5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Updated 2" Mopar Lift/Level Kit - Discussion

JR427

Member
Joined
Oct 14, 2019
Messages
13
Reaction score
8
No he doesn’t, you can’t install this kit with air suspension...
I haven't read this whole thread so maybe this question has been answered. I am purchasing a 2020 Laramie 4WD 5'7" crew cab. I would like to level it without raising the rear. I don't plan on any larger tires than 33" diameter. Considering two options: 1) Readylift leveling kit including UCA's
2.) Mopar 2" lift kit used for the front only and selling the rear shocks. I understand this will be more expensive, but am willing to do it if it will be better...and it will be under warranty. Any comments on which would do the best job and give the best ride? Thanks for any info.
 

ksn240

Ram Guru
Joined
May 18, 2018
Messages
1,273
Reaction score
800
I haven't read this whole thread so maybe this question has been answered. I am purchasing a 2020 Laramie 4WD 5'7" crew cab. I would like to level it without raising the rear. I don't plan on any larger tires than 33" diameter. Considering two options: 1) Readylift leveling kit including UCA's
2.) Mopar 2" lift kit used for the front only and selling the rear shocks. I understand this will be more expensive, but am willing to do it if it will be better...and it will be under warranty. Any comments on which would do the best job and give the best ride? Thanks for any info.
The Mopar would be the best, but also very expensive just for a level. The Readylift with UCAs did not change my ride quality at all. Only the tires did. You can get the Readylift UCAs by themselves off Amazon, then get a MotoFab top had spacer and save a couple hundred bucks than buying the full Readylift kit.
 

Midnight1988

Active Member
Joined
Jul 25, 2019
Messages
63
Reaction score
65
Location
California
I haven't read this whole thread so maybe this question has been answered. I am purchasing a 2020 Laramie 4WD 5'7" crew cab. I would like to level it without raising the rear. I don't plan on any larger tires than 33" diameter. Considering two options: 1) Readylift leveling kit including UCA's
2.) Mopar 2" lift kit used for the front only and selling the rear shocks. I understand this will be more expensive, but am willing to do it if it will be better...and it will be under warranty. Any comments on which would do the best job and give the best ride? Thanks for any info.
I love the Mopar lift kit. I believe it was absolutely worth it and I feel like the ride quality has improved.

 

Todd1500

Active Member
Joined
Nov 23, 2018
Messages
94
Reaction score
27
Thanks for the information. Can anyone confirm this is the # for the ORP springs?
68320249AB
Also, what parameters am I working with when it come to offset on wheels, planning on 33-35” tires. Assuming wheel size doesn’t effect this, only over all tire size.
Not sure what offset fits or doesn't, but I do know that there are different offsets for different wheel widths that have identical back spacing. Offset is a measurement of distance from the center of the wheel. Therefore, the back spacing of +19mm for the OEM 9" wheels will be very different from the back spacing of a set of 14" wide aftermarket wheel. Readylift has a nice calculator on their website that can help you compare your wheels to the OEM wheels. But even then, you still need to ensure the wheels you're looking at clear your brakes. You'll need to double check with your vendor or wheel manufacturer for fitment.
 

JR427

Member
Joined
Oct 14, 2019
Messages
13
Reaction score
8
I love the Mopar lift kit. I believe it was absolutely worth it and I feel like the ride quality has improved.

I like the look of your truck. Appears as though the tires don't stick out past the fender wells. I assume you lifted the back and front and didn't just use the front part of the lift kit?
 

Midnight1988

Active Member
Joined
Jul 25, 2019
Messages
63
Reaction score
65
Location
California
I like the look of your truck. Appears as though the tires don't stick out past the fender wells. I assume you lifted the back and front and didn't just use the front part of the lift kit?
Thanks! Yeah i had them lift the front and back. And the tires don’t stick out at all.
 

JR427

Member
Joined
Oct 14, 2019
Messages
13
Reaction score
8
The Mopar would be the best, but also very expensive just for a level. The Readylift with UCAs did not change my ride quality at all. Only the tires did. You can get the Readylift UCAs by themselves off Amazon, then get a MotoFab top had spacer and save a couple hundred bucks than buying the full Readylift kit.
[/QUOT
The Mopar would be the best, but also very expensive just for a level. The Readylift with UCAs did not change my ride quality at all. Only the tires did. You can get the Readylift UCAs by themselves off Amazon, then get a MotoFab top had spacer and save a couple hundred bucks than buying the full Readylift kit.
Thank you for the reply. Did the Readylift UCA's correct the improper angle of the UCA's you get with just using spacers? Any reason to change to a better ball joint , different springs or anything else with the Readylift kit?
 

ksn240

Ram Guru
Joined
May 18, 2018
Messages
1,273
Reaction score
800
The ball joint angle is much much better with the Readylift UCAs after a leveling kit. The factory ball joint gets put in a bind much easier. You could also do the Mopar UCAs that come with their kit, those can be bought separate. I replaced mine for peace of mind as 4th gens were notorious for the upper ball joint to come out of socket after a level. No need for different springs or anything else.
 

JR427

Member
Joined
Oct 14, 2019
Messages
13
Reaction score
8
The ball joint angle is much much better with the Readylift UCAs after a leveling kit. The factory ball joint gets put in a bind much easier. You could also do the Mopar UCAs that come with their kit, those can be bought separate. I replaced mine for peace of mind as 4th gens were notorious for the upper ball joint to come out of socket after a level. No need for different springs or anything else.
Is there a better ball joint?
 

