Recent content by DusterJoe

I did find your video's and they helped greatly. Thank you, DusterJoe

Oh that is nice! This a direct swap? DusterJoe

Looking for some help or details on how to pop the pins on the fog light harnesses when swapping from Halogen to LED. Thanks, DusterJoe

Those are nice, but they're halogen headlights still. Listing says the low beam is H7 and high beam is H1. So while these likely do perform they are not an LED headlight assembly like the VLand's.

For those with the hyper flash issue do you have the side marker harness unplugged as per VLand's instructions? If so this is likely where the BCM thinks that a bulb is out. Might be possible to have a harness made with a small 126 bulb inside the fender and see is that fixes the issue...

Replace the wheels or take the cladding off and powdercoat/paint. DusterJoe

It's all painted. Grill is factory painted, the valance, I painted with color matched paint. DusterJoe

Decided that my big horn had too much chrome so I did some color matching. Did the mirror caps, grill and valance between the hood and grill. Next up, install my level and get some bigger tires to go onto my 22” wheels. Unless led headlights come up for a good price. DusterJoe

Just bumping this once again. Order the Mopar 2" lift control arms. Debating the Rough Country 2" strut/spring combo or the Bilstein B8 5100... I already have Rough Country N3 rear struts from a used 3.5" kit I bought. The struts are new as are the ball joints in the 3.5" control arms...

I just ordered the 2" lift kit control arms online via the local dealer. The dealer just called me and told me these do not fit my 2022 Big Horn non-air suspension. Told them to order the control arms for me anyway. I ordered 68323530AA and 68323531AA Is there something I'm missing that...

This is correct. I only need 1.5" rear lift. I have found some rear spring spacers that are 2". I already have the lift struts from RC. I might just go with the plates for now change it up if I can't get the helper bags to work with the spacer plate. DusterJoe

So if I have a 3.5" RC lit kit and I using the RC 3.5 strut/spring combo and want to lift the rear. Instead of using the spacer plate cause I want to use helped bags what do you all suggest? Thanks, DusterJoe

Wish I had these options here in Canada. Called last week and they want $280 a year for the services. Asked what that included and was told only remote start, remote lock/unlock and vehicle health via the app. Hard to justify that when I spent so much on the truck already. DusterJoe

Ahh I’m up in Detroit area. DusterJoe

If your close I'd be willing to swap you the parts. I have the Halogen setup and want LEDs. DusterJoe