5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

What did you do to your Ram today???

vegasandre

Active Member
Joined
Dec 10, 2020
Messages
68
Reaction score
78
Agreed. Good for him - he shouldn’t be ashamed of doing well with his business.
Personally, I make it a point not to flaunt nice things when I go in for negotiations with developers. It would be pretty hard to cry “poor” while standing in front of a $90k truck.
It is a weird deal with expensive cars and contractors.. I do a lot of house flipping etc.. and for me it's a red flag is when the contractor comes over with a more expensive car than I have or he doesn't have a truck.
there is nothing wrong with it..but it makes you analyze the situation a little more closely.
 

Fatherdeath

Active Member
Joined
Jul 19, 2021
Messages
93
Reaction score
114
Location
Arizona
What was the trick to remove the sticky stuff? Thanks
heat the body and adhesive with a heat gun till the metal is just barley uncomfortable hot, then slowly with a thumb roll it off, once its all off some rubbing alcohol and a old microfiber towel you rub off the rest then through that towel away since you cant get it out
 

HeavyRotation

Active Member
Joined
Feb 23, 2021
Messages
124
Reaction score
129
Location
Ugeen Orygun
Installed a Truxedo Sentry tonneau. Looks good, seems to seal up pretty tight. Got tired of air mattresses and stuff blowing out of my bed haha.
 

‘19ramlveryeha

Well-Known Member
Joined
Jun 9, 2019
Messages
343
Reaction score
224
When you cut him a check, ask if you should write it to Chrysler Financial direct or if the guy from the last job already paid it off for him. It is brazen for a contractor to flaunt profits in the face of a customer or even emoyees for that matter.

What. So he has to hide his truck hahahaha. Hilarious.


2019 Ram 1500 ORP “long bed” - setting #5 bilsteins, 2”mopar ucas, hellwig sway bar, tonneau cover, bed mat, 20” Laramie sport wheels on 285/60r20 falkens. Flowmaster outlaw.
 

Mountain Whiskey

Spends too much time on here
Joined
Mar 2, 2021
Messages
3,036
Reaction score
6,730
What. So he has to hide his truck hahahaha. Hilarious.


2019 Ram 1500 ORP “long bed” - setting #5 bilsteins, 2”mopar ucas, hellwig sway bar, tonneau cover, bed mat, 20” Laramie sport wheels on 285/60r20 falkens. Flowmaster outlaw.
It's the appearance of doing business. You will wear out a work truck in no time just in miles.if you want to make his payments so he can do that. More power to you.

Some contractors think homeowners are folks that need work done and should be charged a fair profit for their efforts. Some contractors think homeowners are total lacking that should be fleeced at any chance as quickly as possible so they can move on to the next one. Just depends on the contractor you hire.
 

Cliffrunner88

Ram Guru
Joined
Mar 31, 2021
Messages
623
Reaction score
490
Not really sure what thread simple questions belong in (maybe someone can help me out there), but I didn’t feel it was worth a brand new post for what is probably a dumb question.
What is this little light for? Or is it just the ambient night lighting?
2916CB19-67E1-44A0-8ED3-531A08E3D7EB.jpeg

Also, saw one of these in the wild the other day. Looks better on the road than on the lot.
0C5C667D-3EAE-4A90-817C-FE9A53CB80B5.jpeg
 

MurphBigHorn

Ram Guru
Joined
Jun 25, 2021
Messages
572
Reaction score
606
Not really sure what thread simple questions belong in (maybe someone can help me out there), but I didn’t feel it was worth a brand new post for what is probably a dumb question.
What is this little light for? Or is it just the ambient night lighting?
View attachment 101514

Also, saw one of these in the wild the other day. Looks better on the road than on the lot.
View attachment 101515

The light shines down on Center consul. Light drink area. I assume to help at night seeing.
 

Idahoktm

Spends too much time on here
Joined
Apr 27, 2021
Messages
3,814
Reaction score
4,917
Location
North Idaho
It's the appearance of doing business. You will wear out a work truck in no time just in miles.if you want to make his payments so he can do that. More power to you.

Some contractors think homeowners are folks that need work done and should be charged a fair profit for their efforts. Some contractors think homeowners are total lacking that should be fleeced at any chance as quickly as possible so they can move on to the next one. Just depends on the contractor you hire.
Why do you care about him wearing out his TRX? It's his choice. Maybe his work truck was in the shop or one of his employees needed it or maybe he just enjoys driving his new toy.

My contractor pulled up to my house in his helicopter, well he hovered above it. Not once did I think I was paying him too much.
 

Ever_Garza

Active Member
Joined
May 29, 2021
Messages
54
Reaction score
55
60f1a5e9390db622d62df529970e70e7.jpg

a625e5f6ebc598ec925a9d206ad5ad11.jpg

Installed sway bar and TRX hooks


Sent from my iPhone using Tapatalk
 

Mountain Whiskey

Spends too much time on here
Joined
Mar 2, 2021
Messages
3,036
Reaction score
6,730
Why do you care about him wearing out his TRX? It's his choice. Maybe his work truck was in the shop or one of his employees needed it or maybe he just enjoys driving his new toy.

My contractor pulled up to my house in his helicopter, well he hovered above it. Not once did I think I was paying him too much.
Oh, I don't care. I'm not the one he is fleecing.

If you hired a contractor that came over in his chopper to hover around and perhaps give a wave and you did not think anything of it huh? 😏 Please give me a shout next time you need some work. I accept cash, gold bullion and for a small premium I can deal in Bitcoin. We can meet at the marina when you are ready to make your down-payment on my yacht.
 

