What did you do to your Ram today???

[Bwsteg]

Recently did PPF on the front bumper, fascia, and headlights. Also tinted the fronts to match and got linex sprayed in.
View attachment 75687
View attachment 75688
View attachment 75689

Do you see any seams with the PPF?

 

[FM45]

@ Renagade -- if you are going from the round oem style to the oem led style, you have to flip the outputs around on the factory plug, meaning Pin 1 has to be placed in Pin 2 position and vice versa. On the round assembly pin 1 is power and pin 2 is ground, the led style is just the opposite...

-=FM45=-

 

[z0n3]

Do you see any seams with the PPF?

Nope, pretty difficult to tell where edges of it are. You would have to really look up close to try and find them. I got XPEL brand for reference.

 

[sbdf1]

A couple small changes but loving both of them. Winter is here so the WeatherTech HP floor liners are coming in handy just in time. Plus no more fingers on the paint thanks to JamHandles!

 

[Waterfowler41]

Swapped out my exhaust system tonight Kooks —> Corsa but the highlight was my 4 year old came out into the garage trying to his from mom. He asked me why I was changing the engine...

 

[djdnl]

Swapped out my exhaust system tonight Kooks —> Corsa but the highlight was my 4 year old came out into the garage trying to his from mom. He asked me why I was changing the engine...

That’s awesome!

Which Corsa model?

I am in great debate with myself.

Borla, Corsa or muffler delete


Sent from my iPhone using Tapatalk

 

[Kazoo]

For Black Friday I finally ordered a tonneau cover. My last truck had an Access Lorado, and I was happy with it for what it was. I would have liked something that allowed me to use a bikerack inside the bed, wasn't ready to pony up the cash for one with a set of T SLots. I ended up going with the Access Limited roll up cover. I did the install myself this time and it came out well. The Limited cover includes an 18 Inch LED light, a almost 6 foot long "grab" bar, and also the tailgate weather striping. I finished it all today except for the tailgate stripping. I'll do that if we get a warmer day. For now I'm good... we've got up to 10 inches of snow coming tomorrow.

Chris

How much was your Line - X??

 

[Waterfowler41]

That’s awesome!

Which Corsa model?

I am in great debate with myself.

Borla, Corsa or muffler delete


Sent from my iPhone using Tapatalk

I have the whole kit but installed just the catback for now. I want to film sounds clips in the sport set up before I throw the resonator delete pipe in.

 

[reidcc]

How much was your Line - X??

I just had the dealer have it done before I picked up the truck, and that was based on convenience more than anything else. It was $500 for the bed on my Quad Cab.

Chris

 

[antwon412]

Put my painted tow hooks back on.

 

[BowDown]

Do you see any seams with the PPF?

Theres no seams unless you do the hood strip or a partial fender.
I did the entire front including the headlights, full front fenders and flares, the a pillar and a 8" wide strip above the windshield. The only place you can see a seam is is on the a pillar parallel to the top of the windshield then on the roof just before the sunroof.
I also did a 1.5" strip at the top of the tailgate just below the top panel and above the handle so I dont scratch out when closing. Thats the easiest seem to see but even then, OIf I didn't tell you it was there, you wouldn't notice it

 

[Mother]

Got the front windows tinted and installed the rear wheel well liners.

 

[joshporterhouse]

New ceramic coat after 500 miles. Loving the truck so far

Sent from my Pixel 3 XL using Tapatalk

 

[Kyles]

Installed GoRecon front headlights, just waiting for the taillights to come in

 

[Bwsteg]

Theres no seams unless you do the hood strip or a partial fender.
I did the entire front including the headlights, full front fenders and flares, the a pillar and a 8" wide strip above the windshield. The only place you can see a seam is is on the a pillar parallel to the top of the windshield then on the roof just before the sunroof.
I also did a 1.5" strip at the top of the tailgate just below the top panel and above the handle so I dont scratch out when closing. Thats the easiest seem to see but even then, OIf I didn't tell you it was there, you wouldn't notice it

View attachment 75782

View attachment 75783

View attachment 75784

Fender and flares is one piece ppf? I was told by my installer who I trust and has done all my vehicles with no seams (everything always tucked and rolled) that it starts to lift in that area if done 1 piece. That’s more of what I was interested in knowing about. I’ve always done ppf on all my vehicles (prefer Suntek over xpel)

 

[sppb32]

Finally after a long wait, instalation took less than 5 minutes, controller fits perfect in that spot.
Went for a short test drive and WOW, in sport mode 6 truck is very responsive, transmission downshift much quicker, worth every penny.

Sent from my SM-G977U using Tapatalk

 

[RebelWraith]

These came in today. Probably install them next weekend as the BDS UCAs won't be here till mid week.

 

[RamVader]

Ram Vader is ready for Christmas! I bought a wreath, added some lights to it, I added some ornaments to it, and wired it up to my trigger switch.

Sent from my iPhone using Tapatalk

 

[BowDown]

Fender and flares is one piece ppf? I was told by my installer who I trust and has done all my vehicles with no seams (everything always tucked and rolled) that it starts to lift in that area if done 1 piece. That’s more of what I was interested in knowing about. I’ve always done ppf on all my vehicles (prefer Suntek over xpel)

No, 2 pieces. Fender and flare are 2 pieces and tucked very well.
Mine is Llumar

 

[knightro84]

Gave her a much needed bath!