8.4" to 12.1" screen replacement

[theRamguy]

hey, i need View attachment 195629 this volume knob, with the black part, anyone maybe knows the part number for it?

I've got one hanging around. Send me a dm and I can get it sent over. There is no part number for this sadly.

 

[rayman77]

Hello guys, I have installed everything, but I got a black screen, and the ac is blowing hot air and I can't control it, please help.

 

[Ddecarlo314]

Ok guys I’m kind of stumped. I did the swap on my 2019 ram. I have just a black screen. Nothing shows up or works. I have pulled the fuse, pulled the battery plug and checked my plug that I repinned to work. I used the Jscan app today and I plan to utilize our Matco tool tomorrow at work. I have a couple code that won’t clear and I was hoping for maybe some direction on trouble shooting. Thank you

@Jimmy07

 

[Duongs]

No programming is needed for the radio module itself but the BCM of the vehicle will need programming to "know" there is a different radio installed.

So a module swap (from bad module to good) will require programming? If so, how in alphaobd?

 

[FredRam19]

I have been working on this up grade since February. Got everything installed alpha by passed and all was good for about two week. Screen randomly stoped working going black and glitching back to the screen but nothing worked to touch other than outside buttons. Then a message popped up device not acceptable. So I changed the media hub. Again all worked fine for two week and back to the glitching black to frozen screen. Any ideas?