5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Engine stalled / shut off

My 2023 Rebel has done this twice in the last month. The first time, I was pulling up to a yield sign at an intersection. Yesterday in happened again, doing about 5mph. The first time it started right up, but yesterday...... I was halfway through a gated entrance at a business, so I was completely blocking the entry. Took almost 5 minutes before it would restart, and only did when I started mashing the accelerator, much like and old carb'd vehicle. Threw a P032F - combustion engine producing insufficient torque, and a P0300 Multiple cylinder misfire. Dealer can't get it in for another 9 days.
 
Stall situation happened on my 2019 Laramie with e torque. Truck was warmed up, had just dropped off materials at a job site. I was taking a right turn from an intersection at about 10 to 15 mph and pressed the gas to find no power, dash lit up, said shift to park. Tried to restart it several times it just cranked with no start. Called triple a and while I waited, pulled the negative battery cable, and reconnected after about 5 minutes. It would crank and briefly run then die. Towed it to the dealer who called 2 hours later saying it was starting and running fine, am I sure I want them to run the 200 diagnosis. From reading through this thread it seems to be an intermittent problem dealers can't figure out.
 

Users who are viewing this thread

Back
Top