How you do calibrate the throttle body?Some things to try:
1) Turn off Auto Start Stop
2) Calibrate the Throttle Body
3) Try a new Throttle Body ~ $200
How you do calibrate the throttle body?Some things to try:
1) Turn off Auto Start Stop
2) Calibrate the Throttle Body
3) Try a new Throttle Body ~ $200
It’s nice to have discussions with adults… who don’t feel the need to hurl insults, ridicule, etc.I did some searching, but haven't found anything concrete to support my claim. So I may be incorrect.
IKR! 😁It’s nice to have discussions with adults… who don’t feel the need to hurl insults, ridicule, etc.
Wrong or right, both won.
Kudos sir.
It is my understanding that the throttle body is calibrated by putting the ignition in RUN without starting the motor. After everything finishes booting, slowly depress the accelerator, hold at max for a second and then slowly release. If the intake snorkel is off, you can watch the throttle body valve respond.How you do calibrate the throttle body?
I have tried the recalibration with the gas pedal before, this is the first I am hearing about the forward collision warning system. I will give that a try in the morning. Thanks!I would also try turning off the Forward Collision Warning on vehicles experiencing severe hesitation on acceleration.
1) Turn off Auto Start Stop
2) Go to Uconnect->Safety/Driver->Forward Collision (Off)
3) Calibrate the Throttle Body
4) Try a new Throttle Body ~ $200
Try tow mode too. It’s like sport modeI have tried the recalibration with the gas pedal before, this is the first I am hearing about the forward collision warning system. I will give that a try in the morning. Thanks!