Handgun Mount

[Gman]

I had this holster made for me with a RAM mount attached to it and then bought the rest of the RAM mounts I needed to run the seat bolt through it and attached everything. this was in my 17, but I am planning to add it to my 19 shortly

Nice Walther. I have the 'Classic' version.

 

[Gman]

I have switched to crossdraw holsters due to shoulder injury. Makes drawing from a seated position much easier than from your strong side.

Ouch. Hope you heal up soon!

 

[TNSmokee]

I use the gum creek steering wheel mount. It's pretty universal in design and does not harm the finish. It has been in my F-150 and Challenger and now in the RAM. You just need to make sure you get the opposite hand holster for it. The way it mounts makes it backwards. I have a P365 and the position is perfect.

Vehicle Handgun Mount

Quick and accessible, our universal steering wheel Vehicle Holster Mount is ideal for carrying a handgun in your vehicle. No tools required and no modifications to vehicles.

www.gumcreekcustoms.com

 

[18Cummins]

Anyone have a good handgun mount they use in their truck?

Share links if possible.


Sent from my iPhone using Tapatalk

Here’s what I did with my XDS. I re used the Velcro straps that came with the pistol and just mount it on the side of my console.

 

[TSheff]

I'm just a simple man. These descriptions are great, but you know what they say about pictures.
I carry a Glock22 OWB RH. Just got the truck so I haven't spent time checking best spot yet, really figured some of you had done it so I didn't need to experiment. Obviously want somewhat secure, with quick easy access.

 

[Barnyard]

Here's mine under the drivers seat. Just made a "T" out of flatbar, bent it to fit, and bolted a paddle holster to it. There was an existing hole in the seat frame that it's bolted to with a bolt and nylon nut. Secure, and out of sight.

 

[Ram1500OwnerMaybe]

Like this:

View attachment 11906

If you get stopped and it is seen, would that fall under "open carry" and be a potential issue in states where open carry is not legal?

 

[Ram1500OwnerMaybe]

For the magnet, how hard of a bump or what ever would be required to knock if off?
The location makes it a bad spot to drop and a round go off.

 

[Neurobit]

For the magnet, how hard of a bump or what ever would be required to knock if off?
The location makes it a bad spot to drop and a round go off.

@Ram1500OwnerMaybe
Very, very, unlikely this would ever happen with any modern handgun, specially in a carpeted vehicle from the height of a few inches.
Even on a ****ed and locked 1911.

Most ADs / NDs happen by putting a finger on the trigger and going boom.

 

[Roguerob]

I use a LH JM4 leather holster for my G21 and clip it in the map pocket by my right knee. I can quickly take the whole rig out and tuck it in the small of my back if I need to carry it around.
Here's the link for the holsters

Homepage - JM4 Tactical Holsters

Great gun holster. Once you buy one, you’ll want one for every gun you own! Eric H This is the cadillac of the gun holster MAtthew Marusterconcealcarry.com Previous Next What’s Your Gun Holster Type Whether you are looking for a high quality traditional gun holster that is gentle on your...

jm4tactical.com

 

[TSheff]

Thanks Guys. I ordered a soft IWB that could clip to the Map Pocket as some suggested. I'll use it for now.
I also oredered a set of Magnets, I'm going to mount 1 in my Jeep and see how I like it. If it works well. I'll mount the other on the Map Pocket ot the RAM.
I'm in TX so not afraid LEO will see it and don't make a habit of travelling to lesser states (those that don't recognize a Citizens RIGHT to bear ARMS).

 

[Stevenc150]

I keep my CC on me at all times IWB. So for peeps that have a dedicated truck gun like I do, theres a few "console-safe" options out there that take advantage of the lower console "depression"...

[Lock'r Down console safe]
[Tuffy console safe insert]

Personally my full size 9 sits in an open softcase in the depression like a glove

 

[Smerberj]

I really need to get one of these safes, my Glock 17 sitting in my center console isn't doing it for me.

 

[Wakesnowb]

Would love to see a safe option to put in the floor storage area under the center bench seat for those of us with the bench seat.

 

[Reverse]

Would love to see a safe option to put in the floor storage area under the center bench seat for those of us with the bench seat.

I have one one in my 4th gen from consolevault, works great. Don't see one for 5th gen on their site, but 4th gen might fit?

 

[RumRam]

I have one one in my 4th gen from consolevault, works great. Don't see one for 5th gen on their site, but 4th gen might fit?

View attachment 58249

I just purchased one from Consolevault for my Gen 5 Ram. There are 3 options: key lock, 3 combo or 4 combo lock. This is my second one bought from them. Still have safe that I had for my 2018 ram 1500 that I traded if anyone is interested!

 

[Bluesurf]

I bought this last year and have not installed it, I won't use the stick tape. I will use 4 zips. The mag is so powerful and its not very large. I bought this on Dealnews.com for ~$16.00

Here is a better price..... https://www.ebay.com/itm/RONIN-FACT...293669444408?_trksid=p2385738.m4383.l4275.c10

 

[TNSmokee]

I didn't want to drill holes either so I use this one: http://www.gumcreekcustoms.com/Vehicle-Handgun-Mount-p8.html
With this holster: https://aliengearholsters.com/sig-p365-alien-gear-cloak-slide-owb-holster-outside-the-waistband.html

You have to get the left handed holster if you are right handed. I've been using this setup for years and have transferred it to different vehicles as I traded. I can take a picture when I get home this afternoon if you need one.

 

[Didyoma]

I had this holster made for me with a RAM mount attached to it and then bought the rest of the RAM mounts I needed to run the seat bolt through it and attached everything. this was in my 17, but I am planning to add it to my 19 shortly

How did this work out in your 19?

 

[scottmoyer]

I saw a post earlier where a person asked about the gun falling off the magnet and firing. This is concerning to me that people either think this CAN happen, or they carry a gun capable of discharging from a slight fall. This should not happen, EVER. If your gun is that unsafe, I would consider looking into a different option.

Me thinks the movies have given people ideas that guns are this sensitive and can fire just by looking at them.