I have a 2024 ram 1500 that came with halogen headlights. I ordered the factory OEM LED headlights from INFOTAINMENT. I got everything installed including the wiring harness etc. everything works but when I have the DRL setting on in the system settings the DRLs and the low beams come on. Is this something I need to change in programming? I know the DRLs on the halogens were the low beams. Could that programming cause the LED DRLs and low beams to come on during the day? If I turn the DRL setting off no lights are on during the day.
However, when I remote start the truck the DRLs come on without the low beams as they are supposed to.
Also, I want to make sure I have the fuse placement for the DRLs correct. At first after watching infotainment video they said tap the DRL harness at fuse 35, when I did this it locked out the radio. I then watched a headlight revolution video and they said tap at fuse 38 and that worked other than the issues described above.
The DRL harness has a 15 amp fuse in it but has a 2nd fuse slot too, should I put the 10a I took out in that? Also is fuse 38 the correct place to tap?
Any advice is appreciated.
However, when I remote start the truck the DRLs come on without the low beams as they are supposed to.
Also, I want to make sure I have the fuse placement for the DRLs correct. At first after watching infotainment video they said tap the DRL harness at fuse 35, when I did this it locked out the radio. I then watched a headlight revolution video and they said tap at fuse 38 and that worked other than the issues described above.
The DRL harness has a 15 amp fuse in it but has a 2nd fuse slot too, should I put the 10a I took out in that? Also is fuse 38 the correct place to tap?
Any advice is appreciated.