5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Recent content by Dyne

  1. Dyne

    5th Gen Ram 1500 30" Light Bar Bracket Set

    The active grille shutters can be removed without codes or cel coming on as long as you leave just the motor connected and zip tied up out of the way. That’s what I had to do. Then you have plenty of room to add behind the grille. Also there’s a company called Dark dune that makes a bracket that...
  2. Dyne

    5th Gen Ram 1500 30" Light Bar Bracket Set

    Sorry but nothing is hooked up yet. Was working on brackets first just to see if things would work out first. Since it’s at powder coat I’m gonna start running wires and solid state relays to run everything thing on. Project is moving a little slow since 2 kids in school with activities and I...
  3. Dyne

    5th Gen Ram 1500 30" Light Bar Bracket Set

    So here’s something extra that I’ve been working on for the past months instead of installing my brackets from shifts and grins. Complete from idea to measurements to fabricating/milling/bending my own materials to get this to work. Parts are off to powder coating right now and then I’ll do...
  4. Dyne

    5th Gen Ram 1500 30" Light Bar Bracket Set

    My 30” curved dual row from rough country is 32.2” total length and fit fine with extra wiggle room to go bigger. Yours should fit.
  5. Dyne

    5th Gen Ram 1500 30" Light Bar Bracket Set

    Here’s mine set up on switches. Switch bank set up in the sunglasses holder location with rocker switches.
  6. Dyne

    5th Gen Ram 1500 30" Light Bar Bracket Set

    I just recently installed a 30” rough country dual row curved with their version 3 brackets on a 2020 Bighorn with the air dam brackets. It fits just fine. Only issue I ran into was the light didn’t sit center vertically in the slot. It’s a little low. Guessing the bighorns sit higher than the...
  7. Dyne

    Active Grill Shutter Removal

    I recently removed mine on a 2020 1500 big horn bts and was prepared to fabricate a bracket to trick the motor. When I got into the motor for the ags is completely different than the earlier versions. No arm to trick or check positioning. It’s a straight through hole that the shutters go into...
  8. Dyne

    Water Fowler 41 30" Light Bar Brackets

    I would love measurements please. That would help me to determine what brand and kind of bar that will work. Do these bolt up to an existing place on the frame or will I need to drill holes? Also just curious about the “gear” looking cutout, is this for a reason or just something you do on all...
  9. Dyne

    Water Fowler 41 30" Light Bar Brackets

    Is this for a 30” straight or curved bar? Will they fit any brand 30” dual row bars or single row?
  10. Dyne

    The Raptor Has A Cool Aux Switch Bank - So Can The RAM!

    #6-32 x 1 3/4” hex flat head. And I just did a dry sand after filler primer. Just enough to smooth it out.
  11. Dyne

    The Raptor Has A Cool Aux Switch Bank - So Can The RAM!

    @Malodave Love it. Looks great. Sanded mine down till baby smooth with 500, 1200, then 1500 wet sand. Sprayed with 2 coats filler primer and sanded again with 500. Then 2 coats satin black and 2 coats matte clear. Looks just like factory. Got a socket flat head bolt in black oxide finish...
  12. Dyne

    Santa’s New Sleigh

    Hey so I was looking at getting this done too. I’ve been looking for new seal kits but Chrysler says they don’t make them and can’t really find them. Do you remember if he reused the old seals for the calipers or bought new ones? If he used new ones do you know or find out what kit he used? Thanks
  13. Dyne

    The Raptor Has A Cool Aux Switch Bank - So Can The RAM!

    https://www.otrattw.net/. These people make some nice rocker switches. Multiple styles, designs, and led colors.
  14. Dyne

    The Raptor Has A Cool Aux Switch Bank - So Can The RAM!

    Thanks Malodave. Got mine in Thursday. Was surprised how sturdy and heavy it was. Great job. Will update once I get things done. Still planning things and getting things ready. Still need to buy 3 led bars for the front, get somethings powdercoated, and do the grille active shutter delete to...
  15. Dyne

    The Raptor Has A Cool Aux Switch Bank - So Can The RAM!

    No worries man, don’t worry about it. I know nothing about printing and constraints of the machines. Just thought I’d ask and get an opinion. I like your design a lot too. I don’t have a need for the sunglasses area. I also didn’t realize how much easier it was to reach than up in the middle of...
Top