What did you do to your Ram today???

[bradmdello]

Installed switch pros sp9100 and Baja designs LP4s. Retrax XR, rhino rack crossbars. And 1 up flush mount bike racks. Ready for family adventures.

waiting for the tazer DT to arrive. for a front camera install.

First post, appreciate the experience and knowledge from the forum.

 

[NewTruckWhoDis]

Damn...I have the MFT but no step
...and I'm sure it's a million dollar add on from Mopar...lol

Sent from my SM-G781W using Tapatalk

2019-2021 Ram 1500 Bed Step, For Multi-Function Tailgate 82216265ab | My Mopar Parts

2019-2021 Ram 1500 part # 82216265ab - Bed Step, For Multi-Function Tailgate

www.mymoparparts.com

I've seen it as cheap as $319. Pricey, but honestly kinda worth it.

Sent from my SM-G996U using Tapatalk

 

[kevinvw]

2019-2021 Ram 1500 Bed Step, For Multi-Function Tailgate 82216265ab | My Mopar Parts

2019-2021 Ram 1500 part # 82216265ab - Bed Step, For Multi-Function Tailgate

www.mymoparparts.com

I've seen it as cheap as $319. Pricey, but honestly kinda worth it.

Sent from my SM-G996U using Tapatalk

#truth

 

[HSKR R/T]

Added some vinyl to my Vararam lid.

 

[Jabberjaw]

Removed the factory decals and finally got FedEx to figure out where my tonneau is. Now I’m hoping it gets here damage free.

 

[My_first_RAM]

Added a simple rubber-foam trim to better integrate and cover the sportbar base.
View attachment 85999

Disconnected the HK Boomy/unbalanced subwoofer:
UPDATE: For reasons Unknown to me; disconnecting this while effective in disabling the sub ALSO disabled android Auto and BlueTooth audio playback for me! I've taken the video down for now until answers can be had. Not recommending this disconnect.

What rubber foam trim did you use? I have the sport rack and I hate the gap.

 

[My_first_RAM]

Installed the BW pocket flares last week and the Go Rhino RB20 steps yesterday. Still waiting on my stupid Fox 2.5 coilovers with DSC to ship. Matching rear 2.5 reservoirs with DSC, rear 1” top spacer and ready lift UCAs are just sitting in the garage waiting. Stupid Covid delays.

 

[redneck]

last 2 days i have been buffing bedliner overspray off my white truck & doing 2 coats of ceramic coating. i was to get my borla exhaust on sunday but fedex lost it just says delivery pending & fedex cant find out where it is. ugh lets blame covid

 

[Mountain Whiskey]

Removed the factory decals and finally got FedEx to figure out where my tonneau is. Now I’m hoping it gets here damage free.

They found it? Did they tell you it got snagged on the delivery trucks bumper a few days ago and the driver just noticed it? Yup, it will be damage free.

 

[Drumnut14]

Installed my new MX4 on the Rebel, looks great I think.

 

[Jabberjaw]

They found it? Did they tell you it got snagged on the delivery trucks bumper a few days ago and the driver just noticed it? Yup, it will be damage free.

In true good customer service fashion they called me with an automated response. I recently saw the worst FedEx had to offer. Not mine, but an axle barbell probably rated to pull well over 1000 lbs showed up with a 30 degree bend. No explanation. No apology. I know these carriers are China Virus related overburdened, but make it up with good customer service.

 

[spb_sloram]

2/4 drop

 

[Jeepdinger]

Installed the BW pocket flares last week and the Go Rhino RB20 steps yesterday. Still waiting on my stupid Fox 2.5 coilovers with DSC to ship. Matching rear 2.5 reservoirs with DSC, rear 1” top spacer and ready lift UCAs are just sitting in the garage waiting. Stupid Covid delays. View attachment 86606View attachment 86607View attachment 86608

These wheels are gorgeous. Love that concave look, thought they were 4plays at first. Love the look.

 

[mlcarril]

Does that turn off the passenger side also?

Yes

 

[pmegason]

Here is what I installed this last weekend. Installed the amp in the console so I could have access to it. All I use the console for is junk anyway so it keeps me from putting stuff in there.

 

[Jeeper]

last 2 days i have been buffing bedliner overspray off my white truck & doing 2 coats of ceramic coating. i was to get my borla exhaust on sunday but fedex lost it just says delivery pending & fedex cant find out where it is. ugh lets blame covid

I hear ya...just noticed on my first wash a crazy amount of overspray from the factory bedliner. A good clay bar took the majority of it out.

Sent from my SM-G781W using Tapatalk

 

[CMil527]

2/4 drop
View attachment 86643

lookin good!

 

[Vinnie.]

Ripped off the stupid dealer sticker they put on the tailgate. Also fixed my wonky exhaust tips. My wife pointed out the right one was lower, and I went and checked and it was probably a good inch lower than the left. I also saw that the hanger want seated properly in the isolator. I fixed that and that pulled the tip wayyyy out of wack. There’s a clamp holding the exhaust tip with a 13mm bolt. I loosened it up and adjusted the tip to sit closer to the bumper and centered in the cutout. I realized the left one was lower than I wanted so I fixed that as well. I got them where I I want them...I think.

 

[‘19ramlveryeha]

I did 2.5 front and raised the rear 1.5 for that reason.

Sent from my SM-G988U using Tapatalk

I’m hoping to get this done this weekend.


Sent from my iPhone using Tapatalk

 

[Snwjnky]

Ripped off the stupid dealer sticker they put on the tailgate. Also fixed my wonky exhaust tips. My wife pointed out the right one was lower, and I went and checked and it was probably a good inch lower than the left. I also saw that the hanger want seated properly in the isolator. I fixed that and that pulled the tip wayyyy out of wack. There’s a clamp holding the exhaust tip with a 13mm bolt. I loosened it up and adjusted the tip to sit closer to the bumper and centered in the cutout. I realized the left one was lower than I wanted so I fixed that as well. I got them where I I want them...I think.

One of mine hangs a little lower too

Sorry, couldn't resist.