What did you do to your Ram today???

[Mustangmike66]

Finally got it after ordering it May.

Sent from my iPhone using Tapatalk

 

[Lize]

I seem to recall someone talking about the black plastic cover under the truck that is around some cables that run along the frame by the gas tank. I can’t find it on here anywhere but mine got messed up today running through a flooded part of the road.

I had that issue. It’s a post about it for sure. Same way most of ours has come off

Fuel rail cover

I looked for that yesterday as I remember reading a post but couldn't find it either.
Today I see this:

Following new Ram

Any idea what that is underneath his truck? I tried to catch up with him, but he turned off before I could get his attention. The way it moved and fluttered around, looked like a strap.

5thgenrams.com

 

[BlckDT]

Last week got Ceramic coated. Saw that the shop put pics up on their FB page.

 

[ej23]

Decked drawers went in today. My wife and I kind of split the work. I started the process during lunch, she finished most of it and we put the final touches in after work. Not a bad install looks like is is exact;y what I expected.

 

[2Fast-4U]

Gave my girl a nice foam bath and going to give her a polish and install my new bumper plugs from cobrar97! Will dress the bumper off nicely. Then a little bourbon for me!

 

[TheMadDutchDude]

Not today... but tomorrow...! I will be picking up my headlights (they are waiting for the left tail) and installing them. I can’t wait.

 

[z0n3]

Test fitted it inside my garage. Need somewhere to store it after I ceramic coat it next weekend. Had maybe a couple inches to spare haha.

 

[Chippy]

How would you rate the product? Would be great to see a review post in the mods forum - thanks for the tip!

2019 to 2024 RAM 1500 Sprint Booster V3

www.sprintboostersales.com

I started a thread simply called Sprint Booster were I gave my impression and how I installed it. I was at Sema when they won a big award that year and they have continually improved it. No negative comments or bad stories anywhere to be found. A solid simple product.

 

[User_18177]

Test fitted it inside my garage. Need somewhere to store it after I ceramic coat it next weekend. Had maybe a couple inches to spare haha.
View attachment 34292
View attachment 34293
View attachment 34294

And you just squeeze out of the rear sliding window?

 

[z0n3]

And you just squeeze out of the rear sliding window?

It might actually be easier than getting out of the driver side door!

 

[TheMadDutchDude]

She’s done... I’m so extremely happy with the result.

 

[coffeyman76]

BIG DAY. I've been stockpiling mods since I got the truck in July and have been so busy with work and a beach remodel that they've sat there. Very much enjoying the truck but today...today she's a different animal. Dropped it off at my local shop for:

2" Daystars and DIY (mod here) air ride adjustable links. Ride quality is unchanged, vehicle sits perfect.
Truxedo Soft Roll Up Tonneau cover for RamBox
S&B CAI
Tint - 20% match on the front doors and 35% on the windshield (SC, no inspection)
Hellwig Rear Sway
Alignment

$616 (labor/install). Maybe not the cheapest, but I thought it was fair for a place that I trust. Also had to remove dealer tint before installing.

Pedal Commander (I did this myself after they were done).

Holy freaking &%(#)$#. Wow.

I drove it home before the PC install. Intentionally took a winding road. The S&B CAI is a nice addition. Just enough throaty response to known you have a Hemi but no drone. I can't tell you it made it a Hellcat but it makes a nice audible impression and may have picked up a few steps.

The Hellwig...I mean for the money BEST ADD EVER. I'm on the middle setting the truck is just so much more responsive. It just feels stuck. The ride before was quality but also a bit sloppy, overcorrected for softness at the expense of lean and play. No more. Really makes a solid improvement and that's my opinion after 20 miles or so.

The DIY links are so easy and cheap. Combined it's a great lift (level), no errors on any setting and now I can get some new rubber. Truck sits great, I notice no appreciable change in ride quality.

PC is no freaking joke. A bit scary on Sport+ and rainy wet conditions. I'm setting on Sport 0 right now and it feels perfect but I've got 3 miles on the settings. So much fun to adjust and watch what happens.

Now onto the new rubber, brake caliper covers and Plasti-dip/badge black out. Going with 305/45r22 in an 8 ply tire (XL) most likely. Keep the ride quality and get the size and appearance. Pics (before and after). Sorry, crappy rainy day here.

 

[ej23]

Today added a Tyger T3 soft folding cover, just to conceal the drawer system below and keep a little rain out. Yes it is an inexpensive cover and a little water is sure to get in, but I am happy. Main goal was just a little concealment over the decked drawer system and easy to remove.

 

[sergetexan]

Wow

Last week got Ceramic coated. Saw that the shop put pics up on their FB page.

View attachment 34280
View attachment 34281

View attachment 34282

View attachment 34283

View attachment 34284

Wow! That looks great! Who did your coating? which product did they apply?

 

[NinjaMJD]

I bought it

 

[BlckDT]

Wow

Wow! That looks great! Who did your coating? which product did they apply?

Detail Troy LLC in Troy, MI. Great shop! They only use Cquartz Ceramic coating.

 

[saxapl]

Got the kennel in.

 

[Diamondback]

well not today (but a few days ago).

I got to work on both MOPARS I've ever owned

Durango R/T (Had to do a Certified Used Car Inspection) and 2019 RAM Laramie Sport (taping up the windshield and pillar for testing to submit my FCA claim for water on the floorboard). - the truck had just had the Ceramic done as well. So slick and smooth, I was afraid to touch it at all.

 

[tul9033]

Is the correct part for these bulbs Zevo 921?
EDIT: I got the plain Sylvania 921 LED. Installed them a it ago and I don't find them any brighter. Whiter, but not brighter.

Swapped in Sylvania LEDs. Looks better than what is shows in pictures.

 

[Diamondback]

Today I pulled the lid off my pass side RAMBOX to look at a few things.

RamBox warped and misaligned

I wish mine had all 4 accessible! Mine is a later build but still has half and half. I need to remove my boxes anyways to inspect those spacers (washers) on the bottom to try and sink the box down more. I wonder if all 4 bolts are needed anyways? I would think just the 2 you can reach from...

5thgenrams.com

I was also looking into seeing if I could "meld" the top black plastic back to the main painted portion:

RamBox warped and misaligned

I wish mine had all 4 accessible! Mine is a later build but still has half and half. I need to remove my boxes anyways to inspect those spacers (washers) on the bottom to try and sink the box down more. I wonder if all 4 bolts are needed anyways? I would think just the 2 you can reach from...

5thgenrams.com