What did you do to your Ram today???

[19BlueStreakSport]

Installed Bushwacker Flares, modified rear most spat to work with the flares and cut fender liner bracket in anticipation of my 2" front wheel spacers (2.5 for back - BORA)

Going to look a little funny for probably a month or so until they come. Tires set in too far for my liking but I wanted to get flares install they take up too much space in garage.



Keep on or remove? Debating this.

 

[z0n3]

Changed the oil for the first time on my truck. Just over 5k miles. Also swapped the cabin air filter. Seems like they added another obstacle in the way of the oil filter when I compare my 2019 and 2021. Some wires and plastic clips. Pulled those out of the way and used the ziplock bag method, which actually worked like a charm this time.

 

[User_63152]

Just looked at your signature and picks. I got the same hdx steps

I love the steps. I've gotten numerous compliments from people.

 

[Doc33]

Installed Bushwacker Flares, modified rear most spat to work with the flares and cut fender liner bracket in anticipation of my 2" front wheel spacers (2.5 for back - BORA)

Going to look a little funny for probably a month or so until they come. Tires set in too far for my liking but I wanted to get flares install they take up too much space in garage.

View attachment 91009

Keep on or remove? Debating this.
View attachment 91010View attachment 91011


View attachment 91012View attachment 91013

Keep it on, matches piece on lower part of the bumper.

 

[GATORB8]

Put on the Carven Polished 5” tips this morning (Moes has a great deal on them). They don’t look much bigger off the truck compared to the stock but I think they look really good installed.

My new Ridge Grapplers finally came in this week. The 295/65R20s fit with no rub on stock rims with the Motofab 3/2.

 

[19BlueStreakSport]

Keep it on, matches piece on lower part of the bumper.

Thanks! Yeah I am back and fourth on that. I'm going to leave them on for now and see if they grow on me. When you zoom in on the picture you just see the plastic not wrap under the truck and it's sort of in mid air if you get what I'm saying.

But that was the exact reason I put them on after cutting so they would match the piece coming from the bumper.

The issue is where I cut, it just looks "unfinished" because it just stops. Even though I put on rubber edging.

 

[DONZILLA]

Mines only two days old to me and I'm loving it! Put Weathertech window deflectors on front driver and passenger sides. Every vehicle I've owned in the past 25 - 30 years have had these. Da bomb! More to come of course. Oh, and sorry, didn't take a picture.

I got some worse than crappy AVS's as Weathertech wasn't out yet last year. I'll ripping that mess out as soon as get these.

 

[DONZILLA]

Put on the Carven Polished 5” tips this morning (Moes has a great deal on them). They don’t look much bigger off the truck compared to the stock but I think they look really good installed.

My new Ridge Grapplers finally came in this week. The 295/65R20s fit with no rub on stock rims with the Motofab 3/2.

So much better than the puny 4 inch. Great job!

 

[User_63152]

So much better than the puny 4 inch. Great job!

Puny 4''? WTF?

 

[RebelWraith]

Puny 4''? WTF?

Yes, the 5" tips fit the size of the truck much better. Even Mopar made the 5" tips.

 

[User_63152]

My puny 4'' tips look ok to me. I like the black chrome

Those Carven tips do look pretty sick, though.

 

[User_63152]

My MBRP muffler has arrived! Hopefully, I will get to it in the next week or so. Been busy busy.

 

[Phatman112]

Got my Go Rhino delivered today and installed them. Love the RB20 look and feel. Definitely worth the bedliner spray on them.

Sent from my iPhone using Tapatalk

 

[Jabberjaw]

Found the perfect spray paint for OEM running boards.

OEM Running Board Paint Match - Solved

I bought a set of used OEM running boards locally for a great price, but each side had minor damage to the outer edge. I went out and bought 3 contenders for touch up. The winner. I’ll likely sand and spray again later, but the color is an almost perfect match.

5thgenrams.com

 

[SKT Customs]

New Aluminum Pedal Inserts installed...Sold by Motrobe on Amazon for $20. Nice fit and looks better than OEM rubber pads. Tight fit and about 10 minute install. Link below.

Amazon.com: Motrobe Dodge Ram 1500 2019 2020 2021 Accessories Pedal Covers, Anti-Slip Aluminum Alloy Brake Gas Fuel Accelerator Foot Pedal Pads Kit Fit for Dodge Ram 1500 NOT FIT RAM TRX: Automotive

Buy Motrobe Dodge Ram 1500 2019 2020 2021 Accessories Pedal Covers, Anti-Slip Aluminum Alloy Brake Gas Fuel Accelerator Foot Pedal Pads Kit Fit for Dodge Ram 1500 NOT FIT RAM TRX: Body - Amazon.com ✓ FREE DELIVERY possible on eligible purchases

www.amazon.com

Dangit dude just when I thought I was done buying stuff for the truck

 

[SKT Customs]

Dangit dude just when I thought I was done buying stuff for the truck

Nevermind, it says they’re “unavailable” now

 

[SKT Customs]

My puny 4'' tips look ok to me. I like the black chrome

Those Carven tips do look pretty sick, though.

You should adjust them a bit, it makes them fill out the opening better in my opinion

 

[User_63152]

You should adjust them a bit, it makes them fill out the opening better in my opinion

How do you go about adjusting them?

 

[RebelWraith]

How do you go about adjusting them?

Loosen the retaining coupler just behind the exhaust tip. Move the exhaust tip to where you want it and then tighten the coupler back down.

 

[DanoUF]

Nevermind, it says they’re “unavailable” now

Looks like I jumped on them right in the nick of time. They should be here on Monday.