myfast3rdgen
Active Member
Thanks for the helps guys! That's what I figured but just wanted to make sure.
Howdy! Looking for torque specs for all three components drain and fill plugs. Did you use a torque wrench or go by feel? I’ve found online at Blauparts:Yep, just did mine last week, diffs and transfer case. The rear diff is 8mm hex fill and 14mm hex drain.
Thank you, did you also apply thread sealant or just clean up the threads and install?Used the same spec as listed above when I did mine a month ago in the driveway.
Red RTV on the threads…Thank you, did you also apply thread sealant or just clean up the threads and install?
Used a torque wrench, and RTV on the threads.Howdy! Looking for torque specs for all three components drain and fill plugs. Did you use a torque wrench or go by feel? I’ve found online at Blauparts:
Front diff: fill 25 ft/lbs, drain 25 ft/lbs
Transfer case: fill 15, drain 15
Rear diff: fill 18, drain 44
Have not found any Ram tech data online just what Blauparts say on there website