That's ok I really don't like the chrome. I removed all the other chrome already. So the back ones would have to be different since there is no button right? I'd like to find the PN for both with chrome and without then and decide from there.
Thanks for all the hard work you have done.
His Are bright white thoughI'll take the chrome!!
it is a 19, correct?
Alfaobd worked on the 4th gens. If your 19HD has the same bcm & rfh as a 4th gen, I don’t see why it wouldn’t work.
Here’s the link for a 4th gen
How To: Add Factory Keyless Enter N Go
Here’s a write up on how to add factory keyless enter n go (push button start) for anyone that wants to do this. My goal was to do this without a dealer visit and entirely with the alfaOBD software, but initially it wasn’t capable of programming the new fob and RF Hub replace. After some back...www.ramforum.com
Does your 19HD still use the 4th key from
Continental ? Or the 5th gen key from Strattec?
His Are bright white though
The painted ones are actually cheaper... you can get a set online for about $200 for all of them.Rons5thgwn, I am just trying to get rid of the chrome inlay in the door handles and swap them out for painted one.
The painted ones are actually cheaper... you can get a set online for about $200 for all of them.
1500s have a completely different front fascia than 2500s and 3500s....My question to you is, does your front grill look like mine, im looking for someone to swap my paint for chrome. I think the 1500s have a different grill layout.
And I wish my truck came with painted bumpers... imo it looks way better than the chrome ones...My question to you is, does your front grill look like mine, im looking for someone to swap my paint for chrome. I think the 1500s have a different grill layout.
I like chrome, wish l could find someone to trade with.
Awesome!!!!Hi all!
I saw your thread and thought I would post some information I have found. I am a part of the Jeep JL forum and have been researching how to add passive entry. Since the Uconnect systems are pretty similar on Ram and Jeep, I figure this information will be somewhat relevant. I have used the Jscan app, to program my vehicle for passive entry. The setting shows up, as shown in the picture, but does not stay selected, so that was a dead end.
Jeep has announced they are doing a livestream event with the head of Jeep, engineers, and other higher-ups. They asked for questions, and I stated how FCA should create a dealer added package for passive entry, or allow owners some way to add it. The live stream is April 24th, and hopefully I will receive an answer as to whether they would do it or not.
I will keep you posted as to their response and to whether it would happen or not.
Thanks.
Hi all!
I saw your thread and thought I would post some information I have found. I am a part of the Jeep JL forum and have been researching how to add passive entry. Since the Uconnect systems are pretty similar on Ram and Jeep, I figure this information will be somewhat relevant. I have used the Jscan app, to program my vehicle for passive entry. The setting shows up, as shown in the picture, but does not stay selected, so that was a dead end.
Jeep has announced they are doing a livestream event with the head of Jeep, engineers, and other higher-ups. They asked for questions, and I stated how FCA should create a dealer added package for passive entry, or allow owners some way to add it. The live stream is April 24th, and hopefully I will receive an answer as to whether they would do it or not.
I will keep you posted as to their response and to whether it would happen or not.
Thanks.