5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

DIY led oem swap Front and rear

Ziggyrz07

Member
Joined
Dec 17, 2019
Messages
24
Reaction score
35
Location
Wisconsin
I went on eBay and waited to find quality prices for the tail lights and head lights I think I’m 1100 in the set. Then 170 to retro shop for the adapters for the front head lights.

Front swap can be done in 1-2 hours and rear in 20 minutes or so.

to remove front fascia you’ll want to use something like a carpenter’s pencil to separate the facia from the fender before pulling it apart.


Installing OEM LEDs in a 19 Ram DT


Installing OEM LEDs into 19 RAM 1500 DT
 

Alexxmackk

Active Member
Joined
Oct 13, 2019
Messages
34
Reaction score
5
I went on eBay and waited to find quality prices for the tail lights and head lights I think I’m 1100 in the set. Then 170 to retro shop for the adapters for the front head lights.

Front swap can be done in 1-2 hours and rear in 20 minutes or so.

to remove front fascia you’ll want to use something like a carpenter’s pencil to separate the facia from the fender before pulling it apart.


Installing OEM LEDs in a 19 Ram DT


Installing OEM LEDs into 19 RAM 1500 DT

Nice it looks great. Where did you go to find the leds ? I have a bighorn as well


Sent from my iPhone using Tapatalk
 

Ziggyrz07

Member
Joined
Dec 17, 2019
Messages
24
Reaction score
35
Location
Wisconsin
Nice work! Im looking to do this for my tail lights, I noticed the rebel tail lights dont have the "Bar" led like yours.. when you have a moment can you send the model # please so I make sure to not order the wrong ones.
Sure is it on the tail light somewhere? I got a set off eBay from another big horn
 

Users who are viewing this thread

Top