What did you do to your Ram today???

[Idaho970]

Got my 2 inch levers in today. Flowmaster outlaw cat back exhaust and caliper covers coming at the end of the month. Was thinking of getting a pedal commander or the pulsar module, has anyone used either of them and what are your opiions of them?

I have the JMS PedalMAX and I absolutely LOVE it! made such a huge difference in throttle response. What I like the most is how quickly you can change it. quick twist of the button and you unleash all those little ponies under the hood. Can't speak to the other pedal controllers, but this one gets 5 stars from me for simplicity.

JMS PedalMAX

What leveling struts did you go with?

 

[Idaho970]

From member Acogs91...Highly recommend...Great communication and ships out promptly

Where did you get the bumper plugs?

I second the bumper plugs. @Acogs91 was super easy to work with and they match perfectly! Now starts the countdown until highway patrol hassles me for them.

 

[ReLLIK75]

New to the forum and Ram itself but loving it so far...Today I did my first official mod to the truck...Added the MGP Caliper Covers in red...Install was very simple, other than having to jack up the truck and remove each tire separately...I think they look pretty decent and add a nice little touch...Ordered Go Rhino RB20 running boards that should be here Friday and also ordered the color matched front bumper covers that should be there any time...I think I’m going to powder coat the front tow hooks red...Here are the pics of the caliper covers...View attachment 91733View attachment 91734View attachment 91735View attachment 91736

Have the same ones....love the way they look. The only issue with them (probably not an issue for you) is that they require 20" rims. My stock rebel rims were 18". So when I upgraded to 20" Fuels, I had to do my spare, as well. If you don't, and you ever need your spare, you'll get a nice grinding noise as you drive down the road.

 

[vincentw56]

That is sharp! I would really like to do that too . Difficulty level, I read was pretty high. Thread link or suggestions?

Adding Passive Entry: How-to

If you've seen the original thread on adding passive entry, HERE, you are likely well aware of the issues with getting it to work on the newer trucks that didn’t come with it from the factory. This thread will walk you through getting it to work on the 5th gen DT’s (and the HD trucks) just as it...

5thgenrams.com

It isn't hard, it is just time consuming. The post is very detailed about it.

2020 Bighorn Night Edition, 5.7 Hemi w/eTorque

 

[RebelWraith]

No way? Dang no the brake pedal they sent me is way smaller than the stock pedal. Bummer!

You have to take the factory rubber cover off the brake pedal. The accelerator you just slip over the plastic pedal.

 

[DONZILLA]

View attachment 91970

Installed new TRX push to start button. No need to pull radio out or dash apart. Could literally do it again in 90 seconds. Super easy and just one more thing to set myself apart from the crowd.

How did you do that? Wher can I buy one? Looks great!

 

[SkittleRam]

Got Skittle all cleaned up this weekend

 

[WReckeR]

Got Skittle all cleaned up this weekend

View attachment 92178

I like that name. Non-traditional, whimsical, and reflects the candy shell it has.

 

[DONZILLA]

Coopers are great tires. I’ve had a few sets.
Then I discovered Michelin LTX’s! I don’t think I’d go back now.

I got some for sale off my 2020 with the chrome stock wheels!

 

[SkittleRam]

I like that name. Non-traditional, whimsical, and reflects the candy shell it has.

thanks! My kids came up with the name and I agree very fitting and different.

 

[DONZILLA]

New to the forum and Ram itself but loving it so far...Today I did my first official mod to the truck...Added the MGP Caliper Covers in red...Install was very simple, other than having to jack up the truck and remove each tire separately...I think they look pretty decent and add a nice little touch...Ordered Go Rhino RB20 running boards that should be here Friday and also ordered the color matched front bumper covers that should be there any time...I think I’m going to powder coat the front tow hooks red...Here are the pics of the caliper covers...View attachment 91733View attachment 91734View attachment 91735View attachment 91736

Love those covers. They fit only on 20's? Aftermarket too? I have Fuel Sabers.

 

[Acogs91]

I second the bumper plugs. @Acogs91 was super easy to work with and they match perfectly! Now starts the countdown until highway patrol hassles me for them.

Thank you sir! Enjoy them. The smalls things that make this truck look so much better. Hate that Ram puts those holes in the bumper!


Sent from my iPhone using Tapatalk

 

[silverWS6]

Put my new wheels/tires on this weekend. 4play 22 inch 4p08 on 33x12.5 Toyo Open Country ATlll. So far I’m happy with the purchase if anyone knows a good tire pressure to run these let me know please!

That looks sharp!!

 

[Rjshoaff1]

That looks sharp!!

Thank you!

 

[tom318]

Installed truck covers USA American roll cover. Product feels very heavy duty but the fit at the tail gate end could be better. The overlapping lip on the cover is small and the thick tailgate cover on the inside of the tailgate interferes with the cover before it can overlap the gate. May try to trim the tailgate cover and have it re-sprayed with bed liner. Areas highlighted in red interfere.

 

[c3k]

My drivers leather seat on my Limited was wearing on the door side. Only 9000 miles on it. Took it to my dealership. Chrysler denied warranty on it. I opened a claim with FCA. Chrysler still denied it saying it was wear and tear. I said “Are you telling me that the premium leather you use on your Limited won’t last 9K miles?”
I spoke with the GM at my dealership and he had his service dept. replace it for me. No charge. Retail price was $1100 plus labour.
They also replaced the drivers side power step because the paint was wearing on it at the same time. I’m lucky I have a great dealership I deal with!View attachment 91934

Name names!

Give the good ones the positive press they've earned. (Just as much as we should all warn each other about the bad ones.)

 

[21Longhorn]

Put my new wheels/tires on this weekend. 4play 22 inch 4p08 on 33x12.5 Toyo Open Country ATlll. So far I’m happy with the purchase if anyone knows a good tire pressure to run these let me know please!

How do you like the tires? Looks like they fit the wheel well good, do you have it leveled or is it stock?
Truck looks Great!!


Sent from my iPhone using Tapatalk

 

[Rjshoaff1]

How do you like the tires? Looks like they fit the wheel well good, do you have it leveled or is it stock?
Truck looks Great!!


Sent from my iPhone using Tapatalk

So far I like them. Not a lot of noise and no vibration on the highway. The truck is level with Bilsteins in the front and thank you!!!

 

[GATORB8]

Tint went on today. 35% fronts, 20% visor.

 

[Pete M]

My drivers leather seat on my Limited was wearing on the door side. Only 9000 miles on it. Took it to my dealership. Chrysler denied warranty on it. I opened a claim with FCA. Chrysler still denied it saying it was wear and tear. I said “Are you telling me that the premium leather you use on your Limited won’t last 9K miles?”
I spoke with the GM at my dealership and he had his service dept. replace it for me. No charge. Retail price was $1100 plus labour.
They also replaced the drivers side power step because the paint was wearing on it at the same time. I’m lucky I have a great dealership I deal with!View attachment 91934

Lucky you got it replaced. At 22000 miles mine has wrinkled to the point of cracking. Again Ram is saying this is normal wear and tear and will not replace under warranty. My dealership, S and L Motors in Pulaski WI has been unwilling to stand up and cover the defect. They just say Ram won’t cover so nothing we can do. I guess your dealer choice is important. Normal wear and tear in cracking leather seat after 2 years and 22000 miles? Perhaps so I you supply your vehicles with very inferior leather