2019+ Rams with Lifts/Levels, and/or aftermarket wheel tire setups

[sgk]

I was debating a level. What are your thoughts? I like the idea of a bit taller, and level, but dont know if I want the added gap it would give me in the wheel well.

The beauty is that it should only raise the front so the spacing should look just like your spacing in the back. (possibly another 1" at most in the back if anything)
If you find the gap is too much I will take those tiny wheels from you, no need to stress.

 

[ksn240]

Anybody know if the TPMS sensors work from the previous model? Or does it require the new 2019 TPMS sensors? I see it is a different part #.

 

[Jared B]

I've heard the older ones won't work.

 

[SpeedyV]

I was debating a level. What are your thoughts? I like the idea of a bit taller, and level, but dont know if I want the added gap it would give me in the wheel well.

I wouldn't do it, but I personally think it looks silly to see a truck squatting down in the back when loaded or towing. Now, if you're rarely doing those things, or you have an auto-leveling air suspension, then it's a different equation!

 

[ksn240]

I've heard the older ones won't work.

That's what I figured. Guess I'll be spending a little extra money for the newer ones then. Look like they are about $50 a pop.

 

[ksn240]

I was debating a level. What are your thoughts? I like the idea of a bit taller, and level, but dont know if I want the added gap it would give me in the wheel well.

I would go for it, it makes a huge difference and I think it makes it look alot better. It's all personal preference. With your wheels and tires I think it would look great. If you haul alot of stuff in the bed or tow alot I would look into getting some helper airbags for the rear, otherwise when you tow your rear end will be squatting down.

I will be leveling mine soon. I love the look of the Readylift 3.5 SST but am afraid it may cause some issues because of the angles, even though they are nowhere near as bad as their past kits. I'll most likely be going with the Readylift 2" strut extension leveling kit.

 

[BZ23]

I would go for it, it makes a huge difference and I think it makes it look alot better. It's all personal preference. With your wheels and tires I think it would look great. If you haul alot of stuff in the bed or tow alot I would look into getting some helper airbags for the rear, otherwise when you tow your rear end will be squatting down.

I will be leveling mine soon. I love the look of the Readylift 3.5 SST but am afraid it may cause some issues because of the angles, even though they are nowhere near as bad as their past kits. I'll most likely be going with the Readylift 2" strut extension leveling kit.

Thanks

 

[BZ23]

The beauty is that it should only raise the front so the spacing should look just like your spacing in the back. (possibly another 1" at most in the back if anything)
If you find the gap is too much I will take those tiny wheels from you, no need to stress.

Lmao. Thanks. I'll keep it mind

 

[BZ23]

I wouldn't do it, but I personally think it looks silly to see a truck squatting down in the back when loaded or towing. Now, if you're rarely doing those things, or you have an auto-leveling air suspension, then it's a different equation!

Rarely towing. Thanks for the info

 

[ksn240]

Anybody know if 275/65s will fit without the level kit? I'm still torn between my options and want to put my wheels on asap. I imagine they would as I was able to put them on a 2013 Ram 2wd stock.

Also, for those of you waiting for the Readylift 3.5" kit, it is now in stock on their site.

 

[DSOOBY]

For anyone waiting to get their Readylift 3.5 Kit, it should be soon. Mine is supposed to be on my doorstep this evening. Kit wheels and tires will be on Thursday, i cant freakin wait!

 

[warmachine]

33x12.5x20 Nitto Ridge Grapplers LT
20x9 Fuel Assault
No Spacers
No Lift
No Leveling
No Rubbing

View attachment 732
View attachment 733

Do you know what the backspacing is on your new wheels? I want to order some 22x10 Fuel Sledge wheels and 33x12.5x22s

 

[BZ23]

Do you know what the backspacing is on your new wheels? I want to order some 22x10 Fuel Sledge wheels and 33x12.5x22s

I am not entirely sure, but I submitted my truck on customwheeloffset.com and It says backspacing 5.
https://www.customwheeloffset.com/wheel-offset-gallery/403205/2019-ram-1500-fuel-assault-stock-stock

 

[DSOOBY]

First real mods to the truck, turned out great, still rides awesome!

Lift: 3.5" Readylift SST
($919 Shipped, $400 install and alignment)
Wheels and Tires: Hostile Rage 20x10 -18 offset, 305/55/R20 Nitto Ridge Grapplers
($2750 from Custom Offsets)

 

[Jared B]

View attachment 837 View attachment 839 View attachment 838

That looks killer!

 

[DSOOBY]

That looks killer!

Thanks! I love the way it turned out, it’s exacty how I had it in my head.

 

[ksn240]

Looks great. Putting my level on Saturday. Already put my wheels and tires on.

 

[mikemcfarland]

View attachment 839 View attachment 844 View attachment 842 View attachment 840

Hey @DSOOBY You should post WITH your pictures exactly what you did -level? size of tires/rims/offset etc. cost would be informative too. p.s. GREAT looking truck - WELL DONE!!!!! i know u posted it earlier but to have the info with the pictures would be very beneficial.

 

[BZ23]

View attachment 839 View attachment 844 View attachment 842 View attachment 840

Wow, that is bad ***. Well done. Can I ask if your tire pressure sensors work? Mine are not and haven't since I put my wheels on. Can you tell me which ones you used? Dealer and tire shop pointing their fingers at new technology. Meanwhile I'm stuck with error messages

 

[RAM 4times]

View attachment 839 View attachment 844 View attachment 842 View attachment 840

good for you bud! the rims makes it kick ***! enjoy.