Practical upgrades

[CHeYeNNe71]

I'm doing the same set up with the BDS 3" and CORE4X4 rear kit. Went with the adjustable trackbar and also grabbed the trackbar bracket from the 2" Mopar Lift Kit. This way I'm covered no matter what.

Total Brainfart before coffee and posting Yes they make the bracket for the 5th Gen. I looked for the bump stop extenders online and nobody has available.

 

[Redz72]

I'm doing the same set up with the BDS 3" and CORE4X4 rear kit. Went with the adjustable trackbar and also grabbed the trackbar bracket from the 2" Mopar Lift Kit. This way I'm covered no matter what.

Can you get just the Mopar bracket by itself? If so, do you have the product #? Or any suggestions how to acquire one. lol.

 

[CHeYeNNe71]

You'll need the bracket, spacer and hardware. I looked on the Mopar Lift Kit installation online you can get.

Bottom of page

2019-2024 Ram 1500 2-Inch Lift Kit 77072424AE | Mopar eStore

2019-2024 Ram 1500 2-Inch Lift Kit 77072424AE

store.mopar.com

 

[User_26887]

Hauled about 1,100-1200 lbs, so prob 1,500-1700 with me and the random stuff in the cab.

I have Timbren rear SES installed with one inch spacers but the springs kept kept them from contacting. Starting rear height was at 40.5 which sat right at 39” or 1.5 inches of sag. Not bad but I bet that much tongue weight will the Timbrens in full contact.

I plan on adding the other 1/2” spacer and I’ll be done with it. Other than still chasing a front sway bar/end link clunk everything is good.