What did you do to your Ram today???

[Sherran]

It looks really good on your truck. This makes me wish mine wasn't a lease. I would love to add red stripes on mine. Is this a true silver, or is it a bit of a bronze gray? It looks good with our black wheels. I am curious what it would look like with the gray BTS wheels.

It's actually a satin charcoal grey! I do wish it was a tad bit darker

 

[Dogpatch]

Changed out my rims to some 5 spoke and put some new shoes on her.
Michelin Defender MS 275/55R20’s.

 

[antwon412]

It looks really good on your truck. This makes me wish mine wasn't a lease. I would love to add red stripes on mine. Is this a true silver, or is it a bit of a bronze gray? It looks good with our black wheels. I am curious what it would look like with the gray BTS wheels.

Adding vinyl strips to a lease would be no big deal. Easily removable. And most likely, unless it bakes in the sun for years the paint would match when removed.

 

[PsychoBilly]

Installed the Course Motorsports phone mount and gave him a bath

 

[SilverNight2020]

Adding vinyl strips to a lease would be no big deal. Easily removable. And most likely, unless it bakes in the sun for years the paint would match when removed.

Oh, don't give me ideas....the wheels are spinning.

 

[LimitedGRR]

Simple yet effective locking gas cap

Sent from my iPhone using Tapatalk

 

[Skater]

I just did this exact mod as well. Subtle, but really nice touch. Looks great

Link for that little mod? Looks great. Looking for one like it with Limited on it.

Thanks.

 

[Skater]

l like the idea of this...l have one of these laying around from my 2012 F-150 ... is this one the wrong size ... thx

I believe that should be one that fits a 2019+ Ram 1500 bed. It will sit a little high on the bed due to the curve at the bottom of the bed rail, but if you install a BedRug, or some floor covering, it should fit well without sitting too high. The Ford bed it more square next to the tailgate at the bottom in the corners than the Ram, so you have to fiddle with the alignment a little, but the install took me all of 20 minutes, which included drilling the holes and installing the hardware for the plungers I ripped off my F-150. I did have to get two lock nuts and washers from Lowe's to keep the rotating point in by taking off the tail lights, but there is easy access to where you drill the holes once you get the tail lights removed.

Let me know if you have any questions. More than happy to take off tail lights and send you pics if needed.

 

[HSKR R/T]

Had it ceramic coated inside and out. Full 7 year paint and interior warranty. Interior covers rips, tears, punctures, stains, and even cigarette burns.

 

[z0n3]

Got my truck back finally. Full replacement of front and rear brake pads and calipers, also replaced the front media hub.

 

[Helmetface]

I got side swiped!

Both parties are A-Ok!

The damage was limited to my bumper, front quarter, that small panel beneath the headlight and the driver's front tire/wheel.



I'll be pushing for new bumper and panels. The tire seems okay, but the "off road" ring on the Duggers is definitely fubard. I'm not trying to take his insurance company for a ride, but I'll be damned if I end up with a half *** paint job on a nearly brand new truck.

 

[406Rebel]

amazing workmanship , as i understand no heating on this wheel ?

Correct. I don’t know if it’s just not possible or not but I know EZT and Carbontastic both don’t offer it.

 

[NorthernArea51]

I got side swiped!

Both parties are A-Ok!

The damage was limited to my bumper, front quarter, that small panel beneath the headlight and the driver's front tire/wheel.

View attachment 67027

I'll be pushing for new bumper and panels. The tire seems okay, but the "off road" ring on the Duggers is definitely fubard. I'm not trying to take his insurance company for a ride, but I'll be damned if I end up with a half *** paint job on a nearly brand new truck.

Dang...that blows. Glad everyone is ok though


Sent from my iPhone using Tapatalk

 

[zignice]

Something I learned today, the carpet on my Limited floor mats unbutton to be able to be removed. I was going to buy husky floor mats for winter as I knew the carpet would get wet from snow and mud. But now I can just remove the carpet portion and have a full rubber mat for the winter. SCORE

I would guess others already knew this but I just realized it today.

I actually use mine with the carpet in all winter with no issues. Take it out and hose the whole thing off, put it back. The black carpet hides the dirt well and I like the rubber mats better than the plastic fitted mats like Husky or weathertech.


Sent from my iPad using Tapatalk

 

[EugeneYYZ]

Added this little piece.

Sent from my iPhone using Tapatalk

Guys , after your truck update , please share the link of that items .
Cheers

Looks cool !!!

 

[peeceejay]

Added some WeatherTech mud guards. Super easy to install once I went out to buy an 8mm socket, which ended up being a whole new 140 piece socket set, just in case.

Most important for me was that I wanted something that was an easy, no drill install. These were it. Even managed to re-use the factory plugs on the fronts.

 

[4x4Rebel]

This item is unavailable | Etsy

Find the perfect handmade gift, vintage & on-trend clothes, unique jewelry, and more… lots more.

www.etsy.com

Guys , after your truck update , please share the link of that items .
Cheers

Looks cool !!!

Link for that little mod? Looks great. Looking for one like it with Limited on it.

Thanks.

 

[Skater]

This item is unavailable | Etsy

Find the perfect handmade gift, vintage & on-trend clothes, unique jewelry, and more… lots more.

www.etsy.com

Thanks.

 

[Mustangmike66]

Added Rebel Badges to doors.

Sent from my iPhone using Tapatalk

 

[PurpleRT]

That’s look amazing, I’m really surprised they don’t come stock like that seems like a no brainer.


Sent from my iPhone using Tapatalk Pro