Adding Passive Entry: How-to

[sammy*2]

Hi Jimmy, I have a 21 Bighorn. Are you still making the wire set?

 

[J-barcarp]

I have finally finished my doors and three work but the forth one wont.
the driver rear wont function as passive, and it also wont lock or unlock when it is open, neither from the remote or door switches. But if it is closed it will respond to remote and door switch commands….
i switched the handles and caps with doors that work and no change…
i have unhooked all the new wiring and no change….

what is happening here?

Tried a new door actuator and still no response to the switches or the remote!
it has do be something with the wire taps or the way i tapped them. I need to get my buddy over to show me how to test the wires….

 

[sammy*2]

What are the part numbers for
2021 Rear Fascia Connector Terminals:
2021 Rear Fascia Connector Wire Seals :

I was looking for the same, Has anyone done this on a 2021?

 

[vincentw56]

I was looking for the same, Has anyone done this on a 2021?

Many people have.

 

[sammy*2]

Many people have.

I guess a better question would have been, Can someone who has done this on a 21 Ram verify the part #'s for the rear fascia connector? The Te Connectivity 1241380-1 terminal connector looks different than the one posted in the pictures for the 21"s

 

[zstroken]

So I am working on mine and the harness from Jimmy07 for the drivers side is labeled 17D and 11C, this is for a 2023 big horn eco. The photos here indicated different numbers. Which is correct?