Do rebels have the extra 1 inch of lift from the factory?You have two options: 1) replace the upper control arm with a longer arm, 2) get cambered alignment bolts for the lower control arms.
I tried my hardest to get stock length upper control arms to work, and the two issues I encountered were at full droop the arm contacts the spring and I ran out of adjustment to set camber.
Personally, I’d go the control arm route over ez-camber bolts, and everything I mention here applies to your Rebel.
Gotcha. I would say go for the UCAs if it has ORP, which it does. Otherwise a non ORP would be ok if you’re not off roading. Which is pretty much my truck, except I have top hat spacers instead of leveling struts.Yes the have the extra one inch. Rebels were the original truck with the orp. You do not need uca's if you can get a good alignment which you should be able to do. The problem is that if you can't you have to tear it all apart again. It may also limit your travel and that could be a problem when offroading.. Big decisions.
You should be fine then.Gotcha. I would say go for the UCAs if it has ORP, which it does. Otherwise a non ORP would be ok if you’re not off roading. Which is pretty much my truck, except I have top hat spacers instead of leveling struts.
I’m good with what I have. Hopefully we helped the OP with his decisionYou should be fine then.
im struggling, whats ORP?Does your truck have ORP?
Off Road Package.im struggling, whats ORP?
Oh. Yeah. Was drawing a blank. Thank yaOff Road Package.
^^^This is what's up.If you dont have ORP you can do a 2 inch level without replacing UCA's no problem, unless you're hard core off roading.
Rebels will probably need UCA since it has ORP.
You're good to go as long as you can maintain a decent alignment. If you are pushing the suspension stroke you could tear up your CV joints. But if you're not then you will be fine.Hi fellas, new member here and first post. Got a question, I recently installed a 2 inch level. My truck isnt the ORP. Wanting to keep as much OEM parts as possible. Wondering if the Mopar ORP upper control arms would work ok for the 2 inch level? Sorry in advance if this has been covered.
A better option for everyone is using the Mopar lift kit upper control arms.Hi fellas, new member here and first post. Got a question, I recently installed a 2 inch level. My truck isnt the ORP. Wanting to keep as much OEM parts as possible. Wondering if the Mopar ORP upper control arms would work ok for the 2 inch level? Sorry in advance if this has been covered.
Yup that's the ones I'm looking at. The mopar UCA's for their 2 inch lift kit. Appreciate it guysA better option for everyone is using the Mopar lift kit upper control arms.