkie #yorkshireterrier #heartbroken"www.instagram.com
View attachment 147644
That’ll leave a big hole.
I like mine. So far they've been pretty good.
It went really smooth. Only took a few hours to do
Socal Night Edition
Member
I have been wanting to do this but was wondering if it would work with those rails that I also have. Now you have inspired me to do this. Any tips on making those holes In the carpet?
Dang your truck looks amazing!
Didn’t physically do anything today but I did photoshop some desert style bumpers & 38” Toyos on 18” KMCs. The wheels & tires are something I plan on pulling the trigger on in the future because they’ll fit with my lift, but still undecided on the bumpers! Oh and the side exit exhaust lol. Only time will tell but I like making these visuals.
but I like making these visuals.
