moosem
Ram Guru
Why the hell doesn’t it just come with these???
Definitely looks better with the liners IMHO
I guess. But how much of a difference is it compared to the two pieces that it replaces? If the MRSP went from $50,000 to $50,100 would anybody care?COST!
I guess. But how much of a difference is it compared to the two pieces that it replaces? If the MRSP went from $50,000 to $50,100 would anybody care?
This is crazy 50K vehicle and missing screws! I just purchased my 2019 Ram 1500 Laramie 8 days ago and was washing it today and realize I'm missing 3 liner screws on the driver rear. I'm sure your part number will work for me as well?My truck was delivered missing the wheel well liner screws on the right rear. The dealer didn't have them in stock and had to order. This is what I recieved and installed myself. Problem solved.
You will need 8 extra screws for your Big Horn.Are the two additional screws only for trims with the fender flares? I have the big horn that does not have fender flares, and I am trying to figure out if I need the two extra screws.
Thanks!
You will need 8 extra screws for your Big Horn.
Only 2 extra screws are required if your truck has OEM fender flares.
Yes I’m sure and you don’t need to drill any holes!Are you sure? I hate to question someone who has obviously done this, so I apologize. But I will be drilling holes if my truck if I need to make room for 6 more screws than everyone else.
Neither here nor there, I will start with the two, and see if I can reuse the ones that are already there. I will keep my fingers crossed the existing ones are the same.
Know the part number of those clips?I didn’t buy anything other than the liner itself. Take the stock clips off the liners and reuse them on any hole the full liners have left- do this and you can use all factory hardware without buying anything extra.
Also- mine came with the fender flares factory. There are three or four clips you have to remove from the truck after you disassemble the factory liners. I’m pretty sure it’s the ones on the photo that I put arrows on.
One more tip- whenever you pull the factory partial liners off make sure to put the clips you take off on the new full liners first. DO NOT try to install without doing that first. It’s a pain if you do. I know this by trial and error....more error on the first