‘19ramlveryeha

Well-Known Member
Joined
Jun 9, 2019
Messages
343
Reaction score
224
It's the appearance of doing business. You will wear out a work truck in no time just in miles.if you want to make his payments so he can do that. More power to you.

Some contractors think homeowners are folks that need work done and should be charged a fair profit for their efforts. Some contractors think homeowners are total lacking that should be fleeced at any chance as quickly as possible so they can move on to the next one. Just depends on the contractor you hire.

That’s ridiculous. You are willing to judge him on his vehicle versus the work. Some would look at that and say wow. Dude does such a good job he daily drive a Trx. So silly.


2019 Ram 1500 ORP “long bed” - setting #5 bilsteins, 2”mopar ucas, hellwig sway bar, tonneau cover, bed mat, 20” Laramie sport wheels on 285/60r20 falkens. Flowmaster outlaw.
 

‘19ramlveryeha

Well-Known Member
Joined
Jun 9, 2019
Messages
343
Reaction score
224
Why do you care about him wearing out his TRX? It's his choice. Maybe his work truck was in the shop or one of his employees needed it or maybe he just enjoys driving his new toy.

My contractor pulled up to my house in his helicopter, well he hovered above it. Not once did I think I was paying him too much.

My clients all drive 100k+ trucks to he job site. Some use it to haul heavy equipment. Some do it because they can. Hahaha. People are so silly.


2019 Ram 1500 ORP “long bed” - setting #5 bilsteins, 2”mopar ucas, hellwig sway bar, tonneau cover, bed mat, 20” Laramie sport wheels on 285/60r20 falkens. Flowmaster outlaw.
 

BowDown

Spends too much time on here
Joined
Mar 20, 2020
Messages
3,348
Reaction score
3,445
Location
Frisco TX
My clients all drive 100k+ trucks to he job site. Some use it to haul heavy equipment. Some do it because they can. Hahaha. People are so silly.


2019 Ram 1500 ORP “long bed” - setting #5 bilsteins, 2”mopar ucas, hellwig sway bar, tonneau cover, bed mat, 20” Laramie sport wheels on 285/60r20 falkens. Flowmaster outlaw.

Yeah, this really makes no sense when you can option a Ram 1500 to 75k+.
A 2500 or 3500 from Ford, GM or Ram can easily pass $100k.
I'd base a decision for a contractor off his work, not what they drive.
 

VectorZ

Ram Guru
Joined
Jan 26, 2018
Messages
631
Reaction score
602
Location
Alaska
It's the appearance of doing business. You will wear out a work truck in no time just in miles.if you want to make his payments so he can do that. More power to you.

Some contractors think homeowners are folks that need work done and should be charged a fair profit for their efforts. Some contractors think homeowners are total lacking that should be fleeced at any chance as quickly as possible so they can move on to the next one. Just depends on the contractor you hire.
FYI, this contractor was subbed by another contractor I hired. He did the job and a bunch of of other work for free. He used to work at Intel in Oregon and has tons of money. He just likes staying busy and helping people. I actually posted these same photos on the 5th gen FB page and it went so far off the rails I ended up nuking the entire post. People do make money in lots of ways cryptocurrencies, rental properties and so on. I never judge anyone for where they live or what they drive as you have no idea of their paths through life.
 
Last edited:

WReckeR

Well-Known Member
Joined
Jan 10, 2021
Messages
374
Reaction score
348
Location
Indianapolis
60f1a5e9390db622d62df529970e70e7.jpg

a625e5f6ebc598ec925a9d206ad5ad11.jpg

Installed sway bar and TRX hooks


Sent from my iPhone using Tapatalk
I have my eye on those hooks as well. Rear to tow others, front to be towed. Who wants to pull someone out of a ditch in reverse?

I thought I read that installation is a bit tricky due to the spare tire??
 

Ever_Garza

Active Member
Joined
May 29, 2021
Messages
54
Reaction score
55
I have my eye on those hooks as well. Rear to tow others, front to be towed. Who wants to pull someone out of a ditch in reverse?

I thought I read that installation is a bit tricky due to the spare tire??

Sway bar helps so much. I have it on the stiffest and I definitely notice a difference.

The install on the rear tow hooks were super easy. I didn’t have issues with my spare tire in the way


Sent from my iPhone using Tapatalk
 

vinnieloo

Active Member
Joined
Jun 6, 2020
Messages
159
Reaction score
114
Location
Upstate NY
Installed the DeeZee tie downs. Would recommend. 250# limit each. Comes with OEM-style hex shaped nutserts and a great little ball bearing tool to set the nutserts. I used a small file and box cutter to remove the spray liner in the hex holes. Nutserts slid right in. Easy to do both in 15 min. 5mm allen wrench and 10mm box end wrench for the nutsert tool and 4mm allen wrench for the screws.
20210801_085603.jpg
 

Dogpatch

Ram Guru
Joined
Jun 13, 2020
Messages
757
Reaction score
2,011
Location
Coldstream, BC
When you cut him a check, ask if you should write it to Chrysler Financial direct or if the guy from the last job already paid it off for him. It is brazen for a contractor to flaunt profits in the face of a customer or even emoyees for that matter.
Don’t judge him by what he drives, judge him by his references, the bid he presented and how busy he is. If you do your due diligence, you’ll have checked his references and gotten more than one bid.
Your comments are old school thinking.
Today, it’s more “He’s driving a nice truck, so he must work hard and be successful enough to afford it”
In this day and age, most successful trades people today aren’t driving a 98’ rust bucket and are able to start a job the next day. Not to say that this can’t be true, or that the guy with the new truck isn’t drowning. Just that it’s not the norm.
 

Users who are viewing this thread

Top