What did you do to your Ram today???

[NoCrow]

Hellwig sway bar installed today. Yes it is painted red. Also installed the Mopar bed step. Love the way all you see is the tab until you deploy the step. Solid feel
View attachment 87662View attachment 87663View attachment 87664

Yup that's why I opted to pay a little more for the mopar step. It's so sleek and hidden. Worth it to me

 

[abtennyson]

I love this idea!

Did you rely on the adhesive of those products? I wonder if it will hold in the Florida heat.

I did for now... if they start to fail I’ll use outdoor mounting tape, it’s worked on everything so far even in the summer heat.

 

[brian1684]

well thanks to this forum and the last 70 pages i have went through since i am new here, i now realize i want a different exhaust... really don't know how the wife is gonna take that after buying a brand new truck, and dropping another $1500 on it already in the first week... leaning towards a borla s, but will do more research, not in any big hurry so have some time to think about it.

 

[Kewlone2gq]

well thanks to this forum and the last 70 pages i have went through since i am new here, i now realize i want a different exhaust... really don't know how the wife is gonna take that after buying a brand new truck, and dropping another $1500 on it already in the first week... leaning towards a borla s, but will do more research, not in any big hurry so have some time to think about it.

You could always try the better gas mileage viewpoint like I did. Only took a few months, lol. Love my Borla S with black tips. Was worried that the Atak would wake my neighbors.

 

[brian1684]

You could always try the better gas mileage viewpoint like I did. Only took a few months, lol. Love my Borla S with black tips. Was worried that the Atak would wake my neighbors.

Yea, we actually have neighbors that do nothing but rev pos vehicles at all hours of the day/night. Drives my wife crazy, while I dont mind a loud exhaust, i dont see the point of just sitting parked in a vehicle and revving it over and over and over non stop. I mean they will literally come out, get in a vehicle, start it, rev it 3-4 times, shut it off and go back in, or drive around the block and park and rev it again, then go back it... so may be a little bit of a hard sell, but she has said its my truck and to make it what i want...

 

[21_Tank]

Personally I love the debadged look. I removed everything except the hood badge and tailgate ram head. So much cleaner and everyone still knows it’s a ram lol


Sent from my iPhone using Tapatalk

I debadge everything i get. I think it looks cleaner, it's easier to wash AND wax when it's de-badged. Just did my '21 Ram 1500 BTS today. Same thing- I used fishing line and a plastic razor blade. My adhesive came off easy since my truck was a factory order and I've only had it a week.

 

[Jeeper]

well thanks to this forum and the last 70 pages i have went through since i am new here, i now realize i want a different exhaust... really don't know how the wife is gonna take that after buying a brand new truck, and dropping another $1500 on it already in the first week... leaning towards a borla s, but will do more research, not in any big hurry so have some time to think about it.

consider the Solo Performance MR300 muffler delete! Sounds amazing and easy install.

Sent from my SM-G781W using Tapatalk

 

[GrayRam20]

Also put my bumper plugs in. Shout-out to Acogs91, they match perfectly!

Did/do you find the volume doesnt change at all after 25? Mine doesnt seem to get any louder. My truck or a ram thing?

want to upgrade to new 6x9 and amp too.

 

[FATKID]

Received this email directly from Mopar (Address: [email protected])

Hope this helps someone out there looking for a deal.

Enjoy!

 

[GrayRam20]

consider the Solo Performance MR300 muffler delete! Sounds amazing and easy install.

Sent from my SM-G781W using Tapatalk

Did the MBRP replacement muffler, only thing is around 1500rpm little to deep/ burppy sounding but happy overall and the gf hasn't asked why its louder haha so i guess its just enough, though I can here it from inside do its cold start in the am.

 

[Malodave]

I got the LED Cab Lights mounted on the Roof. I need to
make the Center Light connection to the Wire Harness I made.
Then it is just wiring it to the Parking Light Fuse.

I will Tweak the Template I made and then post it on the Installation Post.

Malodave

 

[GrayRam20]

I got the LED Cab Lights mounted on the Roof. I need to
make the Center Light connection to the Wire Harness I made.
Then it is just wiring it to the Parking Light Fuse.

I will Tweak the Template I made and then post it on the Installation Post.

Malodave

I've been eyeing up this cabover company that sells wireless solar charging one and they seem legit, other then having to figure a way to custom mount the remote to the dash area and make it like a button. n $400 later..... but no drilling and multiple functions low/high/strobe.

 

[HSKR R/T]

I debadge everything i get. I think it looks cleaner, it's easier to wash AND wax when it's de-badged. Just did my '21 Ram 1500 BTS today. Same thing- I used fishing line and a plastic razor blade. My adhesive came off easy since my truck was a factory order and I've only had it a week.

My tailgate badges peeled right off leaving just a little residue some adhesive remover and a microfiber wiped right off. Had I tried to use fishing line from the start would have made a bigger mess. But that was done day three of ownership, and I got it right out of railyard, so badges may have been physically in the truck for less than two weeks.

 

[GadgetMason]

I've been eyeing up this cabover company that sells wireless solar charging one and they seem legit, other then having to figure a way to custom mount the remote to the dash area and make it like a button. n $400 later..... but no drilling and multiple functions low/high/strobe.

caboveramerica.com. On my list too. No drilling, wireless use, solar recharge...

 

[minmar10]

Installed my MTI Acoustics box with JL Audio 12’s today. Sounds great!!

 

[GadgetMason]

Installed my MTI Acoustics box with JL Audio 12’s today. Sounds great!!

What are you using for an amp and interconnect to the stock system? Love to see more info. Love MTI products. Very stylish

 

[Le_Slacker]

Not sure when this happened, but getting fixed today...
No bubbles when drenched with soapy water, and dash not showing any pressure loss yet

 

[minmar10]

What are you using for an amp and interconnect to the stock system? Love to see more info. Love MTI products. Very stylish

I used a amp pro sub because I only wanted to amplify my subwoofers not the whole system.

AmpPRO Subwoofer Interfaces - PAC

Subwoofer solutions for OEM radios

catalog.pac-audio.com

 

[pmegason]

Installed my MTI Acoustics box with JL Audio 12’s today. Sounds great!!

Witch JL 12's are you running? I really like the way that box looks over the one I have. Do you know the volume of the box by chance?

 

[Klicht87]

well thanks to this forum and the last 70 pages i have went through since i am new here, i now realize i want a different exhaust... really don't know how the wife is gonna take that after buying a brand new truck, and dropping another $1500 on it already in the first week... leaning towards a borla s, but will do more research, not in any big hurry so have some time to think about it.

Check out the Carven Exhaust. I don't have it but recently came upon it and the video clips of it sound pretty darn good.