What did you do to your Ram today???

[Reldn]

Installed the Taccom visor clips today.

 

[HSKR R/T]

Installed the Taccom visor clips today.
View attachment 147680
View attachment 147681

This a pre-emptive install, or an had yours broken already? I rarely use my sunvisors since I have tinted windshield and wear sunglasses.

 

[31RamIt]

Flipped it around the right way now. Put Rokblokx mudflaps on the rear. The front ones rub the tires so they were removed. Moved the Bilstein 6112’s from the 6th to the 8th Circlip for additional lift. Picked up the appropriate ORP springs to go on with the Bilstein 5100’s for the rear. View attachment 147674

View attachment 147677

Getting rub on my front tires with the husky mud guards. Probably going to take them off.

 

[Reldn]

This a pre-emptive install, or an had yours broken already? I rarely use my sunvisors since I have tinted windshield and wear sunglasses.

Pre-emptive. I don't often use my visors either, but, my Wife uses them a lot. So, I figured I'd go ahead and do a little preventative maintenance.

 

[Steele713]

Typo? 285/75 maybe?

Yes Sir. 285/75

 

[Steele713]

Flipped it around the right way now. Put Rokblokx mudflaps on the rear. The front ones rub the tires so they were removed. Moved the Bilstein 6112’s from the 6th to the 8th Circlip for additional lift. Picked up the appropriate ORP springs to go on with the Bilstein 5100’s for the rear. View attachment 147674

View attachment 147677

What are the appropriate ORP springs to go with the rear bilstein 5100s? I want to do same as I have the adjustable 5100s up front but lost all my rake. So figure a lift in the rear will be right where I want er. Tks

 

[cskindt]

What are the appropriate ORP springs to go with the rear bilstein 5100s? I want to do same as I have the adjustable 5100s up front but lost all my rake. So figure a lift in the rear will be right where I want er. Tks

You'll find your answer here:

Orp spring part #s

I installed the ORP front springs on a non ORP truck along with the Bilstein 5100’s on setting #3. I was looking for about 2” of total lift in the front (1” from ORP springs and 1” from Bilsteins) but netted closer to 2.5”. So I’m now sitting basically dead even front and rear at 38 1/2” on...

5thgenrams.com

or here:

ORP Springs + Leveling Kit on 2019 Ram 1500

So I've been reading the forums alot on the ORP vs Non ORP rams. So i decided to create this thread to cover my trials with it. I want to lift my truck to aroun the 3-3.5" Range ( was looking at the Ready lift and Rough country) However i've never been a fan of preload spacers. And enough...

5thgenrams.com

Or you can also install Icon rear coils for another 0.5" of lift over the Bilsteins. I did that and gained 2" with the rear 5100s.

Here's mine with 5100s all around, clip 5, front ORP and rear Icons. I might drop down to clip 4 when I get my new wheels/tires installed.

Level and larger tires

Hey guys, I’m piecing together a level and tire upgrade and I’m wondering if I’m missing anything. Any input would be great. 2021 Laramie Sport non ORG no air. - Swapping to big horn night edition wheels with 295/60R-20 Falken Wildpeaks. 34” tall. - ORG springs for all 4 corners. - Mopar...

5thgenrams.com

1500 Icon 1.5 rear spring

Looking for some feedback on the Icon 1.5 Rear spring. More just looking for measurements. Center hub to fender lip mainly.

5thgenrams.com

 

[moosem]

Side steps are done, black tips installed.

I did tell a little white lie in my previous post. I’m actually not totally done. I have an appointment next week to get PPF on the front bumper, and the front windows tinted.

He is also going to try and tint the taillights to mimic night edition tails.

Then I’m done… for now.


View attachment 147391View attachment 147392

I ended up Plasti Dipping the hood emblems..

Also installed the BedRug Impact Bed Mat.

 

[tabber02]

Still rides good. Rode great with just bilsteins and factory wheels. Once went with the 10ply grapplers at 40psi age got a tad more firm, but still to me rides really good, after all it is a big Ram beast with 35s...handles better and more level turns with wider stance and bilsteins. Slight calm hum from tires, but very light and a big surprise wasn't more than just a very low hum. Very pleased with the look and performance. Now to see what mpg does. 3.92 years turn these 35s just fine and doesn't feel like a struggle to get er moving. Etorque equipt too.

nice, and glad to hear. i’m slapping the 35s on next week. though just 3.21 gears we’ll see… i can’t wait!

I'm in central WA, and we hate you.

my bad. out fishing again today. it was 82, a dinkfest, and i have sunburnt feet

 

[31RamIt]

I ended up Plasti Dipping the hood emblems..

Also installed the BedRug Impact Bed Mat.

View attachment 147692



View attachment 147693View attachment 147696

I'm really pondering a bedrug

 

[Rock Crawler]

I'm really pondering a bedrug

I have the bedrug with the impact liner and really like it. The install was a little work because I have the bed rail system and had to make the holes for the mounting bolts, but it turned out great.

 

[montez25]

Nice set up you running

Thanx

 

[moosem]

I'm really pondering a bedrug

I had a BedRug Impact Liner in my 19 BigHorn and really liked it.

At the time when I got it (back in 2018) there were very few options for bed liners for 5th gens, so I gave it a try out of necessity.

My new truck has the factory spray in liner, which is nice but tough on the knees. Plus, cargo slides all over the place.

I knew I wanted a bed mat, and I like the BedRug because it’s very good quality and it has a ‘tailgate gap guard’ which prevents debris from getting down into the gap between the bed and tailgate. Plus it looks really good.

 

[ferraiolo1]

I'm really pondering a bedrug

I’ve had a few bedtreds from
Bedrug. It’s a great alternative depending on how you use your truck. My last ones were the entire liner. For my ram I just got the bottom portion.


Sent from my iPhone using Tapatalk

 

[Dogpatch]

Lost my sidekick last Wednesday

@luvgun69 on Instagram: "#yorkie #yorkshireterrier #heartbroken"

7 likes, 2 comments - luvgun69 on December 30, 2022: "#yorkie #yorkshireterrier #heartbroken".

www.instagram.com

View attachment 147644

Sorry for your loss. Our pets bring so much enjoyment to our lives.
That’ll leave a big hole.

 

[KopterDok]

Random, but someone made fun of my venom power tires.. so far they've been great.

I like mine. So far they've been pretty good.

 

[KopterDok]

how was the install?

It went really smooth. Only took a few hours to do

 

[Socal Night Edition]

I have the bedrug with the impact liner and really like it. The install was a little work because I have the bed rail system and had to make the holes for the mounting bolts, but it turned out great.

View attachment 147702

I have been wanting to do this but was wondering if it would work with those rails that I also have. Now you have inspired me to do this. Any tips on making those holes In the carpet?

 

[SKT Customs]

Nothing big, just washed it. View attachment 147436

Dang your truck looks amazing!

 

[SKT Customs]

Didn’t physically do anything today but I did photoshop some desert style bumpers & 38” Toyos on 18” KMCs. The wheels & tires are something I plan on pulling the trigger on in the future because they’ll fit with my lift, but still undecided on the bumpers! Oh and the side exit exhaust lol. Only time will tell but I like making these visuals.