Changed my Hellwig Sway Bar to the middle setting from the tightest. Wasn't too bad, but seemed just a tad too much on the tightest setting. Middle setting definitely seems to be the sweet spot, as most other posters have similarly commented.
Also installed some additional bed lighting and a new switch. Already had installed LEDs behind the BUG rails and wired them to the OEM switch. Decided the side lighting behind BUG wasn't quite enough and added some down lighting under the bed side tops. Also installed an additional switch still wired to the OEM lighting tap. So, now I can either have just the OEM bed lighting or both the OEM lighting and my additional LEDs, all still working off the OEM lighting setup including automatic activation/shutdown, or switched activation. Pics show the before and after installing the additional down lighting, both with and without the bed cover closed, and the new switch installed.