What did you do to your Ram today???

[barakutha]

Swapped my chrome Mopar deflector for the black.. instead of going black on the grill, I think I'm gonna paint match

Sent from my iPhone using Tapatalk

2019 Limited 4x4 with ramboxes, no etourque
- Borla cat-back touring with resonator
- 20% ceramic tint all around and pano
- Leveled with Daystar spacers and revel links (0.5in rake)
- Nitto ridge grapplers 285/55r22 (34.6x11.7)

 

[WasatchBack]

Lots of family on the island, but I’m military.

Thank you for your service!!

 

[rsmeanie]

I need to install an accessory switch on my dash and I have no desire to drill into the leather part of the dash so that limits my options. I found the perfect spot next to the e-brake switch. It works perfectly.

 

[OC.13]

Installed my Dualliner bed liner today. Twenty minutes . Love the concept. See how it holds up.

 

[sjsleuth]

I put in the Flowmaster flow fx muffler. Easy install, 1/2 hour start to finish including getting the tools needed out and putting away. I was also working on the ground.

The sound is amazing, deep and mellow with ZERO drone at all. While cursing down the road, you can barely tell anything was done to the truck.

Anyone thinking of doing this, do it. Its not as loud as you'd think so if you want loud, look at something different but if you want a deep rumble this is the way to go!

I literally spent 2 weeks listening to every exhaust sound clip I could find, and from reviews on here this seemed to be what I wanted.

IMO depends on what your doing with your truck....I have had the bed rug in ones before that covers sides and bed with tailgate covered as well. Liked it very well. I now have the the bed rug that lays in bed of truck and is Velcro in,I also bought the tail gate cover by bed rug as well. I never really haul any thing that needs to cover the sides....but if you haul things that hit the sides on a regular basis I would get total cover. Personally I don't care for plastic bed lines but each to their own.

Bed rug not being made for Rambox.

 

[roshang98]

I also installed my S&B Filter Sock. For anyone looking for one, the P/N is WF-1063 (Filter Wrap for KF-1069 Filter)

View attachment 33590

How is your S&B working for you? I am planning to install in next week? Any pros or cons?


Sent from my iPhone using Tapatalk

 

[Pritch]

I need to install an accessory switch on my dash and I have no desire to drill into the leather part of the dash so that limits my options. I found the perfect spot next to the e-brake switch. It works perfectly.

View attachment 36153

View attachment 36152

View attachment 36151

View attachment 36150

Missile launcher?

 

[Rebel 12]

I painted my 1/27 scale Rebel the same as my full size. Only White and Red wasn't acceptable.

 

[Amazing93]

Ordered a Borla catback s-type exhaust.

 

[Cross88]

I debadged the trim level from the tailgate and sprayed the big ram emblem black. Plastidip, not my preferred method but I had it laying around and figured it’s good enough for now.

 

[MQQSE]

Installed my Diamondback SE and cab guard and also WeatherTech mud flaps. Install took about an hour and very pleased with the results.
View attachment 36069View attachment 36070View attachment 36071

Looks great, very clean...but need to remove the dealer decal on the tailgate (says
Griffin' or something like that). It becomes the focal point because it's odd looking. Nice ride.

 

[Bufo]

Installed my Dualliner bed liner today. Twenty minutes . Love the concept. See how it holds up.

I was just looking at getting one. It looks good in my opinion! Seems more cost efficient than a spray in and I like the idea of a rubber non slip mat.

 

[rrbhokies]

Installed my Dualliner bed liner today. Twenty minutes . Love the concept. See how it holds up.

Does everything snap into place, or do you need to use double sided tape anywhere? Also, what about the tailgate? Is that bolted down or with double-sided tape?

 

[Scott_65]

Looks great, very clean...but need to remove the dealer decal on the tailgate (says
Griffin' or something like that). It becomes the focal point because it's odd looking. Nice ride.

Thanks, yeah the sticker needs to go.

 

[A71Rambler]

It has been a busy few weeks since I bought my Ram....

1. Had the front windows tinted to match.
2. Changed out all the emblems from chome to black - RAM on grille, doors, tailgate and sport hood
3. Tazer DT
4. Mopar bed divider
5. Removed the front plate mount and installed color keyed bumper plugs
6. Hellwig rear sway
7. Mopar black exhaust tips
8. FabTech 2" leveling kit and alignment
9. Fuel Rebel (D680) 20X9 +1 with Nitto Ridge Grapplers in 305/55R20

 

[Ramit392]

Bed rug not being made for Rambox.

What a shame.):

 

[z0n3]

It has been a busy few weeks since I bought my Ram....

1. Had the front windows tinted to match.
2. Changed out all the emblems from chome to black - RAM on grille, doors, tailgate and sport hood
3. Tazer DT
4. Mopar bed divider
5. Removed the front plate mount and installed color keyed bumper plugs
6. Hellwig rear sway
7. Mopar black exhaust tips
8. FabTech 2" leveling kit and alignment
9. Fuel Rebel (D680) 20X9 +1 with Nitto Ridge Grapplers in 305/55R20

Damn sounds like you’ve been having some fun with that thing. Did you self install the leveling kit or take it to a shop?

 

[Hockeydad]

Replaced front dash corners with infinity ref- 3032cfx and rear doors with infinity pr613is wow what a amazing difference.

 

[Mystyborne]

Put in Diode Dynamics Multicolor LED Boards. At the end of the video it shows how they look white, which is what I will typically use.

 

[aametzger]

Today I got the chrome window trim wrapped in gloss black. Over the last few weeks, I have also done the following:

1. Borla s-type cat-back
2. S&B CAI
3. Front window tint
4. Body-color mirror caps
5. Gloss black window trim
6. Nitto RG 305/45/22 XL
7. Hellwig sway bar

Loving this truck so far - got it about a month ago. This forum is feeding my addiction for customizing vehicles. Thanks for everyone's info on here!