What's new
By:
5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

What did you do to your Ram today???

I just did this exact mod as well. Subtle, but really nice touch. Looks great

Mustangmike66 said:
Added this little piece.
ee44a00c6f95a4722d48b17381b2993c.jpg



Sent from my iPhone using Tapatalk
Click to expand...
 
Got caught in a lighting storm at 2am last week while camping in the Roof Top Tent with the gf and our two dogs, had to move into the truck for safety, not being able to open the windows to circulate the air because of the heavy rain was not fun, learned my lesson and just finished installing the Mopar window Air Deflectors.

IMG_8776.jpg
 
I added stripes today. I've never had anything done like this before so I was unsure of the color I should go with. I really like the color in the shade, but in the sun - I don't know yet, only time will tell!
There are stripes on the roof but even standing on the other truck I couldn't get a decent picture
There should be stripes under the license plate frame, but we had a really hard time getting it off. I think there are some damaged screws. When it's not 500 degrees outside we will be putting the stripes down there too.
Also, the hood deflector looks weird on it now so I'm kind of sad about that :(
Sun1.jpgSun2.jpgSun3.jpgShade 1.jpgShade 2.jpgShade 3.jpgShade 4.jpgShade 5.jpg
 
Removed the front air dam and deployable dam to get a better angle of approach. Think it looks tons better without it. There is no additional road noise or turbulence on the front end without it. We shall see!
 

Attachments

  • 50642F2E-6796-4149-9E90-D507888E7F2E.jpeg
    50642F2E-6796-4149-9E90-D507888E7F2E.jpeg
    122.9 KB · Views: 241
  • 7C3A9426-1567-41C7-9D1E-53447625BA05.jpeg
    7C3A9426-1567-41C7-9D1E-53447625BA05.jpeg
    192.6 KB · Views: 240
Sherran said:
I added stripes today. I've never had anything done like this before so I was unsure of the color I should go with. I really like the color in the shade, but in the sun - I don't know yet, only time will tell!
There are stripes on the roof but even standing on the other truck I couldn't get a decent picture
There should be stripes under the license plate frame, but we had a really hard time getting it off. I think there are some damaged screws. When it's not 500 degrees outside we will be putting the stripes down there too.
Also, the hood deflector looks weird on it now so I'm kind of sad about that :(
View attachment 66941View attachment 66942View attachment 66943View attachment 66944View attachment 66945View attachment 66946View attachment 66947View attachment 66948
Click to expand...

I like it looks nice! How much did it run you?


Sent from my iPhone using Tapatalk
 
STR said:
I know it’s a pricy piece. How does it sound? Subtle, or a noticeable difference?
Click to expand...

It’s definitely pricey, I only got it cause I was able to get a great deal from someone on the forum on it, it was never installed so I figured worth a shot.
Keep in mind I don’t have the corsa catback, I have a B2 fabrications set up, but it all bolted up and fits fine as expected. Quality is awesome.
Best way to explain is it that it’s makes my current exhaust note a little bit clearer sounding, added a little bit more “gurgle” on idle, and slightly turned up the volume. In cab drone/noise isn’t any different than before from what I can tell, but again this will be different depending on which catback/muffler you have. Not sure if I’d spend the $220 for it brand new, but i am really happy I have it now, and I feel that my exhaust system is finally finished. I basically pieced together my own bolt on cat back lol


Sent from my iPhone using Tapatalk
 
Thewrangler73 said:
How much does that improve the sound?

Sent from my SM-G988U using Tapatalk
Click to expand...

