Alter Ego Trip
Active Member
- Joined
- Aug 23, 2020
- Messages
- 178
- Reaction score
- 173
Interior mostly buttoned back up. Last pieces left are tweeter pods and sub/amp enclosure. I was leaning ported, but even with the seat lift I'm not going to have enough airspace with the amps getting mounted under the seat as well. I have enough to spare with sealed, so that's the direction it looks like I'll end up going.
Cut access hole in the center console bin for topping d10. This runs up and out to my A-tach mount. I also cut a hole for feeding Helix director wire up. I am building custom insert to go into my SKT bin that will house the conductor. I also cut access hole that goes from power point in top of radio storage to A-tach mount.
Cut access hole in the center console bin for topping d10. This runs up and out to my A-tach mount. I also cut a hole for feeding Helix director wire up. I am building custom insert to go into my SKT bin that will house the conductor. I also cut access hole that goes from power point in top of radio storage to A-tach mount.