Rear Heated & Ventilated Seat Connectors

[brental1]

That setting should be programmed or not programmed. Mine is defaulted to not programmed


Sent from my iPhone using Tapatalk

I see that setting now. Changed it to Programmed; but still have only Left side switches working.

 

[brental1]

Well that is progress


Sent from my iPhone using Tapatalk

For sure. I feel somewhat optimistic since the controller is in the left side seat and at least it's communicating with the right side. I'll trace the console harness tomorrow. Can't imagine it doesn't split A207 and LIN BUS to both switches.

Incidentally, there's another circuit in XY360A that's not populated. Pin 13, A195, RD/YE, Fused B+. I wonder what that's for?

 

[billfraley]

A195 is Fuse 42, here is what I found for fuse 42:

42A&B

10A

Mod Transfer Case Switch Module (TCSM) / SBW / Electric Park Brake SW / Module TPM Trailer / Module Gateway Can-C Trailer TPM / Seat LT & RT Vent

 

[billfraley]

A195 is Pin 25 in:
ASSEMBLY-POWER DISTRIBUTION CENTER-INTERIOR C1

Where is this connector located?

​