What did you do to your Ram today???

[Le_Slacker]

Just dropped this off for tint

Update in 4 or so hours !

 

[antwon412]

That is a great color.

Just dropped this off for tint

Update in 4 or so hours !

 

[Le_Slacker]

That is a great color.

This is an awesome color

Debated between it and pearl blue - even put it to a vote with friends and family. Collectively, they picked blue.
I figured if I got blue I’d always think about this one. I never think about the blue one

Previous car/truck history was a lot of black, too many whites.... my daughter pleaded not to get black again (she did want yellow)

Love how black looks on this color. Can’t wait to see the tint done!

 

[tom318]

Just dropped this off for tint

Update in 4 or so hours !

Those look sooo good! I just picked up Laramie with the sport appearance pack but these just look better. I can never tell exactly from the picture but are all the emblems (RAM, 4x4) flat black or are they a very dark gray?

 

[puba08]

PRO-TRUCK DAMPER 2019 RAM 1500 FT

Eibach engineers, manufactures, and sells the highest quality performance aftermarket suspension products in the world.

eibach.com

Just ordered a pair of those for my truck.

Are there any limitations to watch notch you can use with these? I have the ORP.


Sent from my iPhone using Tapatalk Pro

 

[Le_Slacker]

Those look sooo good! I just picked up Laramie with the sport appearance pack but these just look better. I can never tell exactly from the picture but are all the emblems (RAM, 4x4) flat black or are they a very dark gray?

I Believe flat black
Isn’t very dark gray, black?

Eyes being not what they used to be, I’d say black. But when this is released from the tinters, I’ll take a closer/longer look

 

[Grape_Ape]

Are there any limitations to watch notch you can use with these? I have the ORP.


Sent from my iPhone using Tapatalk Pro

I'd assume they're just like the Bilsteins and you don't need to go over a certain height. That's how I'm treating mine.

 

[RamRebelSteel]

 

[z0n3]

Picked up my new 2021 Laramie Quad-cab EcoDiesel tonight. Such a sexy beast. Now its time to get her rugged. Looove the drive, so smooth. Traded in my 2017 Rebel and this definitely is the best upgrade.

Awesome looking truck!!

 

[Le_Slacker]

Just dropped this off for tint

Update in 4 or so hours !

And done

Didn’t want it too dark and was mostly in it for the ceramic
35% all around, including sunroof
70% windshield

Driving in full sun (obviously all closed up) and can already feel how much better this will be !

 

[ChimneyJim]

Schildmeier Stake Pocket Covers. Much better.

 

[craigsaft]

Hey everyone, I am a proud new owner of a 2020 RAM 1500 Laramie and I am looking to add nerf bars to my truck. I have been looking at the Ionic 5" black curved nerf bars but I am still undecided. Does anyone already these installed? Any recommendations?

 

[BowDown]

And done

Didn’t want it too dark and was mostly in it for the ceramic
35% all around, including sunroof
70% windshield

I did the same thing including the windshield and the sunroof panels, makes a huge difference on the heat allowed in. Hopefully it will protect my dash too

Driving in full sun (obviously all closed up) and can already feel how much better this will be !

 

[RamRebelSteel]

Schildmeier Stake Pocket Covers. Much better.

View attachment 71913

Where did you order from? Part number?

 

[Wsmith]

Where did you order from? Part number?

I searched on Amazon and found them.

 

[LGBarnett]

I installed Train Horns on Ram Vader!

Since I changed my tires to a larger size, the factory spare tire was worthless to me. I wanted to see if I could install and on board air system with a 5 gallon air tank and VERY LOUD and large Train Horns in that space without removing the heat shields. I went with the Kleinn Problaster HK9 - 150 psi System with the demon 730 train horn kit. I also decided to upgrade to the ultra blastmaster valve upgrade. The blastmaster valve upgrade gives each horn its own solenoid with a half inch airline to each horn making them even LOUDER. I figured what the hell, go big or go home! I love the saying on the box that the train horns came in. It states “ Too loud? Too bad! “ Holy ****, these horns shake the ground. They are so LOUD! The instructions stated not to mount the air compressor upside down due to overheating. So off to Lowe’s I went and bought some metal and brackets and made my own mounts for everything. I am not a welder so I went with the bolt on method. I used nylon locknuts everywhere so nothing should come loose due to vibration I spliced into the factory horn wire. I wired The air compressor pressure switch and Train Horn solenoids into my trigger 4 Plus 30 amp switch # 1. That way I can turn them on or off as needed. I still have just the factory horn when the trigger switch # 1 is off. I also ran the air filter for the compressor into the driver side ram box. It worked out perfectly because there are grommets at the bottom of the ram boxes. I just removed the grommet and ran the quarter inch airline and screwed on the air filter. Now the air compressor will have clean dry air all the time.

Sent from my iPhone using Tapatalk

Remind me not to get behind you!

 

[Jako]

Where did you order from? Part number?

Stake Pocket Hole Covers Caps Plugs 2019-2024 Ram Bed Rail Accessories Set of 2 | eBay

They require a different cover. See pictures. Two covers are included in the set. One for the left rail stake pocket and one for the right rail stake pocket. NEW 2019-2022 Ram Bed Rail Stake Pocket Covers.

www.ebay.com

Stake Pocket Hole Covers Caps Plugs 2019-2020 Ram Bed Rail Accessories Set of 2

 

[vincentw56]

I have those. You can also get them on Amazon.

 

[kliffy77]

Rigid Industries D-XL Pro series ‘Flood-Defused‘ LEDS installed.

 

[ChimneyJim]

Where did you order from? Part number?

ES ENGINEERED BY SCHILDMEIER... https://www.amazon.com/dp/B07NBVL2JB?ref=ppx_pop_mob_ap_share