kittyjo
Well-Known Member
- Joined
- Nov 9, 2018
- Messages
- 473
- Reaction score
- 142
- Points
- 43
- Age
- 61
Wanting to pull trigger on some lights are theses Walmart ones worth the price??? And how are they holding up?
5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
LED Reverse Lights
- Thread starter Kbonk83
- Start date
Neurobit
RAM Sorcerer
MValdez
Ram Guru
I have the Tazer DT... How did you customize your own lightshow?
Lights are still working great. No issues or complaints. I’d recommend them.
kittyjo
Well-Known Member
- Joined
- Nov 9, 2018
- Messages
- 473
- Reaction score
- 142
- Points
- 43
- Age
- 61
Thinking of getting the rigid or black oaks...
I wouldn’t steer you away from those options. Now that I know the setup works, I’d recommend using better lights. Not to say the setup I have is bad or doesn’t work, but there are definitely better lights out there.
kittyjo
Well-Known Member
- Joined
- Nov 9, 2018
- Messages
- 473
- Reaction score
- 142
- Points
- 43
- Age
- 61
Agree just to many options out there and reviews I’ve read point to those 2.....I wud like 2pods in the back and one 20inch Infront. Recommendations are welcomed
cra1g
Well-Known Member
I was going to do the same thing with Rigids. Ordered the lights--got a factory-sealed package with pair of lights, only one mounting bracket, and a wiring harness with only one connector for a light. Contacted warranty support through their website twice and got zero response. I'm sending them back to the vendor for a refund. If my experience is typical of their quality and customer service, you'd be better off with the $12 ones from Amazon.
I ordered a pair of Baja Designs S2 instead.
Neurobit
RAM Sorcerer
Lights installed and work decent, but no match for the LPR. Hopefully they will release an updated model that fixes the rubbing soon. I will re-order if they do.
AartWessels
Active Member
I installed these :
www.aliexpress.com
I just attached them with the included adhesive at the bottom of the bumper, just to the left and right from the tow hook, and they perform great.
Still holding on strong, even after some pressure washes, and the additional light they give is great.
US $7.35 23% OFF|2pcs 7030 Waterproof Car Styling SMD Daytime Running Light 14 LEDs Car DRL Led Strip Daylight|led car drl|car drldaytime running - AliExpress
Smarter Shopping, Better Living! Aliexpress.com
www.aliexpress.com
I just attached them with the included adhesive at the bottom of the bumper, just to the left and right from the tow hook, and they perform great.
Still holding on strong, even after some pressure washes, and the additional light they give is great.
Matthbert5150
Active Member
- Joined
- Aug 25, 2019
- Messages
- 65
- Reaction score
- 46
- Points
- 18
- Age
- 42
Do you have any pictures?I installed these :
US $7.35 23% OFF|2pcs 7030 Waterproof Car Styling SMD Daytime Running Light 14 LEDs Car DRL Led Strip Daylight|led car drl|car drldaytime running - AliExpress
Smarter Shopping, Better Living! Aliexpress.com
I just attached them with the included adhesive at the bottom of the bumper, just to the left and right from the tow hook, and they perform great.
Still holding on strong, even after some pressure washes, and the additional light they give is great.
2019 Ram 1500 Laramie Rambox, 5.7l 4x4 3.92, Pano Sunroof, level 2 w/ 12", black appearance package, adv. Safety group, Power running boards, full ceramic tint
6" ProComp Stage 1 lift kit with 35x12.50r20 Nitto Ridge Grappler tires
20x10 - 24 fuel hostage wheels
Tazer DT, Lomax cover, Bed Rug.
*Future Mods"
Borla s-type exhaust, Mishimoto Catch Can
AartWessels
Active Member
I only have some pictures of the light effect, not of the way they look installed, I can see if i can take a pic in the coming days, but days are getting short here already, so not much daylight when I leave the office
managed to take some pictures at the gas station:
Last edited:
Semobrewer
New Member
- Joined
- Sep 2, 2019
- Messages
- 2
- Reaction score
- 4
- Points
- 3
- Age
- 41
How are these holding up? Any issue with adhesive coming loose?I installed these :
US $7.35 23% OFF|2pcs 7030 Waterproof Car Styling SMD Daytime Running Light 14 LEDs Car DRL Led Strip Daylight|led car drl|car drldaytime running - AliExpress
Smarter Shopping, Better Living! Aliexpress.com
I just attached them with the included adhesive at the bottom of the bumper, just to the left and right from the tow hook, and they perform great.
Still holding on strong, even after some pressure washes, and the additional light they give is great.
AartWessels
Active Member
Still a happy camper. Adhesives are still going strong, and have been through the carwash with high pressure washers quite some times. No real cold temperatures here yet, but enough rain. No problem so far. Can’t be beat for this price I guess.
zlman
Active Member
- Joined
- Jan 11, 2020
- Messages
- 159
- Reaction score
- 122
- Points
- 43
- Age
- 55
Ordered, these are the most low profile option I've seen used. Thanks for the link!I only have some pictures of the light effect, not of the way they look installed, I can see if i can take a pic in the coming days, but days are getting short here already, so not much daylight when I leave the office
View attachment 37945View attachment 37946
managed to take some pictures at the gas station:
View attachment 37988View attachment 37989View attachment 37990
stepbill
Active Member
- Joined
- Mar 4, 2019
- Messages
- 106
- Reaction score
- 32
- Points
- 28
- Age
- 68
- Location
- Aberdeen, North Carolina
I am ordering the Rigid SRQ pro diffused back up light from Amazon (2 lights included) along with the Curt trailer splitter and was wondering how you tied into the harness? Will I have to tie in two separate areas for each light and did you use clip on wire connectors? Thanks for any help!
zlman
Active Member
- Joined
- Jan 11, 2020
- Messages
- 159
- Reaction score
- 122
- Points
- 43
- Age
- 55
Installed the Curt Y harness this morning, now to wait for the aliexpress order to arrive. Harness was a breeze to install, 10 min tops, covered all connections with a solid coating of dielectric grease.
Not too enthused about using the tape option to attach, going to investigate my options for that.
Not too enthused about using the tape option to attach, going to investigate my options for that.
JJRamTX
Ram Guru
Somehow I missed this post. Did you get your custom light show configured using your computer attached to the Tazer? There is a software on their website that you can download and then use to configure your Tazer DT while it is out of the truck connected via USB to your computer and you can also update the Tazer Software if you don't have the latest version.
Jako
Spends too much time on here
Additional info below. I finished the install last week (posts 27 & 28).
OEM LED reverse lights are absolutely terrible...what have you guys done to address this?
Finished, these are the Rigid Ignite diffused. Made a big difference! Really would like to see how you mount those on bumper in daylight. Thanks.
5thgenrams.com
