Official Built to Serve Thread

[Stillhetfield]

Thanks for the response. I guess that's the same setup you have. I was wondering how much rake the truck would have.

 

[Grape_Ape]

You should have about a half inch if I'm thinking about it right. Maybe a little more. I'm at 2.8" up front and just the regular ORP springs in the rear for 1" and I think I'm at a half inch. So you may be closer to 3/4 of an inch.

 

[HEMITKN]

Beautiful truck!!!

I have a 2020 Ram 1500 BTS with off-road group which means my coils front and back are 1" longer. If I use rough country 3.5 lift with lifted N3 struts front and I think it comes with 1" rear spacer lift?

So am I correct in saying that the front springs will be replaced with your N3 lifted strut at 3.5 front. The off-road group spring will stay in the rear plus your 1" spacer which will give me 2" in the rear of total lift with off-road spring. So essentially I would have 3.5 front and 2" rear. Is this correct? Thank you

Have tha same lift and yes
I have the RC 3 1/2 lift with coils and its a half an inch max.

 

[Stillhetfield]

You should have about a half inch if I'm thinking about it right. Maybe a little more. I'm at 2.8" up front and just the regular ORP springs in the rear for 1" and I think I'm at a half inch. So you may be closer to 3/4 of an inch.

Okay that's about what I thought then thanks for the help.

 

[Stillhetfield]

Have tha same lift and yes
I have the RC 3 1/2 lift with coils and its a half an inch max.

Thanks for all the help I appreciate it. I actually wish they had a 2" for the rear but I guess you can only get a 1" with that lift anyhow.

 

[HEMITKN]

Thanks for all the help I appreciate it. I actually wish they had a 2" for the rear but I guess you can only get a 1" with that lift anyhow.

Dealer did mine at purchase and we did talk about slightly longer springs don't remember the company though. I am quite happy with the level stance, just didn't want the "Cali rake" nose high. Which happens if you don't have the OR springs I was told.

 

[Flamma]

Need more pics of the whole truck with shell please ;-)

There ya go brother

 

[HEMITKN]

There ya go brother

Thanks brother but, that sure as hell isn't VA my friend ;-) Luv the west, we looked at land in NM a few years back but, didn't pull the trigger mistake IMO
Thanks again, may do a camper shell in the future as well.

 

[GonzoNerd]

I installed a little anti bling today. Put on the AJT shift knob and volume covers. They are spendy but look pretty damn good.

 

[BigAdge]

Anyone gotten an offer in a parking lot to buy your truck? First time for me!

 

[HSKR R/T]

Not my current Ram, but I have for other vehicles I have owned.

 

[BigAdge]

Not my current Ram, but I have for other vehicles I have owned.

Do you have a current pic wit all the tint? I'm thinking of tinting front windows and windshield. Any visual impediment at night?

 

[HSKR R/T]

Do you have a current pic wit all the tint? I'm thinking of tinting front windows and windshield. Any visual impediment at night?

35% on windshield, 20% film on all other windows, making the factory tinted windows 5% total. No issues at night with the factory LED headlights.

 

[Jhall]

Anyone gotten an offer in a parking lot to buy your truck? First time for me!

Send them my way I have one for sale lol

 

[BigAdge]

Send them my way I have one for sale lol

Sent you a message - where are you located?

 

[Jhall]

Sent you a message - where are you located?

Oklahoma

 

[Master_Angler]

Some one posted these vinyls decals a couple weeks ago. Mine came in today. I was nervous about the greys match. I guess I’ll wait and see once they fully adhere. Nice BTS touch I thought tho

How hard was it to apply the decals? I bought some but am nervous of ruining the decals.
Any tips?

 

[bud007]

How hard was it to apply the decals? I bought some but am nervous of ruining the decals.
Any tips?

master angler
all the decals that i have applied i use a soapy solution ( just like when you apply PPF) to move the decal in the location you want and then dry up the excess with a paper towel and then let it dry in place . also works good when applying those little registration tags to your license plate
good luck

 

[Rjshoaff1]

How hard was it to apply the decals? I bought some but am nervous of ruining the decals.
Any tips?

Definitely clean the area with alcohol first and let it dry. Then you use soapy water on the area and the vinyl to move it into place. I then used a hairdryer and a credit card to smooth out any bubbles. Make sure you smooth the bubbles out gently to start. There are also some good videos on YouTube. Just take your time and it should be good.

 

[HEMITKN]

Ditto with the guys above ;-)