What did you do to your Ram today???

[Hustleman216]

Nothing today but this bad boy is going on tomorrow!

 

[Usfdrohead]

Picked up my first truck last week. In the last two or three days Ive swapped the Grill Badge to the black from Mopar, Tinted the front windows to match, installed N-Fab Epyx Side Steps, and today dropped it off to get ceramic coated. Have a couple more parts on the way then can take proper pics.
View attachment 28941 View attachment 28942

Mopar sells the black RAM badge in the grill? Can you provide a link? I don’t see it on their horrible site.

 

[BigSkyJK]

I bought one from ebay a few days ago, 2019 RAM Matte Black RAM Grille Nameplate, $26.50 delivered. Sorry I don't have a link. avondaleautomotive is the seller.

 

[Mighty Snowpants]

Mopar sells the black RAM badge in the grill? Can you provide a link? I don’t see it on their horrible site.

I found an OEM black RAM insert on eBay. There's a whole thread on it somewhere on this forum.

 

[Mighty Snowpants]

Found what you're looking for on Amazon. OEM part. https://www.amazon.com/DODGE-Matte-Black-Grille-Nameplate/dp/B07G23KKY7

OEM MOPAR part #68298470AA

Removing silver letters pretty easy once you get the knack of it. I used 2 tools. The sharp tip of the knife on my Leatherman. You stick the tip just at the edge of the letter corner and then pry. Then stick plastic pry bar in the gap and yank it out. You will hear small "snaps" - that's OK. Once you see the back of the replacement black letters you'll know what you're dealing with. It took less than 10 mins to pry out the sliver RAM letters and snap the black ones in. Easiest mod I've done.

 

[Edwards]

Finally got around to getting PPF installed on front of rear wheel flares and rocker panel in front of rear wheels. Ready for long term, worry-free driving - as far as rock chips are concerned.

 

[Tommym]

Installed a Mishimoto Oil Catch Can.

 

[cotonymopar]

Washed it!

 

[coffeyman76]

Rambox dividers from a forum member. Great addition. Not sure I could ever have another truck without this storage. In just one side I've got all the cleaning supplies I'd ever need along with my "roadside emergency kit" ;-) The other side is all my work gear, boots, hard hat, vest, tapes, etc. And there is still plenty of room.

On deck is the rear LED lights, screen protector, tonneau cover, CAI, Pedal Commander, 2" front level links and spacers and tint - lord this black gets sooooo hot. All of those items are here in my garage so I'm excited to get started.

 

[W13NY]

Washed & put a coat of Chemical Guys wax on it

 

[ppowell1983]

I polished it with Liquid Glass and had the leather conditioned. This black paint is freakin amazing. I love it.

Sent from my iPhone using Tapatalk

 

[Techguy2000]

Installed Undercover Ultraflex, Bedrug classic and an Amp BedXtender HD Max. Still figuring out how best to get the bed lights to snap in over the bedrug as well as potentially mount the receiver plates for the bed extender over the bedrug.

Tomorrow morning should be adding the factory trailer brake controller.

 

[ForTehNguyen]

bed utility group with divider, Tuffy security lids for the ram bins in the cab came in. Will be installing tomorrow morning

 

[TheDadTruck]

Mopar sells the black RAM badge in the grill? Can you provide a link? I don’t see it on their horrible site.

The Amazon link above is the exact vendor I ordered from and is the correct p/n. It really is super easy to install... I would recommend using a razor to slide under the letters and lift enough to slide a plastic pry under and pop off... took 5 mins total and no nicks or damage to the mounting bases.

Im having withdrawals, I feel like Ive barely gotten to drive it.. I pick my truck up from getting ceramic coated tomorrow!

 

[Edwards]

bed utility group with divider, Tuffy security lids for the ram bins in the cab came in. Will be installing tomorrow morning

View attachment 29234

Thanks for this! Hadn't realized they had the DT version out yet. And they have a sale on through 6/30 where you get $22 off of two with free keyed alike thrown in.

I am a bit hesitant since they remove the two tie downs (not sure I'll ever need them) and you wind up with a fair amount of powder coated steel exposed to get stepped on and the rubber mats to wear on. Maybe if you got the covers LineX'd before installation?

 

[whetrick1]

Thanks for this! Hadn't realized they had the DT version out yet. And they have a sale on through 6/30 where you get $22 off of two with free keyed alike thrown in.

I am a bit hesitant since they remove the two tie downs (not sure I'll ever need them) and you wind up with a fair amount of powder coated steel exposed to get stepped on and the rubber mats to wear on. Maybe if you got the covers LineX'd before installation?

Where's the link to the site to buy them
Opened the link and all I got was a picture of them


Sent from my iPhone using Tapatalk

 

[Cannonball]

Sent from my iPhone using Tapatalk

I'm digging the pin stripe... What's the story on that?

 

[z0n3]

Gave her a nice wash and wax this morning.

 

[ForTehNguyen]

Where's the link to the site to buy them
Opened the link and all I got was a picture of them

Looks like the buy 2 get $22 off and free keying for both ends tomorrow. The stock picture shows the bin removed but the instructions said if you want to keep the removable bin, youll hvae to do some cutting of the plastic bin.

In-floor Locking Lid | RAM Trucks | 2019-2020 - Tuffy Security Products

Secure your vehicle's storage space with Tuffy Security Product's RAM In-Floor Security Lid. This heavy-duty locking lid replaces the flimsy, plastic cover from the factory with 16-gauge welded steel. It creates a secure space in the hidden floor compartment, ideal for securing valuables and...

www.tuffyproducts.com

 

[NordicNevs]

Got another day closer to handing the keys to my wife


Sent from my iPhone using Tapatalk