GraniteRam

Well-Known Member
Joined
Jul 15, 2019
Messages
415
Reaction score
192
I haven't read this whole thread so maybe this question has been answered. I am purchasing a 2020 Laramie 4WD 5'7" crew cab. I would like to level it without raising the rear. I don't plan on any larger tires than 33" diameter. Considering two options: 1) Readylift leveling kit including UCA's
2.) Mopar 2" lift kit used for the front only and selling the rear shocks. I understand this will be more expensive, but am willing to do it if it will be better...and it will be under warranty. Any comments on which would do the best job and give the best ride? Thanks for any info.

Or wait for the Bilstein 5100's to come out.
 

ryanJ

Active Member
Joined
Oct 8, 2019
Messages
31
Reaction score
8
Location
San Diego
Not sure what offset fits or doesn't, but I do know that there are different offsets for different wheel widths that have identical back spacing. Offset is a measurement of distance from the center of the wheel. Therefore, the back spacing of +19mm for the OEM 9" wheels will be very different from the back spacing of a set of 14" wide aftermarket wheel. Readylift has a nice calculator on their website that can help you compare your wheels to the OEM wheels. But even then, you still need to ensure the wheels you're looking at clear your brakes. You'll need to double check with your vendor or wheel manufacturer for fitment.
Great info. appreciate it
 

Alxmlr789

Ram Guru
Joined
Jun 29, 2019
Messages
501
Reaction score
277
Will adding those alone level the truck? I assume the UCA angle would remain "normal" with these? Thank you

You should be fine, the thing about a preload style lift is that it only adds a very marginal height increase to the entire assembly (including the mopar lift, my mopar assembly only added about .3" total shock height but 2" total lift on the ground). The lift is achieved moreso by stiffening the spring preload. So at full down travel, the ball joint is not really stressed much past stock.

When you use a top or bottom spacer style lift, it increases the height of the entire assembly so puts a large amount of stress on the ball joint during downward travel, therefore needing a different ball joint angle.
 

agjr85

Well-Known Member
Joined
May 22, 2019
Messages
332
Reaction score
94
Location
Spring, Tejas
So does this kit lift the truck 2" all around? or does it mainly level out the front and slightly adjust the rear?

I'm tempted but do not want my rear to go up much.
 

Alxmlr789

Ram Guru
Joined
Jun 29, 2019
Messages
501
Reaction score
277
So does this kit lift the truck 2" all around? or does it mainly level out the front and slightly adjust the rear?

I'm tempted but do not want my rear to go up much.

Lifts the front 2" and the rear 2", my truck stayed 2" higher in the rear after this lift.
 

JR427

Member
Joined
Oct 14, 2019
Messages
13
Reaction score
8
RE; leveling a 2020 1500 Laramie crew cab, 4WD, regular suspension.....thanks for all the prior comments re: leveling this truck. I contacted Bilstein regarding the upcoming B8 5100 shocks. This shock is designed to LEVEL this truck using adjustable snap rings on the shock. Here's what I got from Bilstein...."We're currently in production of the 5100 shock for the new body style Ram pickups. We hope to have these shocks available around the first part of next year. These shocks will install using all factory components. You will not need after market control arms. " I did not get a price (probably isn't available yet). As I understand it, this technology is not new and has been used on other brand trucks. Just the 2019/2020 Ram application is new.
This solution seems to be worth waiting for. Any comments appreciated.
 

tedsterbv

Active Member
Joined
Mar 21, 2019
Messages
26
Reaction score
13
I just got my truck back tonight from the dealership. They installed the Mopar 2" lift kit. I told them about the TSB when I dropped the truck off. When picking the truck up tonight, the service rep stated they installed the lift and followed the TSB. When I got home, I questioned the rake which is very noticeable to me. I still have the stock tires on it. I measured from the center of the wheel hud to the wheel liner above. The front is 6 1/2" and the rear is 10 3/4". Thoughts?


BEFORE
Before.jpg

AFTER

After.jpg
 

Midnight1988

Active Member
Joined
Jul 25, 2019
Messages
63
Reaction score
65
Location
California
I just got my truck back tonight from the dealership. They installed the Mopar 2" lift kit. I told them about the TSB when I dropped the truck off. When picking the truck up tonight, the service rep stated they installed the lift and followed the TSB. When I got home, I questioned the rake which is very noticeable to me. I still have the stock tires on it. I measured from the center of the wheel hud to the wheel liner above. The front is 6 1/2" and the rear is 10 3/4". Thoughts?


BEFORE
View attachment 38512

AFTER

View attachment 38513
Love your setup. I’m running almost the exact thing. Do you have pictures more of the side that show the rake? I feel like mine isn’t as noticeable as before.

before
1571792142662.jpeg

After
A62EE8A2-CB99-457D-8DC9-3C4FD65E3531.jpeg
 

Alxmlr789

Ram Guru
Joined
Jun 29, 2019
Messages
501
Reaction score
277
I just got my truck back tonight from the dealership. They installed the Mopar 2" lift kit. I told them about the TSB when I dropped the truck off. When picking the truck up tonight, the service rep stated they installed the lift and followed the TSB. When I got home, I questioned the rake which is very noticeable to me. I still have the stock tires on it. I measured from the center of the wheel hud to the wheel liner above. The front is 6 1/2" and the rear is 10 3/4". Thoughts?


BEFORE
View attachment 38512

AFTER

View attachment 38513

There should be a 2” difference front to rear, but you want to measure the center of the hub or centercap to the bottom of the wheel well.

That looks very off. Looks like an old dodge roadrunner.

If you can, take a photo of the bottom spring perch on the front Shock, i will be able to tell you if they put the extra ring in there or not. If you want my cell number? Pm me if you’d like to text about it.
 

Users who are viewing this thread

Site Vendors

https://www.jasonlewisautomotive.com/
Top