Best way to explain is it that it’s makes my current exhaust note a little bit clearer sounding, added a little bit more “gurgle” on idle, and slightly turned up the volume. In cab drone/noise isn’t any different than before from what I can tell, but again this will be different depending on which catback/muffler you have. Not sure if I’d spend the $220 for it brand new, but i am really happy I have it now, and I feel that my exhaust system is finally finished. I basically pieced together my own bolt on cat back lol


Sent from my iPhone using Tapatalk
 
5thGenRebel_AMK said:
It’s definitely pricey, I only got it cause I was able to get a great deal from someone on the forum on it, it was never installed so I figured worth a shot.
Keep in mind I don’t have the corsa catback, I have a B2 fabrications set up, but it all bolted up and fits fine as expected. Quality is awesome.
Best way to explain is it that it’s makes my current exhaust note a little bit clearer sounding, added a little bit more “gurgle” on idle, and slightly turned up the volume. In cab drone/noise isn’t any different than before from what I can tell, but again this will be different depending on which catback/muffler you have. Not sure if I’d spend the $220 for it brand new, but i am really happy I have it now, and I feel that my exhaust system is finally finished. I basically pieced together my own bolt on cat back lol


Sent from my iPhone using Tapatalk
Click to expand...
I have the Borla S-Type system, and it sounds great, but was curiously if deleting the resonator would add any more volume without adding drone. Your description was helpful. Thx.
 
Skater said:
Finally installed my F-150 bed extender. Everyone has an opinion as to what bed extender is their favorite. For me, there is no other bed extender than the Ford factory extender that stows away when not needed and opens when needed. if you do not mind drilling a few holes in your bed, I highly recommend this upgrade. Ford makes two different sizes of these, one for older wider beds and one for the 2015-2019 new bed style. I do not know the width of the F-150 beds for 2020+; nevertheless, this one came off my 2015 F-150 Platinum.

I know Ram makes a pretty nifty bed extender/bed divider for beds with RamBoxes, but if you, like I, do not have RamBoxes, the F-150 factory extender is the cat's meow! :cool:

View attachment 66931View attachment 66932
Click to expand...

l like the idea of this...l have one of these laying around from my 2012 F-150 ... is this one the wrong size ... thx
 
Sherran said:
I added stripes today. I've never had anything done like this before so I was unsure of the color I should go with. I really like the color in the shade, but in the sun - I don't know yet, only time will tell!
There are stripes on the roof but even standing on the other truck I couldn't get a decent picture
There should be stripes under the license plate frame, but we had a really hard time getting it off. I think there are some damaged screws. When it's not 500 degrees outside we will be putting the stripes down there too.
Also, the hood deflector looks weird on it now so I'm kind of sad about that :(
View attachment 66941View attachment 66942View attachment 66943View attachment 66944View attachment 66945View attachment 66946View attachment 66947View attachment 66948
Click to expand...

looks good ... l like it ... silver stripes go well on black ...
 
Last edited:
Kob0583 said:
I like it looks nice! How much did it run you?


Sent from my iPhone using Tapatalk
Click to expand...

Was $425 for it all. The guy I went to was not the cheapest - I was quoted $300 from another guy but the one I went to was more responsive to my messages and took more of an interest in what I wanted. He is in the Austin/Buda, TX area - Nameless_Wraps
 
Hoping to pick it up.. took it in for media hub replacement and rear brake swap and it’ll be coming home with entirely new front and rear brakes after being in the shop since Thursday night.
 
Sherran said:
I added stripes today. I've never had anything done like this before so I was unsure of the color I should go with. I really like the color in the shade, but in the sun - I don't know yet, only time will tell!
There are stripes on the roof but even standing on the other truck I couldn't get a decent picture
There should be stripes under the license plate frame, but we had a really hard time getting it off. I think there are some damaged screws. When it's not 500 degrees outside we will be putting the stripes down there too.
Also, the hood deflector looks weird on it now so I'm kind of sad about that :(
View attachment 66941View attachment 66942View attachment 66943View attachment 66944View attachment 66945View attachment 66946View attachment 66947View attachment 66948
Click to expand...
It looks really good on your truck. This makes me wish mine wasn't a lease. I would love to add red stripes on mine. Is this a true silver, or is it a bit of a bronze gray? It looks good with our black wheels. I am curious what it would look like with the gray BTS wheels.
 
You must log in or register to reply here.

Users who are viewing this thread

  • ... and 1 more.
    • Total: 10 (members: 4, guests: 6)

    Site Vendors

    https://www.jasonlewisautomotive.com/

    Members online

    Total: 377 (members: 40, guests: 337)
    Back
    Top