CHeYeNNe71
Spends too much time on here
I've ran one on my Grand Cherokee 3.6 for the last 3 years. Makes the vehicle better to drive I think.
5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
What did you do to your Ram today???
- Thread starter 19BlkRam
- Start date
Yes just now literally exactly what u just described. Did you ever get an answer?Woke up to my 2020 1500 dead jumped it for thirty seconds and it started right up now the check engine light is on and it’s throwing a U1267 codetook it to have the battery checked said battery/starter/alternator were all good and working fine so I brought it to the dealership they said no clue we will check it so now we wait. Anyone else have this ?
Sent from my iPhone using Tapatalk
took it to have the battery checked said battery/starter/alternator were all good and working fine so I brought it to the dealership they said no clue we will check it so now we wait. Anyone else have this ?What did you do about the u1267 check engine code?
Cleared it.
Biggiehorn
Ram Guru
Added some chase lights. Or should I say, a state of the art tailgater deterrent system? 
Lights are Strands Siberia RP’s. They have the option to run either an amber or red DRL similar to how my A pillar lights have the amber or white DRL.
Brackets are a universal style chase light bracket made by GODZ MFG. These brackets have two mounting points per side and the design allows for both a light and antenna to be mounted if desired. I mainly went with these because they work with most tonneau covers on the market.
Lights are Strands Siberia RP’s. They have the option to run either an amber or red DRL similar to how my A pillar lights have the amber or white DRL.
Brackets are a universal style chase light bracket made by GODZ MFG. These brackets have two mounting points per side and the design allows for both a light and antenna to be mounted if desired. I mainly went with these because they work with most tonneau covers on the market.
raygun9
Well-Known Member
- Joined
- Oct 23, 2022
- Messages
- 342
- Reaction score
- 182
- Points
- 43
- Age
- 45
Sweet lookin truck.Added some chase lights. Or should I say, a state of the art tailgater deterrent system?
Lights are Strands Siberia RP’s. They have the option to run either an amber or red DRL similar to how my A pillar lights have the amber or white DRL.
Brackets are a universal style chase light bracket made by GODZ MFG. These brackets have two mounting points per side and the design allows for both a light and antenna to be mounted if desired. I mainly went with these because they work with most tonneau covers on the market.
View attachment 165940
View attachment 165941
View attachment 165942
Sent from my SM-G781U1 using Tapatalk
Biggiehorn
Ram Guru
Thank you!
5G_DarkSide
New Member
These look fantastic Biggie...mean lookin truck you got thereAdded some chase lights. Or should I say, a state of the art tailgater deterrent system?
Lights are Strands Siberia RP’s. They have the option to run either an amber or red DRL similar to how my A pillar lights have the amber or white DRL.
Brackets are a universal style chase light bracket made by GODZ MFG. These brackets have two mounting points per side and the design allows for both a light and antenna to be mounted if desired. I mainly went with these because they work with most tonneau covers on the market.
View attachment 165940
View attachment 165941
View attachment 165942
Davidbt
Well-Known Member
Old thread. I relate, I had a 2018 3500 6.7 SLT built like a Big Horn. I really miss that truck.
W Six
Active Member
- Joined
- Jun 25, 2023
- Messages
- 177
- Reaction score
- 160
- Points
- 43
- Age
- 65
@Littlejoe81, thanks for sharing. I did’t realize Bedrug offered the floors portions only.
I finally got around to improving the bump-stop gap situation after gaining 2" of lift with the icon springs. I got the timbrens from a forum member and just got the 2" brackets a few days ago.
jl13
Ram Guru
- Joined
- May 28, 2021
- Messages
- 1,234
- Reaction score
- 1,146
- Points
- 113
- Age
- 44
- Location
- boyle heights, CA
Even the chicken is amaze by that mod.
CHeYeNNe71
Spends too much time on here
The little things,
OEM LED black housings, Mopar intake and the Edge Pulsar box. I can't wait to get my Carven exhaust installed
OEM LED black housings, Mopar intake and the Edge Pulsar box. I can't wait to get my Carven exhaust installed
Last edited:
boogielander
Spends too much time on here
- Joined
- Jun 29, 2022
- Messages
- 3,305
- Reaction score
- 5,359
- Points
- 113
So last camping trip I went on I had to go through some bumpy, side-to-side rocking, rock gardens. That side-to-side action made everything in the backseat slide around and bump into each other, especially the fridge and the Ecoflow power station and add-on battery that are stacked. It got so annoying that I found a campsite, stopped, and told the caravan to keep exploring while I was done driving and come back when they're done.
That pushed something I had on the to-do list all the way up to first priority.
After some R&D, I came up with this design where its primary purpose is to allow me to secure my fridge and my Ecoflows down. This is just the first version that I will test its effectiveness in the next trip, and eventually I will make it with metal.
I elected to use plywood because it's cheaper and I can cut it without any special tools, while also allowing me to test the functionality of my design.
Stay tuned for how it goes (we shall see next weekend)!
That pushed something I had on the to-do list all the way up to first priority.
After some R&D, I came up with this design where its primary purpose is to allow me to secure my fridge and my Ecoflows down. This is just the first version that I will test its effectiveness in the next trip, and eventually I will make it with metal.
I elected to use plywood because it's cheaper and I can cut it without any special tools, while also allowing me to test the functionality of my design.
Stay tuned for how it goes (we shall see next weekend)!
Insanity
Ram Guru
- Joined
- Apr 14, 2023
- Messages
- 814
- Reaction score
- 1,073
- Points
- 93
- Age
- 40
I drove it to pick up and drop off the kids for the weekend. I won't be doing very much of anything anytime soon. I fell out of a work truck ,not my pete, and the fall out from that has not gotten any better. Daily back and neck pain along with headaches that make me see double daily.
I am a mover until I run out of steam for the day, this is torture to sit still all day. I can't even pick up my 2yo son without being in pain. Lets just say I was not being a very good father this weekend and being in pain is no excuse to act that way.
I am a mover until I run out of steam for the day, this is torture to sit still all day. I can't even pick up my 2yo son without being in pain. Lets just say I was not being a very good father this weekend and being in pain is no excuse to act that way.
I have the system from Net audio. You keep all your under seat storage and your bass is improved greatly for those who aren’t wanting 2 subs. Trust me it’s more than enough for what I want
I did the same opted out of the full carpet and I like it much better the way it is
Used it for run to Walmart for some Rust reformer, brake cleaner and differential fluid for step sons truck. Had to replace his leaf spring u-bolts so cleaned things up and painted while it was apart and changed diff fluid since so didn't k ow last time it was done or if it was ever done. Was also teaching moment for him working on his own truck. 
